Supplier: WATERS

The combination of hydrophobic and silanophilic mechanisms make Resolve® C18 packings highly retentive for polar and non-polar compounds. Resolve® C18 packages are commonly used for agricultural, industrial, chemical and pharmaceutical applications where very retentive surfaces are needed to adsorb polar compounds.

Supplier: WATERS

Oasis® HLB cartridges contain the Oasis® HLB sorbent, which is a universal polymeric reversed phase sorbent that was developed for the extraction of a wide range of acidic, basic, and neutral compounds from various matrices using a simple, generic protocol.

Supplier: DIONEX

These columns are used to separate the inorganic anions from the deverse matrices.

Supplier: DIONEX

AS4A-SC columns are used to separate the inorganic anions in environmental water and are recommended for the fast analysis of inorganic anions in deverse matrices while using the carbonate eluents.

Supplier: YMC

YMC octyl columns are prepared from exhaustive bonding of a monomeric octylsilane to totally spherical and porous silica gels. The functionalised silica is then treated with a endcapping process. This produces a moderate 10% carbon loading on the standard 120 Å pore material.

Supplier: WATERS

SunFire™ columns provide symmetrical peak shapes for improved resolution. With new bonding and endcapping technologies, they offer great efficiency for acid, neutral, and basic compounds at low and intermediate pH ranges. They are compatible with mass spectrometry applications, providing sharp peaks, high sensitivity, large peak capacities and very low bleed.

Supplier: YMC

The ProFamily range is manufactured from ultra high purity silica (99,999%), which is then subjected to a special bonding process. Silica with an extremely low metal content is used for the phases of the ProFamily to suppress polar interactions, as metal impurities influence silanol groups to become more acidic.

Supplier: WATERS

Symmetry® C18 columns feature monofunctionally bonded C18 ligands on a high purity base-deactivated silica.

Supplier: DIONEX

CS5A is a high-resolution, ion-exchange column designed for determination of transition and lanthanide metals in a variety of sample matrices.

Supplier: DIONEX

This IonPac® AS10 is a high-capacity hydroxide-selective, anion-exchange column designed for isocratic and gradient separation of inorganic anions and organic acids.

Supplier: WATERS

XSelect™ CSH C18 is a general purpose column that provides alternative selectivity compared to other C18 sorbents. Charged Surface Hybrid (CSH) technology helps to overcome column related problems such as peak shape asymmetry and poor loading for basic compounds, column bleed and slow mobile-phase re-equilibration.

Supplier: DIONEX

Dionex™ InGuard™ HRP cartridges are ideal for the removal of organic matrix material over a wide range of hydrophobicity including fats from whole milk.

Supplier: DIONEX

This high-capacity, high-efficiency column provides excellent resolution of inorganic anions in diverse sample matrices. This is the hydroxide-selective column of choice for fastest compliance monitoring of inorganic anions in drinking water and wastewater samples in accordance with U.S. EPA Methods 300.0 (A) and 300.1.

Supplier: YMC

YMC-Triart PFP is a non-endcapped stationary phase with unique selectivity.

Supplier: DIONEX

The anion exchange column provides fast analysis of common inorganic anions and oxyhalides, such as chlorite and bromate, in environmental waters. This column is also useful for trace chloride and sulfate in high-carbonate matrices. The compliance monitoring of common anions in drinking water as specified in U.S. EPA method 300.0 (A) and (B).

Supplier: WATERS

These cartridges deliver the option of minimum sample preparation. Consists of moulded, high purity PP syringe-barrel bodies with two PE frits to contain the packing material.

Supplier: YMC

ODS-AQ is a C18 reversed phase silica based HPLC packing material specifically designed for use in 100% aqueous eluents.

Supplier: WATERS

XBridge BEH C18 sorbent can be used over an entire range of mobile phase pH (1 to 12). The trifunctionally bonded C18 ligand provides with a universal column for most HPLC separations and gives you the widest usable pH range, superior low pH stability, and ultra-low column bleed. The XBridge BEH C8 sorbent is less retentive compared to the XBridge BEH C18 sorbent.

Supplier: DIONEX

Cation exchange columns are designed for the fast, isocratic separation of lithium, sodium, ammonium, pottasium, magnesium, and calcium using sulphuric acid eluents.

Supplier: WATERS

These columns are based on 4 µm silica-based particle technology. The phenyl ligand is used to achieve unique compound selectivity with reversed-phase applications.

Supplier: WATERS

Atlantis® dC18 columns are universal, silica-based, reversed phase C18 columns that are used for polar compound retention. The Atlantis® dC18 columns feature di-functionally bonded C18 ligands that have been optimised for use with highly aqueous mobile phases, including 100% water.

Supplier: WATERS

The particals and chemistries of the ACQUITY UPLC columns are used to separate and with maximum speed, sensitivity and resolution without compromise, it produce the ideal combination of ultra performance efficiencies wide complementary selectivities.

Supplier: YMC

ODS-AL is a non-endcapped high carbon load monomeric C18 phase. It is used only in those situations where residual sianol activity is beneficial to the separation.

Supplier: WATERS

The cartridges are compatible with the Spherisorb® cartridge system. They may also be used in a stand-alone holder or in integral extended cartridge end-fitting.

Supplier: WATERS

Spherisorb® is a porous, spherical material with a range of narrow particle and pore size distribution resulting in very efficient chromatographic separations. These columns have industry standard, fixed end-fittings and are available in three particle sizes. For guard columns, use corresponding Spherisorb® guard cartridge with stand-alone holder listed under “Fittings and Accessories'”

Supplier: WATERS

These cartridges can used with liquid and gas samples and have the unique capability of reverse flow direction, a useful feature for trace enrichment application.

Supplier: WATERS

SymmetryShield™ columns feature Waters' patented embedded polar group technology that shields the silica's residual silanols from highly basic analytes at improves overall peak shape. Additionally, by placing the embedded polar group close to the silica surface, the activity of the surface silanols is further reduced. This imparts selectivity and retention that is different compared to the Symmetry® C18 ligand.

Supplier: WATERS

µBondapak® C18 columns are general purpose, silica-based, reversed phase C18 columns that are based on 10 µm particle technology.

Supplier: WATERS

Column type: HPLC column, µBondapak®, Phenyl, Ø int.: 3,90 mm, Length: 300 mm, Pore size: 125 Å, Particle size: 10 µm

Supplier: WATERS

Symmetry® C8 columns feature monofunctionally bonded C8 ligands on a high purity base-deactivated silica.