You searched for: Microplate Seals

Supplier: G-Biosciences

Acetate film with acrylic adhesive. This self-adhesive microplate sealing tape is suitable for sealing both 96-well and 384-well plates. The precut, pressure-senstive tape seals and reseals the surface of the plates during incubations to prevent evaporation and allow more vigorous mixing. The tape will reseal the plates 2 to 3 times.

Supplier: Thermo Fisher Scientific

EVA. For sealing PP and PS plates.

Supplier: Corning

Silicone septa mat for capillary sequencing of 96-well PCR plates. Mat forms a tight seal on wells but is easily accessible through septa in each well. Ideal for work on ABI multi-capillary sequencing instruments.

Supplier: Corning

Polyester based with uniformly and consistently applied acrylic adhesive to eliminate the edge effect in ELISA assays. Suitable for sealing tissue culture plates, for short-term storage and incubation, for transport and the containment of biohazardous solutions.

Supplier: Corning

Multiple formats for specific and precise fit on 96-well and 384-well plates and blocks.

Supplier: Simport Scientific

Adhesive sealing films reduce sample-to-sample or well-to-well contamination and/or spill over. SecureSeal™ has the differential advantage of perforated end tabs and a multiple split backing which allow for easier and more accurate positioning and more secure sealing. The polyester based film with acrylic adhesive is inert and thus compatible with almost all microplate procedures. SecureSeal™ is less than 0,001% moisture permeable under high humidity conditions and less than 0,01% oxygen permeable.

Supplier: Corning

Axygen AxyMat sealing mats can be used in a wide range of temperatures for PCR and storage applications.

Supplier: Thermo Fisher Scientific

Polyester tape with acrylic adhesive. Easy peel, easy seal general-purpose tape with a faster application time than normal tape in loose sheets.

Supplier: Corning

Axygen® ImpermaMat sealing mats minimize evaporation in a wide range of temperatures in PCR and storage applications. ImpermaMats are chemically resistant, reusable sealing mats, that provide a high degree of confidence.

Supplier: Whatman products (Cytiva)

Seals are used to control humidity and reduce evaporation of samples. They prevent spills and contamination.

Supplier: Thermo Fisher Scientific

Made from thermoplastic elastomer (TPE), except pre-slit silicone well cap. For sealing 96-well plates, particularly 1,3 ml and 2,0 ml U96 DeepWell™ plates. TPE well caps are resistant to DMSO, ethanol and methanol. Silicone well cap is solvent resistant, but is not suitable for 100% DMSO.

Supplier: Corning

For sealing 96 and 384-well PCR plates.

Supplier: Thermo Fisher Scientific

Polyester film with acrylic adhesive. Provides an effective seal for all MicroWell™ plates used in PCR and cell culture.

Supplier: Corning

Porous film seals PP and PS culture plates, 96 and 384-well plates, and other assay plates.

Supplier: Thermo Fisher Scientific

Vinyl film with pressure sensitive acrylate adhesive. For application to plate top or bottom, to protect light sensitive samples.

Supplier: iST Scientific Ltd

Transparent peelable film for storage. Suitable for aqueous sample storage.

Supplier: iST Scientific Ltd

Transparent perforated gas permeable film. Suitable for bacterial culture, eukaryotic cell culture.

Supplier: iST Scientific Ltd

Transparent DMSO resistant film with piercing X. Suitable for sample access and retrieval for 96 well plates for use with autosamplers and sequencers.

Supplier: Simport Scientific

Amplate™, Microplate seal, Mat (96 wells), Single sheet/mat/strip, Sealing mat for 96-well PCR plates, Santoprene™, Blue

Supplier: THERMO MATRIX TECHNOLOGIES

For long and short term storage of samples in microplates, and for sealing over pierced foil seals.

Supplier: RATIOLAB

Microplate seal, Cap strip, Single sheet/mat/strip, Closure, 8-Cap Strips, TPE, TPE, Non sterile

Supplier: MICROSOLV

Microplate seal, Mat (96 wells), Single sheet/mat/strip, Organic chemical resistant sealing mat for 350 µl U-2D™ plate system, non slit

Supplier: Simport Scientific

Amplitube™ domed cap strips ensure a perfect closure and a positive seal during thermal cycling and prevent evaporation.

Supplier: Brand

Aluminium sealing film can be pierced easily with a pipette tip for sample removal. Temperature range: −80 to +120 °C.

Supplier: iST Scientific Ltd

Pierceable foil seal with good solvent resistance. Suitable for PCR, compound storage, and sample shipping.

Supplier: Simport Scientific

Superflex™, Microplate seal, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, Closure for SuperFlex™ 96-well PCR plates, PP, Clear, Non sterile

Supplier: Brand

Microplate seal, Cap strip, Single sheet/mat/strip, Cap strips, 8-strip, domed top, PCR cap strips of 8, clear, domed, for skirted low profile PCR plates

Supplier: Simport Scientific

Designed to fit the Bioblock™ family, these mat covers are made of a specially formulated plastic ensuring great flexibility. They allow for maximum sample volume in each well. They are resistant to DMSO and biological buffers.

Supplier: Brand

Polyester flims suitable for PCR and Real-Time PCR measurements. Temperature range: –40 °C to +120 °C.

Supplier: iST Scientific Ltd

Pierceble and peelable, high grade foil for polystyrene plates with good solvent resistance including DMSO. Suitable for PCR low temperature compound storage, short term room temperature compound storage.