You searched for: Pumps

Supplier: Avantor Fluid Handling

Mix, react, and/or separate liquid-liquid mixtures in a single device.

Supplier: AUSTEN CHARLES PUMPS

The Dymax series provide a clean oil-free, vacuum and pressure source around the laboratory. Dymax 14 is ideal for light filtration and water jet replacement. Rated for continuous operation Dymax pumps are lightweight, extremely quiet and ruggedly reliable. They are housed within a tough, splashproof and compact polycarbonate case which conforms to IEC 1010 for safety.

Supplier: HARVARD APPARATUS

The PHD 22/2000 syringe pump series gives you the lowest flow rates, the highest accuracy, the smoothest flow, advanced programmability from the keypad. Ideal for applications in drug/nutritional delivery, electrospinning, microfluidics/nanofluidics and mass spec calibration.

Supplier: NRG DEVELOPMENTS

Piston operated siphon pump. Adjustable bung allows the pump to be used with different containers.

Supplier: Avantor Fluid Handling

Proven design utilizes centrifugal action to remove and concentrate solids.

Supplier: EDWARDS HIGH VACUUM METTLER

Blade kit pump

Supplier: EDWARDS HIGH VACUUM METTLER

These nXDS series pumps are completely oil free, dry scroll and improved on their pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise.

Supplier: Integra

The DOSE IT peristaltic pump makes dispensing of culture media, buffers and other solutions easy and efficient. In addition to the dispensing and pump mode, DOSE IT is able to create customised liquid handling protocols. Easy to follow instructions on the display allow users to set up individual protocols, consisting of consecutive application steps.

Supplier: NRG DEVELOPMENTS

These lift pumps feature plastic sleeved steel piston rods so that only compatible materials comes in to contact with the fluid being handled. The standard adapter will fit for 2" BSB or 2" NPT threads. PP, with PTFE seals.

Supplier: NRG DEVELOPMENTS

These lift pumps feature plastic sleeved steel piston rods so that only compatible materials comes in to contact with the fluid being handled. The standard adapter will fit for 2" BSB or 2" NPT threads. Nylon, with PTFE seals.

Supplier: BUCHI

These V-300 PTFE diaphragm vacuum pumps impresses with its very silent and economical operation. These pumps have been operated at a flow rate of 1,8 m³/h and an ultimate vacuum of 5 mbar.

Supplier: VWR Collection

The VWR® vacuum aspiration system is designed for laboratory waste recovery and the separation of liquids and solids.

Supplier: VACUUBRAND

The VACUU·SELECT complete controller is ready for use with existing vacuum sources like pumps or vacuum networks.

Supplier: VACUUBRAND

The VACUU.LAN local vacuum network connects several workstations to one vacuum pump. The various modules make it possible to connect almost all popular vacuum applications such as rotary evaporators, vacuum concentrators, gel dryers, drying ovens and filter systems. It can be integrated into new laboratory furniture at the time of assembly or subsequently installed in existing laboratories.

Supplier: EDWARDS HIGH VACUUM METTLER

The E1M18 and E2M18 pumps are direct drive, sliding vane pumps. The E1M18 is a single-stage pump, and the E2M18 is a two-stage pump. The pump is oil sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single-phase or three-phase (four-pole) motor.

Supplier: witeg Labortechnik

Water jet pumps made of brass and nickel-plated.

Supplier: Heidolph Instruments GmbH & Co.KG

Models SP quick 1,6 and 2,5 mm.

Supplier: LABCONCO

This vacuum pump is designed for use with aqueous samples that are compatible with FreeZone Freeze Dry Systems, CentriVap Centrifugal concentrators and Protector® Controlled Atmosphere glove boxes. It comes with a single phase direct drive motor, totally enclosed and fan cooled. When the motor overheats, the thermal overload device switches off the pump. When the pump cools down, the motor automatically restarts. Isolation valve seals the inlet to prevent oil and air contamination of the system in the event of power failure.

Supplier: BUCHI

Diaphragm vacuum pump is made up PTFE and it is chemically resistant with a space saving design. It meets all the needs of vacuum generation. It is usable for multiple applications such as evaporation, drying, concentration, suction straining and filteration. It is a maximum longevity product due to robost and stable design and integrated ECO² mode.

Supplier: EDWARDS HIGH VACUUM METTLER

These high performance rotary pumps are used in many industrial and laboratory applications. They offer the option of high throughput or high ultimate vacuum by the adjustment of a single control. RV pumps can be run continuosly with inlet pressures up to 50 mbar or can be set to achieve an ultimate partial pressure of 1×10⁻⁴ mbar. For drying applications the water handling capability is 290 g per hour at vapour pressures up to 80 mbar (RV 12).

Supplier: LABCONCO

Single- or dual-head chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.

Supplier: LABCONCO

Scroll Vacuum Pumps are low maintenence, corrosion resistent pumps that require no oil.

Supplier: EDWARDS HIGH VACUUM METTLER

E2M1,5 two stage oil sealed rotary vane pumps are renowned for achieving high ultimate vacuum and rapid pumping speeds, with quiet operation and compact size.

Supplier: VACUUBRAND

The CVC 3000 detect compact vacuum controller complete with integral vacuum valve and sensor is ready to use either as a bench top or stand mounted unit. The CVC 3000 detect is a compact two-point vacuum regulator, with integrated ceramic vacuum sensor and ventilation valve. The "detect" function provides the ability to recognise and find the boiling pressure and thus greatly facilitates the work of solvent evaporation. With integrated non-return valve and chemistry vacuum valve, it forms a highly compact and easy-to-install unit for vacuum regulation. Used in conjunction with existing vacuum pumps or networks, process efficiency is significantly increased through the "detect" electronic vacuum control, the solvent recovery is increased and the environment better protected. The programmable CVC 3000 detect is available for both bench top and stand mounting operation.

Supplier: EDWARDS HIGH VACUUM METTLER

Pump includes all of the components required for laboratory applications such as those found in wet chemistry and sample preparation. It allows for continuous running even in the presence of water and solvents and incorporates an integral fast acting inlet valve that holds the system under vacuum in case of a power failure. Ideal for use with rotary evaporators, centrifugal concentrators, vacuum ovens, distillation/extraction apparatus, fume hoods, glove boxes and vacuum filtration equipment.

Supplier: AUSTEN CHARLES PUMPS

The Dymax 5 provides a clean oil free vacuum or pressure source. It is rated for continuous operation and is ideal for use in education and general purpose applications such as aeration and vacuum filtration.

Supplier: VACUUBRAND

Versatile, accurate and robust vacuum gauge. Outstanding measurement accuracy thanks to its capacitive, anti-corrosive gauge head with excellent long-term stability and effective temperature compensation. With its robust plastic housing and splash-proof gauge head, the VSK 3000 is ideal for tough applications.

Supplier: VACUUBRAND

The DVR 2pro is a fully electronic, versatile vacuum gauge for the measuring range from atmospheric pressure to 1 mbar.

Supplier: VACUUBRAND

The DCP 3000 is an outstanding vacuum gauge with large illuminated display. The brand new VSP 3000 vacuum sensor is based on thermal conductivity (Pirani) and offers a wide measurement range from atmospheric pressure down to 10 to 3 mbar. The wetted parts are made of chemically resistant plastics (PBT, PUR) and alumina ceramics. It features a much better chemical resistance and ruggedness than conventional Pirani sensors with their fragile metallic spiral-wound filament. Simultaneous connection of up to eight vacuum sensors allows flexible measuring on the spot. The DCP 3000 communicates with external components via the VACUU·BUS® digital bus system. It is characterised by fully automatic configuration, unified plug connections and cable lengths of up to 30 m. In addition the DCP 3000 offers relative pressure measurements (VSK 3000 as reference) and a data logger feature for up to 32000 data values.

Supplier: VACUUBRAND

VACUU·SELECT fine vacuum control packages provide an easy-to-use vacuum control option for work between 1 mbar and 10^-3 mbar, such as freeze drying, Schlenk lines, and molecular distillation. Predefined applications can be adjusted easily, and new applications can be created in a matter of seconds, to meet your precise needs.