You searched for: Samplers

Supplier: VWR Collection

The SAS Super IAQ provides the same efficiency as recorded by sampling tests conducted by Centre for Applied Microbiology & Research (CAMR-UK).

Supplier: VWR Collection

Multi-sectored samplers for sampling powders, pellets and friable materials, which may become non homogeneous in bags at various levels. The models with separate sections are mainly used for chemical or physical analysis; models with communicating sections are used for microbiological analysis.

Supplier: Avantor

Cycle-Tap sampler is a device for sampling small quantities of solvent.

Supplier: Avantor Fluid Handling

WFI Samplers are an easy and convenient solution for obtaining perfect fluid samples from a WFI water drop.

Supplier: VWR Collection

Piston sampler, made from chromium plated brass, sterilisable. The end of the tube is sharp for puncturing boxes, bales or bags containing soft pasty material.

Supplier: Merck

The MAS-100 NT® Ex combines all the advantages of the MAS-100 NT® but, in addition, has been tested for use in areas where there are explosive atmospheres.

Supplier: VWR Collection

SAS Super Pinocchio II is a microbial impaction sampler to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and the flow meter regulated to achieve the required flow rate.

Supplier: VWR Collection

SAS Super Pinocchio CR is a compact microbial impaction sampler designed to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and a flow meter to regulate and achieve the required flow rate.

Supplier: VWR Collection

SAS Super ISO 100 and SAS Super ISO 180 are differentiated by their airflow; this choice depends on the application, and allows continuous or sequential sampling from a few minutes to several hours. The data can be stored on the SAS instrument itself or on any remote PC.

Supplier: VWR Collection

White PTFE ladle.

Supplier: VWR Collection

When environmental contamination is very low, and the number of samples to be performed is high, operational duration can be an important factor in the choice of SAS instrument. Two sampling heads that operate simultaneously to sample 1000 litres of air, in less than 3 minutes, is the solution.

Supplier: VWR Collection

Environmental monitoring in cleanrooms is important and a critical part of the production chain for a manufacturing company.

Supplier: Merck

The perforated sampling head may be sterilised and can be adjusted to sample horizontally.

Supplier: Merck

The MAS-100 VF® uses standard Petri dishes for monitoring the quality of your environment. Its electronic speed control maintains an accurate flow rate. The handle enables the sampler to be mounted onto an optional tripod, thereby allowing testing at different angles for fixed applications. The perforated lid is the same as on the standard MAS-100® sampler.

Supplier: Merck

The MAS-100 Eco® is a robust and reliable air sampler designed for highest precision.

Supplier: Merck

Highest collection efficiency and safety in isolators and rabs with up to four sampling points.

Supplier: BURKLE

This MultiDispo zone samplers for taking samples from multiple layers of the sample material.

Supplier: Merck

The MAS-100 Iso NT® is a high-performance instrument based on the impaction principle. The head (using standard 90 mm Petri dishes) can be installed at the critical control points with all electronic and moving parts kept outside the critical zone.

Supplier: BURKLE

For sampling bulk goods at depths of up to 3,5 metres, depending on the density of the bulk goods to be sampled. Inserting the sampler into the bulk goods closes the collection chamber. At the desired depth, the collection chamber is opened by withdrawing the sampler, the chamber is filled and can be pulled out and collected.

Supplier: Merck

Ease of use. Uncompromising safety. Data integrity and flexibility. This is what the new MAS-100 Atmos® sampler stands for, revolutionising microbiological monitoring of compressed gases.

Supplier: BURKLE

PharmaPicker is designed for sampling very small quantities of highly potent or active powders for analysis. The smallest sample quantities can be collected with the PharmaPicker.

Supplier: Avantor Fluid Handling

Simple and safe removal of liquid samples.

Supplier: BURKLE

The sample is directly extracted into the original sample bottle with screw cap.

Supplier: BURKLE

These core samplers can be used to take samples of bulk materials, which can easily become stuck or settle during sampling due to their particle form.

Supplier: BURKLE

These disposable samplers for the highest standards do not need to be cleaned after use.

Supplier: BURKLE

The Vampire sampler can be used to take samples from liquids easily, even from deeper depths.

Supplier: BURKLE

This ViscoDispo sampler is for highly viscous media up to 100 000 cP. The ergonomically shaped handle and stable drawbar make the sample easier to draw.

Supplier: Hach

The Sludge Judge® sampler is designed to take accurate readings of settled solids, 5% or less, in a variety of liquids to any depth at temperatures up to 74 °C.

Supplier: VWR Collection

The SAS instrument control unit is placed outside and connected to the aspirating head using a simple electrical connection. All possible typical contamination sources from the vacuum sampling system are avoided using the SAS Super Isolator. An interesting application is that several heads can be controlled by a single SAS control unit, providing a practical and economical solution.

Supplier: Trajan Scientific and Medical

This gas and vapour sampler enables spot collection of environmental gas samples or low pressure gas streams in 200 cm³ impervious resealable bags.