You searched for: Multi-Element Standards

Supplier: VWR Chemicals

33 elements 100 mg/L: Al, Ag, As, B, Ba, Be, Bi, Ca, Cd, Cs, Co, Cr, Cu, Fe, In, K, Li, Mg, Mn, Mo, Na, Ni, Nb, Pb, Rb, Sb, Se, Sr, Ti, Tl, V, U, Zn.

Supplier: VWR Chemicals

Multi-Element Standard, NexION Setup Solution (8 Elements), VWR®, 1 ug/l each of Be, Ce, Fe, in, Li, Mg, Pb, U, Matrix: 1% HNO₃, Application: ICP-MS standards

Supplier: Merck

Multi-Element Standard, ICP multi-element standard solution VI 30 elements in dilute nitric acid, Certipur®, Application: ICP standards

Supplier: Merck

Multi-Element Standard, Multi-element standard solution 3 for ICP, TraceCERT®, Supelco®, Matrix: 5% HNO₃, Application: ICP standards

Supplier: Merck

Multi-Element Standard, ICP multi-element standard solution IV 23 elements, Certipur®, Matrix: Nitric acid dil., Application: ICP standards

Supplier: VWR Chemicals

Multi-Element Standard, ICP Calibration Standard - Quality Control (XVI) (21 Elements), VWR®, 100 mg/l each of As, Be, Ca, Cd, Co, Cr, Cu, Fe, Li, Mg, Mn, Mo, Ni, Pb, Sb, Se, Sr, Ti, Tl, V, Zn, Matrix: 2% HNO₃, Application: Calibration, ICP standards

Supplier: Merck

Multi-Element Standard, Multi Cation Standard 2 for IC, TraceCERT®, Supelco®, Matrix: Nitric acid dil., Application: Ion chromatography standards

Supplier: Merck

Multi-Element Standard, Transition metal mix 2 for ICP, 100 mg/L, TraceCERT®, Supelco®, Matrix: 2% HNO₃/1% HF, Application: AAS standards, ICP standards

Supplier: VWR Chemicals

12 elements at 10 mg/L: Hf, Ge, Mo, Nb, Sb, Si, Sn, Ta, Te, Ti, W, Zr

Supplier: Merck

This standard solution is intended for use as a certified reference material for ICP/AAS.

Supplier: VWR Chemicals

Multi-Element Standard, Alternate Metals II (4 components), VWR®, Ca 500 mg/l, Na 500 mg/l, K 100 mg/l, Mg 100 mg/l, Matrix: 2% HNO₃, Application: ICP standards

Supplier: VWR Chemicals

28 elements 1 mg/L: Al, Ag, As, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Sb, Se, Sr, Ti, Tl, V, Zn.

Supplier: VWR Chemicals

16 components: Ag 10 mg/l, Al 100 mg/l, As 100 mg/l, Ba 50 mg/l, Be 5 mg/l, Cd 5 mg/l, Co 50 mg/l, Cr 20 mg/l, Cu 50 mg/l, Fe 20 mg/l, Mn 20 mg/l, Ni 50 mg/l, Pb 100 mg/l, Sb 100 mg/l, Se 100 mg/l, Tl 100 mg/l in 5% HNO₃

Supplier: Merck

Multi-Element Standard, Titanium and Tin-WP, Supelco®, Application: Environmental standards, Waste water

Supplier: Merck

Multi-element standard solution 1 has been used in the analysis of pollutants like trace elements in water using total reflection x-ray fluorescence (TXRF) method and inductively coupled plasma mass spectrometry(ICP-MS).

Supplier: VWR Chemicals

8 Components in 2% HNO₃.

Supplier: VWR Chemicals

13 Components in 2% HNO₃.

Supplier: Merck

27 components:

Supplier: Merck

Multi-Element Standard, Trace Metals AA Sample 3, Supelco®, Application: Environmental standards, Waste water, AAS standards

Supplier: VWR Chemicals

6 components: Lithium (Li+) 50 mg/l, Sodium (Na+) 200 mg/l, Ammonium (NH4+) 250 mg/l, Potassium (K+) 500 mg/l, Calcium (Ca2+) 500 mg/l, Magnesium (Mg2+) 250 mg/l in H₂O

Supplier: Merck

Multi-Element Standard, Transition metal mix 1 for ICP, 100 mg/L, TraceCERT®, Supelco®, Matrix: 2% HNO₃, Application: ICP standards

Supplier: VWR Chemicals

28 elements 100 mg/L: Al, Ag, As, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Sb, Se, Sr, Ti, Tl, V, Zn.

Supplier: Merck

Multi-Element Standard, Periodic table mix 3 for ICP, 10 mg/L, TraceCERT®, Supelco®, Matrix: 5% HNO₃, Application: AAS standards, ICP standards

Supplier: Merck

Multi-Element Standard, Trace Metals-ICP Sample 2, Supelco®, Application: Environmental standards, Waste water

Supplier: Merck

Multi-Element Standard, Trace Metals AA Sample 2, Supelco®, Application: Environmental standards, Waste water, AAS standards

Supplier: Merck

Multi-Element Standard, Rare earth element mix for ICP, 50 mg/L, TraceCERT®, Supelco®, Matrix: 2% HNO₃, Application: AAS standards, ICP standards

Supplier: VWR Chemicals

26 components: 100 ug/ml each of Ag, Al, As, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Ni, Pb, Sb, Se, Sn, Sr, Ti, Tl, V, Zn in 5% HNO₃/tr. HF/tr. C₄H₆O₆

Supplier: Merck

Multi-Element Standard, Trace Metals 1-WP, Supelco®, Matrix: 5% HNO₃, Application: ICP standards, AAS standards, Environmental standards

Supplier: Merck

Safety note: These solutions are generally in acid solution.

Supplier: Merck

Multi-Element Standard, Transition metal mix 3 for ICP, 100 mg/L, TraceCERT®, Supelco®, Matrix: 10% HCl, Application: AAS standards, ICP standards