You searched for: Fittings and Connectors

Supplier: VICI JOUR RESEARCH

Plugs can be used to close off an unused port in a valve or manifold. Size ¹/₄ - 28".

Supplier: UPCHURCH SCIENTIFIC

PEEK or stainless steel.

Supplier: Restek

Internal uniona are made of 300 series stainless steel with end of tubing that seats squarely at bottoms of fitting details. Suitable for 1,6 mm OD tubing.

Supplier: Restek

Internal tees are made of stainless steel are used to connect three lines. Suitable for 1,6 mm OD tubing.

Supplier: UPCHURCH SCIENTIFIC

PEEK polymer adapters connect peristaltic tubing to standard rigid or semi-rigid tubing.

Supplier: SEMADENI

Hose connector, PE-HD, D = 9 mm

Supplier: SEMADENI

Connectors, Y- shaped, made of PP, natural color.

Supplier: PIEPER FILTER

Mini connectors for tubing, made of PP, translucent, T-shape.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PTFE. Female to male 10-32 to 1/4-28 adapters.

Supplier: SEMADENI

PP, gray.

Supplier: PIEPER FILTER

PP, translucent.

Supplier: UPCHURCH SCIENTIFIC

Metric flangeless fittings offer the same benefits as flangeless fittings with the additional feature of being used for metric tubing and ports. They are specifically designed to connect 1,8, 2,0, 2,5, 3,0, or 4,0 mm Ext.Ø tubing to flat-bottom ports when paired with the appropriate M6, 1/4-28, or 5/16-24 flangeless nuts.

Supplier: Restek

Graphite Ferrules for Vu2 union connectors.

Supplier: Restek

These MXT® union connectors kits are suitable for connecting metal and/or fused silica GC columns.

Supplier: Restek

A critical orifice in the EZ No-Vent® connector minimizes the amount of oxygen allowed into the MS source, eliminating the need for purge gas required. This enables to skip the lengthy vent and pump-down cycle.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-116, plug for micro fittings, PEEK, Black

Supplier: Restek

This Swagelok® fitting kits includes the most common assortment of ¹/₈" and ¹/₄" brass fittings.

Supplier: Restek

GRAPHPACK® technology provides a complete system that quickly and reliably makes a leak-tight, low-dead-volume connection. The central component is a metal-jacketed graphite ferrule - the ideal seal for GC applications.

Supplier: VICI JOUR RESEARCH

These fittings are designed for 360 µm tubing (metal, fused silica, PEEK or fused silica).

Supplier: Restek

CGA-specified nuts and nipples with internal frit, 6,35mm NPT nickel-plated brass.

Supplier: Restek

These capillary nuts are made from brass or stainless steel.

Supplier: VICI JOUR RESEARCH

These PP adapters are used for colour coding different solvent lines. They turn ¹/₄" hex-head nuts into fingertight fittings.

Supplier: UPCHURCH SCIENTIFIC

These fittings eliminate loosening due to tubing twist.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® MicroTight®, F-124H, fitting, micro headless knurl, PEEK blue, 6-32 coned port, for 360 μm OD tubing, 5000 psi, PEEK

Supplier: VICI JOUR RESEARCH

These stainless steel 316 tees and crosses are ideal for joining solvent lines.

Supplier: VICI JOUR RESEARCH

Polyacetal flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: Restek

The tee is designed with a glass spiral to promote sample vaporisation and to provide even sample distribution to the two columns. The glass spiral also traps sample residue and minimises the need for guard columns. A Press-Tight® taper in each outlet leg facilitates a perfect dead volume free connection to each analytical column and allows visual confirmation of the column connection.

Supplier: VICI JOUR RESEARCH

VICI Stainless Steel Unions are made for joining two pieces of ¹/₁₆" Ø tubing, or an ¹/₈" tube. They are precision machined with a focus on the concentricity of the bore as well as on the finish of the surfaces to give an absolute leak-free connection. These Unions have internal threads, which we recommend for most applications. Internal threads make stronger connections and internal fitting details provide the lowest dead volume for high performance instrumentation.

Supplier: PIEPER FILTER

PP, translucent.

Supplier: Restek

Universal 10-32 PEEK connectors for easy installation of all ¹/₁₆" tubing, it includes stainless steel, up to 345 bar.