You searched for: Temperature Probes

Supplier: VWR Collection

Remote temperature probes for circulator use with a chiller. Allows points of control to be switched from inside a chiller to a remote location. Compensates for heat loss through tubing between the circulator and the control point. Platinum RTD sensor with stainless steel sheath. Rubber coupling with 25,4 mm Ø, connects sheath to flexible cable. Probe cable ends in a DB9 female plug.

Supplier: WTW

Temperature Probe, TFK CR

Supplier: EBRO

Use the humidity/temperature probes (with an appropriate measuring instrument) for the reliable measurement of relative humidity and temperature.

Supplier: Testo

Flexible and high-precision for temperature measurements: The digital temperature probe with flexible probe shaft (together with the compatible measuring instrument) is ideal for carrying out measurements in locations that are difficult to access and in liquids.

Supplier: EBRO

Use the humidity/temperature probes (with an appropriate measuring instrument) for the reliable measurement of relative humidity and temperature.

Supplier: Testo

Use the humidity/temperature probes (with an appropriate measuring instrument) for the reliable measurement of relative humidity and temperature. Humidity sensor is durable and traceable to international humidity standards, such as ILAC, PTB and NIST. Thus, even after years of use you can still count on measurement results that are reliable and correct.

Supplier: VWR Collection

Temperature probe, VWR®

Supplier: Testo

Low temperature probes allow a precise control of your cooling processes. They can be used in deep freezers, liquid nitrogen tanks, cooling chambers and boxes. These digital probes can be calibrated individually without deinstalling the measurement system.

Supplier: VWR Collection

External PT100 probes is for monitoring the temperature of an external application.

Supplier: WTW

Temperature probe

Supplier: Liebherr

Temperature probe

Supplier: Testo

Temperature probe

Supplier: Bohlender

Used for temperature measurement in aggressive liquids and cable provides flexible connection from measuring device to medium.

Supplier: Testo

Ideal for measurements in laboratories, in industry and also in food quality control. The air probe with Pt100 temperature sensor, which features long-term stability.

Supplier: SenseAnywhere

This smart probe featuring a digital SenseAnywhere Bus interface has been especially designed to be used in ultra-low environments for monitoring cryogenic applications down to -200 °C. The class A wire wound ceramic Pt100 sensor ensures accurate measurements over a wide temperature range. Due to the digital interface this probe with its own serial number and integrated electonics can be calibrated. Calibrated SAB sensors can be easily hot swapped offering a big advantage and cost savings for recalibration of sensors.

Supplier: SenseAnywhere

This smart probe featuring a digital SenseAnywhere Bus interface has been especially designed for measuring extreme temperatures in liquid substances. Thanks to its hermetic seal made of PFA, better known as Teflon®, the Hermetically Sealed Pt100 Probe has a high level of chemical resistance. The probe is thanks to its PFA insulation waterproof and easy to clean. It can withstand aggressive substances, allowing it to take measurements in virtually all liquid fluids while being constantly submerged. The PT100 element has a Class A accuracy; measurements are provided at a very high accuracy level.

Supplier: Testo

Temperature probe, −200...+300 °C

Supplier: Testo

Temperature probe, −50...+70 °C, 300 mm

Supplier: DESCO

Hooked stainless steel probe, 140 mm.

Supplier: VWR Collection

External PT100 probe is used for with chillers and coolers, 6000 series chiller, non-refrigerated coolers, 4100 liquid-to-liquid coolers.

Supplier: Ludwig Schneider GmbH & CO. KG

Temperature probe, Class 2, −50...+200 °C, Ø×L: 3×150 mm

Supplier: Testo

Temperature probe, −60…+250 °C

Supplier: NABERTHERM

This thermocouple is suitable for muffle furnaces.

Supplier: Industrial Physics

These temperature probes can be connected to instruments suited for changeable probes (type ‘K’) using a plug connection.

Supplier: VWR Collection

Temperature probe, VWR®, Liquids, air, gas & semi-solids, −50…+700 °C, Ø×L: 3,30×190,5 mm

Supplier: Industrial Physics

Temperature probe, 0…1000 °C

Supplier: Testo

The thin humidity/temperature probe is suitable for measuring temperature and relative humidity in storerooms and work rooms. The exceptionally small diameter of 4 mm also makes it possible to measure in small holes and narrow passageways.

Supplier: IKA

Temperature probe

Supplier: COWIE

Platinum resistance temperature probes made of stainless steel, encapsulated in PTFE, with push-on ferrule.

Supplier: VWR Collection

Optimise performance of thermometer.