You searched for: Swabs for Sampling

Supplier: VWR Collection

Critical swabs designed for cleaning disc drives, optics, PC board assemblies and other sensitive components.

Supplier: VWR Chemicals

Surface sampling sponges in two forms: Dry sponge sterile sampling bag with write-on strip, containing a dry, biocide-free cellulose sponge, or wet sponge sterile sampling bag, with a foil-sealed, pre-moistened cellulose sponge, and 10 ml of sterile neutralising buffer.

Supplier: VWR Collection

Swabs feature 100 ppi open or closed cell polyurethane foam, with 100% virgin polypropylene handle. Some have a blue, glass fibre, reinforced polypropylene shaft for extra rigidity, especially for use in critical environments.

Supplier: VWR Collection

Disposable 'foam over cotton' tip swab features 100% polyurethane foam with 100 ppi, and a wooden shaft.

Supplier: 3M Food Safety

3M™ Swab-sampler with 4 ml neutralising buffer is a convenient and quick collection device for environmental sampling and testing over small surface areas.

Supplier: STERILIN

This innovative nylon fibre technology and unbeatable sample collection and release make the swabs PCR compatible for molecular analysis.

Supplier: 3M Food Safety

3M™ Swab-Sampler with 10 ml D/E neutralising Broth is a convenient and quick collection device for environmental sampling and testing over small surface areas.

Supplier: 3M Food Safety

3M™ Swab-Sampler with 10 ml Buffered Peptone Water Broth is a convenient and quick collection device for environmental sampling and testing over small surface areas.

Supplier: Texwipe

Coventry™ microtips are designed for precision applications needing pinpoint accuracy. The tapered porous polyvinylidene fluoride tip is effective as a stylus or pick for areas with tight tolerances.

Supplier: Copan

DNA collection for human identification. The active drying system absorbs water molecules, preventing microbial growth and guaranteeing DNA stability for 12+ months at RT and –80 °C.

Supplier: 3M Food Safety

3M™ Swab-sampler with 10 ml neutralising buffer is a convenient and quick collection device for environmental sampling and testing over small surface areas.

Supplier: Copan

CLASSIQSwabs™ are traditional and sterile ready-for-use devices intended for the collection of clinical samples.  The association of Copan CLASSIQSwabs™ with the wide range of Copan Transport Media enables an efficient sample collection and preservation compatible with many downstream assays.
These soft fiber swabs are available in tubes or peel pouches, Regular or Minitip shapes, and various materials such as cotton, rayon, and polyester. All these materials are inert and non-toxic to microorganisms and patients. CLASSIQSwabs™ are traditional and sterile ready-for-use devices intended for the collection of clinical samples.

Supplier: Copan

Our Swab Rinse Kits line includes comprehensive tailor-made collection and devices for the detection of environmental microbial contamination in a broad range of environments, such as food production, pharmaceutical sites, and hospital wards. Inspectors and Quality Assurance personnel can use SRK® products for routine surface monitoring within manufacturing areas, hospital surfaces, and equipment.

Supplier: 3M Food Safety

The 3M™ Enviro Swab is a pre-moistened swab, ready to use for collecting environmental samples on all types of food contact surfaces in the food industry.

Supplier: 3M Food Safety

Real-time adenosine tri-phosphate (ATP) surface hygiene test which gives an objective indication of cleanliness in seconds.

Supplier: 3M Food Safety

The 3M™ Quick Swab is a ready-to-use environmental swab system consisting of a five inch, rayon-tipped swab containing Letheen neutralising buffer to facilitate recovery of bacteria.

Supplier: HYSERVE

Easy to carry early warning test for contamination of surfaces with coliform bacteria. Based on a certified method, the Coliform Swab provides a simple method for the qualitative detection of these bacteria - with a clear colour change from purple to yellow in the presence of coliform bacteria.

Supplier: 3M Food Safety

The 3M™ Dry-Sponge is a biocide-free cellulose sponge that comes with a printed sample bag.

Supplier: 3M Food Safety

3M™ Dry-sponge with gloves is a biocide-free cellulose sponge that includes two polyethylene gloves and a sample bag.

Supplier: HYSERVE

Listeria Swab is designed to minimise the risk of contamination of work areas or finished products by Listeria spp. in particular L.monocytogenes. Each self-contained peel pouch consists one green-capped plastic shaft with calcium alginate tip and one labeled and sealed tube containing selective culture medium with indicator. Listeria Swab is sterilised by irradiation.

Supplier: 3M Food Safety

3M™ Sponge-Stick in sample bag with 10 ml D/E neutralising broth uses simplified packaging to minimise handling and preparation, and reduces waste.

Supplier: 3M Food Safety

Water hygiene test to measure free ATP in a sample.

Supplier: DELTALAB

For safe sampling. Item 115-8250 is longer than conventional swabs and was designed to reach hard-to-reach areas. For example, suitable for use in gynaecology when used with a speculum to remove endocervical cells. Also ideal for veterinary medicine.

Supplier: 3M Food Safety

3M™ Hydrated-Sponge uses simplified packaging to minimise handling and preparation, and reduces waste.

Supplier: MEDICAL WIRE EQUIPMENT

Preimmersed swabs for use with a self standing tube and a high visibility blue cap and swab, which is easy to find and retrive if accidentally dropped.

Supplier: MEDICAL WIRE EQUIPMENT

These dry swabs are ideal for collecting specimens or samples for analysis or for transferring materials during a diagnostic procedure.

Supplier: MEDICAL WIRE EQUIPMENT

Swabs with 45 mm breakpoint, dry or pre-moistened with sterile diluent.

Supplier: BAILLY

Plain swabs suitable for a wide range of applications.

Supplier: MEDICAL WIRE EQUIPMENT

Flocked swabs are ideal for PCR, molecular assays, forensic applications, food applications, and direct antigen testing. The bud is formed by a layer of tiny multi-filament polyester fibres of varying lengths, increasing the effective surface area of the swab.

Supplier: MERCK LIFE SCIENCE

The ideal swab for microbial monitoring of isolator and clean room surfaces – Requires opening only once for sampling. The ICR Swab is a unique system for environmental monitoring of dry surfaces, such as filling needles, equipment recesses, uneven surfaces and tubing in clean rooms and isolators. It is a qualitative presence/absence test for microbiological contamination. This ‘all-in-one’ heipha ICR Swab System requires opening only once for sampling. All further steps, such as addition of broth, incubation and detection of turbidity, are performed within the closed system, thus minimizing the risk of potential contaminations due to handling.