Supplier: PHC Corporation

These units are designed for demanding and regulated applications in the biomedical, pharmaceutical, medical research and clinical laboratory. They offer outstanding performance and advanced, multi-level contamination control to provide the ideal solution for cell culture protocols. The patented SafeCell™ UV treats interior airflow to destroy airborne and humidity pan contaminants and inCu saFe copper-enriched stainless steel interior surfaces assure constant germicidal protection. When total chamber decontamination with verification is required, the unique H₂O₂ decontamination option limits downtime to less than three hours.

Supplier: PHC Corporation

These units are designed for critical applications in pharmaceutical, biotechnology and clinical investigation. They can be used for culturing high volumes of patient samples, performing short-term studies, and working with large volume cell culture apparatus. The InCu saFe® copper-enriched stainless steel interior surfaces assure constant germicidal protection. The cross-shelf horizontal air flow system promotes optimum temperature uniformity throughout the incubator and contributes to rapid recovery after door openings.

Supplier: PHC Corporation

MCO incubators maintain a constant germicidal protection with inCu saFe™ a copper-enriched stainless steel interior chamber, HEPA filters and SafeCell™ UV (ultra-violet lamp, integrated in MCO-20AIC but optional for MCO-5AC). MCO-5AC and MCO-15AC utilise Thermal Conductivity (TC) sensors to monitor CO₂ levels whereas MCO-20AIC has unique ceramic-based IR Infrared sensors that deliver accurate CO₂ control with faster recovery after a door opening. Units with user-friendly design, accessories can be easily removed, reversible inner and outer doors, LED digital control and Ø 30 mm access port.

Supplier: LMS

LMS Series 1A cooled incubators are temperature controlled cabinets with fan assisted air circulation via a pre-mixing chamber. The units have a white enamelled sheet steel exterior, white pre-coated aluminium interior and polyurethane foam insulation, and feature a door lock and magnetic door gasket. The inner chamber is easy to clean, disinfection procedures are detailed in the user manual.

Supplier: LMS

LMS Series 4 cooled incubators are temperature controlled cabinets with fan assisted air circulation via a pre-mixing chamber. The units have a stainless steel exterior, stainless steel lined interior with polyurethane foam insulation, and feature a door lock and magnetic door gasket. Corrosion resistant inner chamber is easy to clean, disinfection procedures are detailed in the user manual.

Supplier: PHC Corporation

These cooled incubators are designed to meet a variety of advanced experimental needs, ranging from microorganism cultures and plant germination tests to various constant temperature experiments. Design includes a window made from triple layer glass (which can be shaded), lighting in the chamber (15 Watt), cable pass through as standard. MIR-154/MIR-254 only: Control panel with LCD display. DC fan to protect medium from drying out. Reversible door for left or right-hand door opening. Remote monitoring with DAQ (data acquisition) software. MIR-554: Auto diagnostic function, programmable with up to three steps, 1 to 99 cycles or endless. Programme memory backup for ±5 hours.

Supplier: GENLAB

A range of efficient, reliable, cost effective incubators ideal for biological analysis, research and general laboratory applications. The INC has a horizontal style with the controls fitted to one side of the door. All the models listed below feature an exterior of sheet steel, finished in an easy clean powder coated paint and a stainless steel inner chamber. Units are heated by means of Incoloy sheathed elements; positioned below the chamber floor for natural convection units and fitted around the fan on the back or side wall of the chamber for fan assisted units (200 L only).

Supplier: LMS

LMS Series 2 cooled incubators are temperature controlled cabinets with fan assisted air circulation via a pre-mixing chamber. The units have a white enamelled sheet steel exterior, high impact plastic interior and polyurethane foam insulation, and feature a door lock and magnetic door gasket. The corrosion resistant inner chamber is easy to clean, disinfection procedures are detailed in the user manual.

Supplier: REVCO TECHNOLOGIES

These 8000 WJ Series CO₂ incubators constructed with a triple wall and with a large volume of water provide unsurpassed temperature stability and protection against heat loss. The water jacket technology holds the temperature for extended periods of time, which is critical during power failures.

Supplier: REVCO TECHNOLOGIES

With precise temperature control and stability of all culture parameters, the Series 8000 direct-heat CO₂ incubators offer dependable flexibility for growing cells. The automatic high-temperature decontamination cycle is ideal for overnight sterilisation and ensures consistent sterilisation time after time. Units are light weight and easy to move with accessory roller base, there is a choice of TC or IR CO₂ sensor.

Supplier: CROSSTEX

The digital dry block incubator is designed for convenient and reliable incubation of 1 ml spore ampules, SporView® SCBIs, SporView®10 SCBIs, and traditional SCBIs.

Supplier: LEEC LTD

Cooled incubator made from rust resistant steel finished in tough white polyester powder coated paint with anti-microbial properties. Inner chamber is made from stainless steel and has adjustable anodised aluminium shelves.

Supplier: Hach

Small and lightweight, the unit is ideal for reliable, accurate incubation for total coliform, fecal coliform and E. coli testing. The incubator can be used for Presence/Absence (P/A), Membrane Filtration (MF) and Most Probable Number (MPN) procedures.

Supplier: THERMO FORMA

CO₂ incubators with HEPA filtration system to provide continuous protection against airborne contaminants with high-temperature sterilisation cycle that simplifies routine cleaning practices. Made of stainless steel interior with coved corners for easy cleaning, units have stainless steel shelves and supports are designed to support a full product load.

Supplier: LEEC LTD

LEEC Classic incubators have fully sealed chambers manufactured from polished stainless steel with rounded corners for easy cleaning. The outer cabinet is manufactured from stainless steel, and has a tough powder coat paint finish. This gives the incubator exceptional corrosion resistance. An inner glass viewing door closes positively onto a silicone gasket and allows a clear view of the chamber contents without disturbing the internal atmosphere. The outer door has a magnetic gasket providing a good seal. A rear access port allows temperature monitoring probes to be inserted safely into the incubator chamber.

Supplier: LTE SCIENTIFIC

The Swallow incubators are simple to operate and are controlled by means of a microprocessor system, offering precise temperature control, fast heat-up times and almost undetectable overshoot.

Supplier: Hettich

The HettCube range of incubators provide functionality and customised features. The inner chamber is made from acid-proof stainless steel (DIN 1.4301). Units only heat and cool as necessary, ensuring lower power consumption, operating costs and environmental impact. At an operating temperature of 37 °C the units consume less than 0,05 kWh. The fan is located outside the usable space, so there is a low air flow inside the chamber and a low noise level.

Supplier: 3M MEDICAL

3M™ Attest™ incubators provide optimal conditions for accurate readout using biological indicators.

Supplier: Thermo Fisher Scientific

Heratherm™ CO₂ incubators offer exceptional environmental control in a hassle-free chamber that is easy to program and use.

Supplier: Hettich

The HettCube range of cooled incubators provide functionality and customised features. The inner chamber is made from acid-proof stainless steel (DIN 1.4301). Units only heat and cool as necessary, ensuring lower power consumption, operating costs and environmental impact. At an operating temperature of 37 °C the units consume less than 0,05 kWh. The fan is located outside the usable space, so there is a low air flow inside the chamber and a low noise level.

Supplier: LEEC LTD

They are suitable for warming bottles, bags of fluid/saline, and blankets to 37 °C or above.

Supplier: LTE SCIENTIFIC

The IP Series ™ of incubators is available in different sizes from 60 to 250 L. Fan circulated or natural convection options are avialable, plus there is a choice of PID control systems to suit most applications. Fast heat-up times, almost undetectable overshoot and superb accuracy table make the IP Series a class-leading product. These incorporate a manual reset over-temperature cut-out, in line with IEC1010-2-010.