You searched for: Chromatography Spare Parts

Supplier: Agilent

These alignment interfaces are an integral part of the Agilent diode-array detection system.

Supplier: Agilent

These ICP-OES series are compatible with a range of accessories and supplies designed to extend the capabilities of the instruments.

Supplier: Agilent

Nitrogen Chemiluminescence Detector (NCD) is a nitrogen-specific detector that produces a linear and equimolar response to nitrogen compounds based on a chemiluminescent reaction of NO with ozone.

Supplier: VARIAN

Graphite tubes are quality tested to ensure each batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance and lifetime.

Supplier: Agilent

A vacuum degasser is recommended for maximum sensitivity in the low UV wavelength range; high injection precision; high retention time reproducibility; and flow rates below 0,5 ml/min.

Supplier: VARIAN

The Merlin Microseal is available in standard and high pressure kits.

Supplier: Agilent

Replacement RRLC nebuliser for G4218A ELS detector

Supplier: Agilent

The ISIS 3 dramatically increases the productivity of both the Agilent 7800 ICP-MS and the Agilent 7900 ICP-MS while also allowing high matrix samples to be run for extended periods of time.

Supplier: Agilent

These coils are equivalent to PerkinElmer ICP-OES coils for complete confidence.

Supplier: Agilent

Intuvo Flow Chips are modular, microfluidic components that create connections between the inlet, column, and detector(s) without the need for ferrules, and can be easily swapped in minutes.

Supplier: Agilent

The 5100 ICP-OES features a plug and play torch, and a simple and effective torch-loader mechanism. This automatically aligns the torch and connects the gases to ensure fast start-up and reproducible performance.

Supplier: Agilent

These cone supplies are equivalent to the PerkinElmer ICP-MS versions for complete confidence.

Supplier: Agilent

These skimmer and sample cones are equivalent to those from PerkinElmer ICP-MS for complete confidence.

Supplier: Agilent

These sample and skimmer cones are equivalent to those from PerkinElmer ICP-MS for complete confidence.

Supplier: Agilent

These graphite platforms and tubes for PerkinElmer graphite furnace AA systems are quality tested to ensure every batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance, and lifetime.

Supplier: Agilent

This kit consist the enzymes and cleanup cartridges for the enzymatic deglycosylation process of N-glycan.

Supplier: VARIAN

Solid phase microextraction (SPME) is a technique for extracting analytes from solid, liquid or gaseous samples by adsorbing them onto the SPME fiber and then desorbing them into an inlet, either on a gas chromatograph (GC) or an HPLC system. SPME is amenable to automation using an autosampler or it can be performed manually as well.

Supplier: Agilent

These nebulisers for PerkinElmer AA systems provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: VARIAN

Mark 7 Spray Chambers for flame atomisation System. Easy-to-use twist and lock assembly allows for easy cleaning and routine maintenance.

Supplier: Agilent

The HSDC is comprised of a fused silica cell body and removable capillaries. The light path through the cell is made from black fused silica which significantly minimizes stray light and defines the aperture for the diode-array spectrometer.

Supplier: Agilent

These starter kits contain the most widely used capillary tubing, Swagelok connectors, and fittings in a variety of sizes.

Supplier: Agilent

The InfinityLab flex bench family includes the InfinityLab flex bench system and the InfinityLab benchtop system.

Supplier: Agilent

High quality off-axis design ion lenses separate ions from photons and residual neutral material resulting in lower background noise in 7500 ICP-MS systems.

Supplier: Agilent

CrossLab piston seal, reversed-phase, For: Thermo UltiMate 3000 RS and SD pump series

Supplier: Agilent

The Quick-Connect torch module for PerkinElmer ICP-OES includes the torch, mounting block, 2 mm alumina injector, Scott spray chamber, and Cross-Flow nebuliser.

Supplier: Agilent

These performance maintenance kits for Waters HPLC systems contain all the normal wear parts, tools for disassembly/reassembly, and instructions necessary to keep your systems operating at peak performance.

Supplier: Agilent

Inert kit for ICP-MS enables analysis of high-purity and HF-containing samples using a PFA-based sample intro system with inert Pt or sapphire-injector torch.

Supplier: Agilent

These torch injectors for PerkinElmer ICP-OES are available in a wide range of types. Choose from alumina or quartz in a range of sizes and acid resistance.

Supplier: Agilent

The 4100/4200 Microwave plasma-atomic emission spectrometer runs entirely on air, which means your lab can eliminate flammable and expensive gases. It's safer and more cost efficient than other spectrometers. The 4100/4200 MP-AES enables superior detection and can perform unattended multi-element analyses.

Supplier: Agilent

These graphite platforms and tubes for PerkinElmer graphite furnace AA systems are quality tested to ensure every batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance, and lifetime.