Supplier: Restek

Complete data pack available for audit compliance.

Supplier: Restek

This 610 PAH calibration mix B idela for LC-UV detection.

Supplier: Restek

This extraction solvent stock solution contains: n-decane (C10), n-tetracontane (C40).

Supplier: Restek

This contains: n-butyl acetate; ethyl acetate; isopropyl acetate; n-propyl acetate; vinyl acetate.

Supplier: Restek

607 Nitrosamines calibration mix contains N-nitrosodimethylamine, N-nitroso-di-n-propylamine, N-nitrosodiphenylamine.

Supplier: Restek

This extraction solvent stock solution contains: n-decane (C10) (20 µl/l), n-tetracontane (C40) (20 mg/l).

Supplier: Restek

Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfy your ISO requirements.

Supplier: Restek

The mix consists of diesel fuel #2 composite, mineral oil.

Supplier: Restek

Ozone Precursor Mixture/PAMS has 57 components.

Supplier: Restek

These solutions are prepared from a single-source (one-refinery) product.

Supplier: Restek

Confirms unleaded gasoline TPH, BTEX and aromatics in single analysis.

Supplier: Restek

These solutions are prepared from a single-source (one-refinery) product.

Supplier: Restek

The mix consists of diesel fuel #2 composite, unleaded gasoline composite.

Supplier: Restek

A mineral oil-based transformer oil (Exxon® Univolt® N-61), which has been tested to ensure it is PCB-free.

Supplier: Restek

Revised GPC calibration mix is a qualitative mixture and it is useful for determining GPC dump/collect times. The compounds are dissolved in methylene chloride at various concentrations.

Supplier: Restek

Consists of nine components, those are azinphos methyl, chlorpyrifos, diazinon, dimethoate, malathion, parathion, phorate, temephos and terbufos .

Supplier: Restek

Components in this mix (0,5 μl/ml or 0,05% volume/volume each) are at 10X the concentration of the final test solution specified in ASTM 1618 and ASTM 1387.

Supplier: Restek

The weathered materials indicate the percent weight loss from the original material. Prepared from a single source (one refinery) product.

Supplier: Restek

It consists of benzene, 1,2-dibromoethane, 1,2-dichloroethane, ethylbenzene, isopropylbenzene (cumene), 2-methylnaphthalene, methyl tert-butyl-ether (MTBE), naphthalene, toluene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene and p-xylene.

Supplier: Restek

This TNRCC 1006 retention time marker mix contains: (C6) n-Hexane, (C7) n-Heptane, (C8) n-Octane, (C10) n-Decane, (C12) n-Dodecane, (C16) n-Hexadecane, (C21) n-Heneicosane, (C28) n-Octacosane, (C35) n-Pentatriacontane.

Supplier: Restek

Contains eight components, those are 2-chlorobiphenyl, 2,3-dichlorobiphenyl, 2,4,5-trichlorobiphenyl, 2,2',4,4'-tetrachlorobiphenyl, 2,2',3',4,6-pentachlorobiphenyl, 2,2',4,4',5,6'-hexachlorobiphenyl, 2,2',3,3',4,4',6-heptachlorobiphenyl and 2,2',3,3',4,5',6,6'-octachlorobiphenyl.

Supplier: Restek

Contains 22 components, those are aldrin, α-bhc, β-bhc, δ-bhc, γ-bhc, cis-chlordane, trans-chlordane, decachlorobiphenyl, dieldrin, 4,4'-ddd, 4,4'-dde, 4,4'-ddt, endosulfan i, endosulfan ii, endosulfan sulfate, endrin, endrin aldehyde, endrin ketone, heptachlor, heptachlor epoxide, methoxychlor and 2,4,5,6-tetrachloro-m-xylene.

Supplier: Restek

Subsurface degradation of fuel oil spills can be estimated by examining the ratios of C17/pristane and C18/phytane. To assist in identifying these four compounds from the complex fuel oil analysis, Restek offer a product that contains these compounds for retention time determination.

Supplier: Restek

The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane, acenaphthene, acenaphthylene, anthracene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(ghi)perylene, chrysene, dibenz(a,h)anthracene, fluoranthene, fluorene, indeno(1,2,3-cd)pyrene, naphthalene, phenanthrene, pyrene.

Supplier: Restek

D2887 calibration mix contains compound, conc.; (C6) n-hexane (110-54-3), 6% w/w; (C7) n-heptane (142-82-5), 6% w/w; (C8) n-octane (111-65-9), 8% w/w; (C9) n-nonane (111-84-2), 8% w/w; (C10) n-decane (124-18-5), 12% w/w; (C11) n-undecane (1120-21-4), 12% w/w; (C12) n-dodecane (112-40-3), 12% w/w; (C14) n-tetradecane (629-59-4), 12% w/w; (C16) n-hexadecane (544-76-3), 10% w/w; (C18) n-octadecane (593-45-3), 5% w/w; (C20) n-eicosane (112-95-8), 2% w/w; (c24) n-tetracosane (646-31-1), 2% w/w; (c28) n-octacosane (630-02-4), 1% w/w; (C32) n-dotriacontane (544-85-4), 1% w/w; (C36) n-hexatriacontane (630-06-8), 1% w/w; (C40) n-tetracontane (4181-95-7), 1% w/w; (C44) n-tetratetracontane (7098-22-8), 1% w/w.

Supplier: Restek

Contains: Aramite (140-57-8); Bis(2-chloroethyl)ether (111-44-4); Bis(2-chloroethoxy)methane (111-91-1); 4-Bromophenyl phenyl ether (101-55-3); Chlorobenzilate (510-15-6); 2-Chloronaphthalene (91-58-7); 4-Chlorophenyl phenyl ether (7005-72-3); 1,2-Dichlorobenzene (95-50-1); 1,3-Dichlorobenzene (541-73-1); 1,4-Dichlorobenzene (106-46-7); 1,3-Dinitrobenzene (99-65-0); Hexachlorobenzene (118-74-1); Hexachlorobutadiene (87-68-3); Hexachlorocyclopentadiene (77-47-4); Hexachloroethane (67-72-1); Hexachloropropene (1888-71-7); Isodrin (465-73-6); Kepone (143-50-0); 2,2'-Oxybis(1-chloropropane) (108-60-1); Pentachlorobenzene (608-93-5); Pentachloronitrobenzene (quintozene) (82-68-8); 1,2,4,5-Tetrachlorobenzene (95-94-3); 1,2,4-Trichlorobenzene (120-82-1)

Supplier: Restek

This contains perfluorotributylamine (PFTBA).

Supplier: Restek

Calibration check mix, 8270 acid, 2000 µg/ml each in methylene chloride, : N/A, 1 ml/ampoule

Supplier: Restek

8040 Surrogate mix contains 2-fluorophenol, 2,4,6-tribromophenol.

Supplier: Restek

This spike mix contains two components: 1-Chlorooctadecane and o-Terphenyl.