You searched for: Homogenisers

Supplier: DWK Life Sciences

Mortar in borosilicate glass, PTFE pestle with stainless steel rod. Handheld homogeniser with conical surface, which allows initial size reduction, followed by passage through the cylindrical section for the final homogenisation step. Grinding efficiency is improved and less time is required as compared to the Tenbroeck and Potter-Elvehjem designs. Recommeded for soft tissues such as brain.

Supplier: DWK Life Sciences

Borosilicate glass. Designed to retain a high percentage of cell nuclei and mitochondria in soft tissues. In operation, the pestle ball is encircled in liquid which avoids heat build up. Friction is reduced and there is reduced heat accumulation.

Supplier: SONICS MATERIALS

The Vibra-Cell™ is a technologically advanced, high-intensity ultrasonic processor for low volume applications*. It can safely process a wide variety of organic and inorganic materials in applications such as cell disruption, sample preparation, homogenisation, disaggregation and sonochemical reactions. The system can vary the power output and constantly monitor both power (Watts) and energy (Joules). The VCX 130 model has the additional features of 10 hour timer, independent on-off pulser and ability to program some set and run parameters.

Supplier: witeg Labortechnik

Tissue grinders are made of borosilicate glass, with PTFE pestle and stainless steel shaft.

Supplier: witeg Labortechnik

Dispersing Element, Homogeniser tool, HT1008, For: HG-15A, WiseTis®, Stator/rotor Ø: 8,0/6,1 mm, Length: 138 mm, Volume: 1 - 50 ml

Supplier: DWK Life Sciences

Disposable, borosilicate glass. Homogenise tissue micro samples without cross-contamination. Useful with radioactive samples. No washing is necessary; just dispose of the tissue grinder after use. The small grinding area yields a high percentage of sample recovery.

Supplier: DWK Life Sciences

A complete selection of Wheaton Micro tissue grinders conveniently packed in a lightweight protective carrying case.

Supplier: DWK Life Sciences

Borosilicate glass. Handheld homogeniser with conical surface, which allows initial size reduction, followed by passage through the cylindrical section for the final homogenisation step. Grinding efficiency is improved and less time is required as compared to the Tenbroeck and Potter-Elvehjem designs. Recommended for heart and lung tissues, as well for skin and plant tissues.

Supplier: DWK Life Sciences

Borosilicate glass. Designed for delicate manual operation. Similar to all-glass Potter-Elvehjem style, but micro size for extremely precise work.

Supplier: DWK Life Sciences

Borosilicate glass tube, PTFE pestle with stainless steel shaft.

Supplier: DWK Life Sciences

Plastic-coated borosilicate glass tube, PTFE pestle with stainless steel shaft.

Supplier: DWK Life Sciences

Mortar in borosilicate glass, PTFE pestle with stainless steel rod. Serrated PTFE pestle disperses homogenate into mortar cylinder more efficiently. Precisely constructed with completely interchangeable parts.

Supplier: DWK Life Sciences

Wheaton Dura-Grind® stainless steel Dounce tissue grinders provide a rugged alternative to glass Dounce tissue grinders. Smooth pestle action requires less effort than glass tissue grinders. Precision machined  No. 316 stainless steel to low tolerance of 0,0124 mm.

Supplier: DWK Life Sciences

Mortar in borosilicate glass, PTFE pestle with stainless steel rod. Precisely constructed with completely interchangeable parts. For use in preparation of tissue homogenates, etc. PTFE pestle for soft tissue such as brain or liver.

Supplier: SONICS MATERIALS

The Vibra-Cell™ is a technologically advanced, high-intensity ultrasonic processor for high and low volume applications*. It can safely process a wide variety of organic and inorganic materials in applications such as cell disruption, sample preparation, homogenisation, disaggregation and sonochemical reactions. The system can vary the power output and constantly monitor both power (Watts) and energy (Joules). The microprocessor control with real time display gives digital accuracy and reproducible control of set and run parameters.

Supplier: SONICS MATERIALS

The Vibra-Cell™ is a microprocessor controlled, high-intensity ultrasonic processor for high volume applications*. It can safely process a wide variety of organic and inorganic materials in applications such as cell disruption, sample preparation, homogenisation, disaggregation and sonochemical reactions. The system can vary the power output and constantly monitor both power (Watts) and energy (Joules). The microprocessor control with real time display gives digital accuracy and reproducible control of set and run parameters.

Supplier: BEHR

Homogenisers for pretreatment, sample splitting and homogenisation of heterogeneous water samples in accordance with German waste water quality control standards.

Supplier: Bel-Art Products, a Part of SP

Hand-held, cordless homogeniser features a simple push in / pull out pestle exchange and is ideal for thorough and faster processing of one to many samples.

Supplier: GLASS PRECISION ENGINEERING

These homogenisers combine a conical and a cylindrical surface giving two separate areas, one for initial grinding and a second for final homogenisation.

Supplier: GLASS PRECISION ENGINEERING

These mini homogenisers are made of high quality borosilicate glass and are ideal for micro tissue work. The mortar is made from clear precision glass and pestles have ground glass working length. Mini homogenisers are available with or without handles.

Supplier: BANDELIN-ELECTRONIC

A range of ultrasonic homogenisers to meet the requirements of laboratories for cell disruption, homogenisation, deagglomeration of nano particles, product of dispersions and fine emulsions or sonochemistry.

Supplier: BANDELIN-ELECTRONIC

An ultrasonic converter is used to convert the electrical energy supplied by the ultrasonic generator into mechanical vibrations.

Supplier: GLASS PRECISION ENGINEERING

Homogeniser, Tissue, Potter-Elvehjem, plastic coated, 55 ml, Total length: 175 mm

Supplier: GLASS PRECISION ENGINEERING

This all-glass Uni-Form range of round body tissue grinders is made from sterilisable heat-resisting glass. Bodies are available in clear precision glass or ground glass for more effective homogenisation of tougher tissues.

Supplier: DELTALAB

Clearance between Glass vessel and appropriately sized plunger is approximately 200 µm.

Supplier: GLASS PRECISION ENGINEERING

Tissue grinder, complete with a PTFE pestle, stainless steel handle and borosilicate glass mortar which is stoppered in PTFE to protect against splash back during the grinding process.

Supplier: GLASS PRECISION ENGINEERING

Pestle and mortar.

Supplier: GLASS PRECISION ENGINEERING

Griffiths tubes are produced from standard tubing and are perfect for general work where tight tolerances are unnecessary.

Supplier: GLASS PRECISION ENGINEERING

All-glass Dounce tissue grinders designed for fine particle size reductions without damage to cell nuclei. Supplied with two interchangeable pestles ground and polished to 'large' and 'small' clearances for use in the same tube. Large pestle used for sample preparation. Tight pestle for final homogenate.

Supplier: Roth Carl

These micro-tissue grinders with pestles made of borosilicate glass are for pulverising and homogenising minute quantities.