Syringes for Chromatography

Supplier: HAMILTON BONADUZ

The syringe guide comes with a syringe installed from the factory. This eliminates the assembly step which can lead to damage of the smaller volume syringes. This is especially critical for 7000 series syringes which have extremely small plunger wires.

Supplier: HAMILTON BONADUZ

These syringes are the Gastight® version of the original 700 series syringes and are ideal for dispensing volumes from 1 µl up to 500 µl.

Supplier: HAMILTON BONADUZ

The Digital Syringe™ is a calibrated device composed of a serialised syringe and a serialised digital electronic holder.

Supplier: HAMILTON BONADUZ

Gastight® syringes for the PSD/2 syringe pump are available with a standard PTFE-tipped plunger and a long life ultra-high molecular weight polyethylene (UHMWPE) plunger tip. The stroke length of a PSD/2 syringe is 60 mm.

Supplier: HAMILTON BONADUZ

Syringes are designed and tested to meet critical autosampler performance needs.

Supplier: HAMILTON BONADUZ

Gas tight syringes made of borosilicate glass or PTFE with Luer tip termination.

Supplier: HAMILTON BONADUZ

These syringes allow the collection, storage, transport and analysis of liquid or gaseous samples without the danger of evaporative loss or environmental contamination.

Supplier: Thermo Fisher Scientific

GC Autosampler syringes for use with Agilent GC instruments.

Supplier: HAMILTON BONADUZ

Syringe, chromatography, HPLC, Syringes, 1750 C, 1/4-28 thread, Model 1750 C, Volume: 500 µl, Pk: 1

Supplier: HAMILTON BONADUZ

The 700 series syringe is the original hand-fitted Hamilton syringe. This series of syringes is ideal for dispensing volumes from 0,5 to 500 µl. The stainless steel plunger is manufactured to fit the glass barrel with a tolerance smaller than 100 millionths of an inch, resulting in unsurpassed syringe life. Each syringe is manufactured to achieve the highest level of accuracy and precision possible.

Supplier: HAMILTON BONADUZ

Syringes for the PSD/4 syringe pump are available with a standard PTFE tipped plunger and with a long life UHMWPE (Ultra High Molecular Weight Poly Ethylene) plunger tip. The stroke length of a PSD/4 syringe is 30 mm.

Supplier: HAMILTON BONADUZ

S-Line syringes are the cost-effective choice for CTC PAL autosampler applications. The Gastight® syringes have a precision-machined PTFE plunger tip which creates a leak-free seal that is an ideal choice for HPLC sample injections. Microliter syringes incorporate a hand-fitted stainless steel plunger with a finely bored syringe barrel.

Supplier: HAMILTON BONADUZ

These GC syringes are suitable for Bruker Varian Chrompack autosamplers.

Supplier: Thermo Fisher Scientific

Syringe, chromatography, GC, Fixed needle, gas tight, Volume: 10 µl, Type of tip: Bevel, Gauge: 26, Length: 50 mm, Pk: 1

Supplier: HAMILTON BONADUZ

The 1000 series is a mid volume Gastight® syringe. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision machined PTFE plunger tip which creates a leak-free seal. With the tight fit, the tip essentially wipes the interior of the syringe barrel free of sample. This feature is particularly useful with heterogeneous samples as it reduces the chance that a deposit will occur and cause the plunger to freeze.

Supplier: HAMILTON BONADUZ

Universal injection syringes for GC. Similar to the 700 series but with a reinforced, protected plunger.