You searched for: Seals

Supplier: Cytiva (Formerly Pall Lab)

Microplate seal, Mat (96 wells), Single sheet/mat/strip, Cap mat for incubation, Cap mat for incubation

Supplier: AGILENT

Certified for use with the PlateLoc Thermal Microplate Sealer.

Supplier: VWR Collection

These soft, non permeable 63,5 µm thick aluminium foils, with strong medical grade adhesive, eliminate the need for heat sealing devices or mats during thermal cycling. Compared to other aluminium foils, these foils have less tendency to roll back on themselves when removing the backing paper, and fit well to the plate during application.

Supplier: THERMO MATRIX TECHNOLOGIES

SepraSeal® and DuraSeal® capping systems offer a pierceable, individual tube sealing solution. They are made from thermoplastic elastomer (TPE) with colorants and are DMSO resistant.

Supplier: VWR Collection

VWR® WebSeal™, Microplate seal, Mat (96 wells), Single sheet/mat/strip, Alcohol resistant, Sealmat (block cover), 96 round well shape, Ø 8 mm, alcohol resistant, Well top shape: Round, EVA, Clear, Non sterile

Supplier: THERMO MATRIX TECHNOLOGIES

Abgene™ SmartCap mat, made from advanced thermoplastic elastomer (TPE), rapidly seals 96 samples at one time in a high-density storage format, affording maximum space saving benefits. Suitable for use with Thermo Scientific™ storage tubes ranging from 0,3 ml to 1,4 ml, the Abgene™ SmartCap Mat maintains a consistent seal down to –80 °C.

Supplier: Lenz Laborglas GmbH & CO.KG

Silicone or Silicone PTFE-coated.

Supplier: VWR Collection

Aluminium foils, 75,7 µm thick, for use with 96 or 384 well plates. Fit inside the rim of raised rim plates. These foils have one partial width end tab. Available non sterile only.

Supplier: VWR Collection

These films are 240 µm thick black vinyl with adhesive for use with 96-well, 384-well and 1536-well black microplates. They fit within the edges of raised rim plates and may be applied to either the plate top or bottom. The light blocking and absorbing properties of these films make them ideal for reducing stray light and crosstalk in fluorescence applications and for protecting light-sensitive samples in storage.

Supplier: VWR Collection

A 139,7 µm thick hydrophobic porous film with medical grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. These rayon films minimise cross-contamination, spillage and evaporation. They allow uniform air and CO₂ exchange for all wells, unlike plate lids which favour exchange for wells near plate edges. Sterile product is packed in tamper evident bags of 25.

Supplier: Avantor Fluid Handling

Extend the life and accuracy of your expensive and fragile instruments.

Supplier: Thermo Fisher Scientific

Clear polyester film, aluminium foil. Recommended for use in PCR in conjunction with a thermal cycler that has a screw-down or clip-down lid.

Supplier: VWR Collection

These 77,5 µm thick polyester films provide secure sealing around every well, not just a cover, thus minimising evaporation, preventing spillage and well-to-well contamination, and eliminating 'edge effects' in sensitive ELISA assays. Polyester films can also be used with cell culture plates for short-term storage, incubation, and containment of biohazards.

Supplier: Thermo Fisher Scientific

VersiCap™ mats are designed to seal VersiPlate 96-well PCR strip tubes, but can be used will all Thermo Scientific strip tubes and 96-well plates.

Supplier: Trajan Scientific and Medical

The o-ring prevents gas leaks and maintains a uniform flow path through the inlet, where even small leaks can cause sample loss - affecting accuracy and reproducibility of results.

Supplier: VWR Collection

With a polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy piercing sealing film allows direct sample recovery with single- or multi-channel pipettes and robotic probes.

Supplier: VWR Collection

Polyester 2×8 strip films are identical to polyester films in material and adhesive, but designed for sealing only one or two 8-well rows at a time on either strip-well plates or standard plates whenever rows must be selectively protected or accessed. Sterile product is packed in tamper-evident bags of 50/bag.

Supplier: Bohlender

FEP. Sealing for flat flange with groove.

Supplier: HEATHROW

Parafilm® M is a semi-transparent, flexible, thermoplastic film with two-way stretch. This odourless and colourless film provides a tight, moisture-proof seal.

Supplier: Avantor

J.T.Baker®, Microplate seal, Mat (48 wells), Single sheet/mat/strip, Capmat for J.T.Baker plate square well 48, Well top shape: Square, EVA, Transparent, Pierceable, Non sterile

Supplier: IDEX RHEODYNE

Rotor seals are the common wear part in all the Rheodyne® valves and many can be purchased separately or as part of a RheBuild® kit.

Supplier: Avantor

J.T.Baker®, Microplate seal, Mat (96 wells), Single sheet/mat/strip, Capmat for J.T.Baker® Plate Medio, Well top shape: Round, EVA, Transparent, Non-pierceable, Non sterile

Supplier: THERMO MATRIX TECHNOLOGIES

Individual storage plate caps are designed for sealing storage plates and cluster tubes.

Supplier: THERMO MATRIX TECHNOLOGIES

Thermo-Seal, Microplate seal for ALPS 3000, Heat sealing film/foil/tape (96/384 wells), Roll, Film, Thermo-seal, for PP microplates (very strong seal), Pierceable

Supplier: Thermo Fisher Scientific

Mechanical Seals, Graphite liner sealing ring for Agilent SSL liners

Supplier: VACUUBRAND

These centring and sealing rings for small stainless steel flange KF connections. With aluminium sealing ring.

Supplier: HEATHROW

Universal, semi-transparent, highly elastic film designed for airtight and moisture-proof sealing and many other manual applications. The film can be stretched up to 200% and forms a completely tight seal even with irregular shapes and areas.

Supplier: VWR Collection

VWR®, Microplate seal, Cap strip, Single sheet/mat/strip, Cap strip for PCR plates and tube strips, flat, Non sterile

Supplier: Avantor

Suitable to use with J.T.Baker® Plate Round Well 43001-0010, 43001-0016 or 43001-0116.

Supplier: Thermo Fisher Scientific

These heat-shrink bands can be used to ensure the integrity of bottle contents. Simply apply the recommended application torque for Thermo Scientific Nalgene® closures and slide the heat-shrink band over the closure and bottle neck. Heat the band to shrink and secure contents with a tamper-resistant seal.