You searched for: Chromatography Columns

Supplier: BEHR

Glass column with GL45 on both ends, GS 950, according to LUA bulletin no. 20, Ø int.: 60,00 mm, Length: 320 mm, Capacity: 950 ml

Supplier: Restek

Rt-alumina BOND/Na₂SO₄ columns (fused silica PLOT) are used for Na₂SO₄ deactivation.

Supplier: Restek

General purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners (e.g., Aroclor mixes), essential oils, semivolatiles.

Supplier: UPCHURCH SCIENTIFIC

This narrow-bore short column (2,0×20 mm) creates only a slight pressure increase with virtually no detectable theoretical plate loss when used with a 3 mm int.Ø or larger column.

Supplier: Restek

Rt-Alumina BOND/KCl (fused silica PLOT) are used for KCl deactivation.

Supplier: Restek

Raptor™ ARC 18 columns are ideal for high-throughput LC-MS/MS applications with minimal sample preparation.

Supplier: Restek

These MXT-2887 columns stationary phase, column dimensions, and film thicknesses have been optimised to exceed the resolution and skewing factor requirements. Siltek-treated stainless steel tubing.

Supplier: Restek

When extreme pressure shocks and gas flow changes are anticipated there is a possibility for particles to dislodge. In those cases, using particle traps is recommended.

Supplier: Restek

Ultra Aqueous C18 is a rugged, reversed phase column with a well balanced retention profile that boasts high reproducibility and compatibility with many mobile phase, even in 100% aqueous conditions.

Supplier: Restek

Ultra amino columns are made of high-purity, spherical shaped type-B silica that minimises activity and creates high-density bonding. These columns are designed for selective and reliable HPLC applications. Aminopropylsilane provides reproducible retention and efficiency for normal-phase or HILIC analysis of simple sugars.

Supplier: Restek

Rxi®-5Sil MS stationary phase incorporates phenyl groups in the polymer backbone. This improves thermal stability, reduces bleed, and makes the phase less prone to oxidation. These columns are ideal for GC-MS applications requiring high sensitivity, including use in ion trap systems.

Supplier: Restek

These cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. Hydrophilic (polar) adsorbents used to extract hydrophilic analytes from nonpolar matrices, such as organic solvents (e.g., polar contaminants from sample extracts).

Supplier: Restek

Non bonded stationary phase packed columns.

Supplier: Restek

These columns are made up of passivated stainless steel.

Supplier: Restek

These fused silica columns have midpolarity Crossbond® phase manufactured for column to column reproducibility suited for validated methods.

Supplier: Restek

General purpose Rt®-TCEP columns is ideal for aromatics and oxygenates in gasoline.

Supplier: Restek

MXT®-65 columns are general-purpose columns for phenols, triglycerides, and fatty acids.

Supplier: Restek

This Rtx®-Dioxin column has greater thermal stability than 5% diphenyl phases or high-cyano confirmation columns.

Supplier: Restek

Bio-Safe columns are biocompatible and precision-machined from virgin PEEK.

Supplier: Restek

Convenient 2 m length is ideal for use as a secondary column in GCxGC analyses.

Supplier: Restek

Extend analytical column lifetime by preventing degradation from harsh 'steam-cleaning' water injections.

Supplier: Restek

Rtx®-1614 columns (fused silica) are optimised for PBDE analysis by EPA Method 1614.

Supplier: Restek

Allure® Organic Acids columns provide enhanced retention and selectivity for polar organic acids, allowing the separation to be performed on a single 30 cm column.

Supplier: Restek

Mid-to high-polarity phase, Crossbond® diphenyl dimethyl polysiloxane, general-purpose columns for phenols, fatty acids, triglycerides.

Supplier: Restek

These capillary columns are isomer specificity for 2,3,7,8-TCDD and 2,3,7,8-TCDF achieved with one GC column. Unique selectivity for toxic dioxin and furan congeners which allows to use as a confirmation GC column.

Supplier: Restek

Force Biphenyl LC HPLC Columns are ideal for bioanalytical testing applications like drug and metabolite analyses.

Supplier: Restek

MXT-Alumina BOND/MAPD PLOT columns are made specifically for the analysis of petrochemicals and downstream products such as ethylene, propylene, butylenes and butadiene.

Supplier: Restek

Analyse active samples accurately; ideal for chlorinated pesticide analysis (reduces endrin breakdown to less than 1%)

Supplier: Restek

Ultra C1 columns made of high-purity, type-B silica are designed for selective and reliable HPLC applications.

Supplier: Restek

Pinnacle® DB PFP Propyl columns provides great retention and selectivity of charged bases, electronegative compounds, and amine-containing compounds.