You searched for: Block Heaters

Supplier: BIOSAN

Block heater block, Interchangeable tube block, SC-24C, For: 24×2 ml microtubes

Supplier: Hach

Block heater/cooler, Hach®, LT 20, Thermostatic block heater, bench-top, 80 % relative humidity, non-condensing, Temperature range: 10...30 °C

Supplier: Hach

Digital block heaters which can hold one or two heating blocks, units allow cuvettes and reaction vessels to be digested at identical or different temperatures and time settings. Heating blocks enable cuvettes and reaction vessels to be digested at identical or different temperatures and time settings.

Supplier: Thermo Orion

Conduct environmental and wastewater monitoring with the Thermo Scientific™ Orion™ AQUAfast COD165 Thermoreactor. The COD165 thermoreactor is equipped with an automatic voltage selector for voltages between 90 and 260 V with a frequency of 50 or 60 Hz. Select from five preset work temperatures of 100, 120, 150, 160, 165 °C and four preset run times of 30, 60, 120 minutes or continuous time. Simply place 16 mm round sample tubes into the digestor wells, cover with the hinged safety shield, set the temperature and time and let samples digest.

Supplier: JENCONS SCIENTIFIC

Interchangeable blocks are made of high grade, non porous, anodised aluminium. Except the blocks used for plates and slides, all other blocks include positions for a block lifter and calibration thermometer.

Supplier: ASYNT

For controlled cooling of 25 to 1000 ml flasks without using jacketed reaction vessels. Units allow active temperature control from +150 to −30 °C (depending on circulator specification).

Supplier: HAEP LABOR

Block heater block, Block, BM 15, For: 24×1,5 ml tapered micro tubes, No. of holes: 24

Supplier: Hach

A digestion step often has to be carried out before key parameters can be determined. For these parameters, the LT 200 thermostat complements the LANGE cuvette test system. Two separately controllable heating blocks enable cuvettes and reaction vessels to be digested at identical or different temperatures and time settings. The LT 200 has a digital timer with an automatic switch-off and acoustic signal. Two transparent splash protection lids cover the thermostat while it is heating. The integrated over-temperature feature and the insulated external casing provide additional safety.

Supplier: ASYNT

The DrySyn® MAXI 2 L is a stand-alone 2000 ml version of the standard DrySyn MAXI Kit (which alternatively has a 3000 ml base and 2000 ml insert) which comes with heat resistant safety lifting handles.

Supplier: ASYNT

The DrySyn heating block range is the alternative to oil baths and heating mantles. The systems offer clean, safe synthesis for single or multiple reactions.

Supplier: LABCONCO

All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Supplier: Brand

Keep your samples and media cool for up to three hours with these Cooling Blocks from BRAND.

Supplier: Thermo Fisher Scientific

Reacti-Vap Evaporators (9 port)
These evaporators are precision machined gassing manifolds. They provide simple, efficient evaporation by allowing the simultaneous or separate delivery of non-reactive pressurised gas to samples. They easily connect to single block Reacti-Therm™ modules.

Supplier: Cole-Parmer

Quickly concentrate multiple samples in a block at once.