You searched for: Pipette Tips

Supplier: Greiner Bio-One

Flexibility is critical in terms of modern liquid handling solutions. This is why the Sapphire tips are manufactured in eight different sizes in a volume range from 10 to 1250 µl, including an extended length 10 µl tip for the recovery of small sample volumes. All our tips are made of medical grade polypropylene and are available as standard, low-retention, filter, or low-retention filter tips.

Supplier: KARTELL

These tips are made of high quality, 100% pure, virgin PP. Made in the highest quality moulds, these tips can be used whenever the work demands a higher standard.

Supplier: VISTALAB TECHNOLOGIES

These tips are made from 100% pure virgin PP. They contain a hydrophobic filter which acts as a barrier to aqueous liquids and aerosols, protecting the pipette and sample from trace amounts of carryover.

Supplier: DISTRIBUTOR

Use these extremely long, fine and flexible tips for filling of microcapillaries, racked. Eppendorf ™ Microloader™ pipette tips are ideal for micro-injection and where additional reach is needed.

Supplier: KARTELL

These filter tips made from PP are designed for use in molecular biology, cell cultures, bacteriology, virology, immunology and radioimmunology. Hydrophobic PE filters act as a barrier against aerosol contamination, preventing cross-contamination of samples and micropipettes.

Supplier: USA SCIENTIFIC PLASTICS

Gel loading tips are specially designed for gel electrophoresis. They have a very narrow delivery orifice to facilitate dispensing of the sample into the bottom of the wells of 0,6 mm gels.

Supplier: Greiner Bio-One

These gel loading tips are characterised by an elongated end. They are ideal for numerous molecular biological applications, especially for filling the slots of sequencing, PCR and protein electrophoresis gels.

Supplier: Socorex Isba

These syringe tips are designed for use with the repetitive pipette Stepper™ 411. Three sizes cover the full volume range from 10 to 5000 µl.

Supplier: LABCON

Labcon Eclipse™ FlexTop™ Low force pipet tips are designed to fit onto most popular pipettors and eject with forces shown to help reduce the risk of strain injury. By using these low force tips you don't have to invest in special pipettors to gain all the advantages of low force pipetting.

Supplier: KARTELL

These tips are made of high quality, 100% pure, virgin PP. Made in the highest quality moulds, these tips can be used whenever the work demands a higher standard.

Supplier: Associates of Cape Cod

Disposable combitips for use with eppendorf multi-step pipettes.

Supplier: RAININ

These thin-wall tips are designed to fit RAININ and Pipetman pipettes with conical shafts, Eppendorf and Labsystems pipettes. Some tips feature a hydrophobic filter which forms a barrier against aerosols and liquids eliminating potential sample and pipette cross contamination.

Supplier: RAININ

These tips are designed for Pos-D™ positive displacement pipettes. A disposable piston, which moves within a plastic capillary, makes direct contact with the liquid. The positive wiping action of the piston against the capillary wall assures complete dispensing without droplets. These tips eliminate cross-contamination from aerosols, samples or pipette.

Supplier: SARSTEDT

These high quality tips are suitable for the most common pipettes.

Supplier: RAININ

These aerosol-resistant tips are designed for use with RAININ Pipet-Lite, Pipet-Plus and EDP3-Plus pipettes with LTS LiteTouch Tip Ejection System. 1200 µl tips are specifically designed for use with RAININ E12-1200 and E8-1200 multi-channel pipettes. The unique design prevents drop formation and eliminates the need for touch-off between dispenses.

Supplier: RAININ

These thin-wall tips are designed for use with RAININ Pipet-Lite, Pipet-Plus and EDP3-Plus pipettes with LTS LiteTouch Tip Ejection System. 1200 µl tips are specifically designed for use with RAININ E12-1200 and E8-1200 multi-channel pipettes. The unique design prevents drop formation and eliminates the need for touch-off between dispenses. The tips are available in different packaging options.

Supplier: SARSTEDT

These PP filter tips have a hydrophobic PE filter that prevents the aerosol, which is formed when pipetting, from contaminating the pipette.

Supplier: RAININ

These thin-wall tips are designed for use with RAININ Pipet-Lite, Pipet-Plus and EDP3-Plus pipettes with LTS LiteTouch Tip Ejection System. 1200 µl tips are specifically designed for use with RAININ E12-1200 and E8-1200 multi-channel pipettes. The unique design prevents drop formation and eliminates the need for touch-off between dispenses. The tips are available in different packaging options.

Supplier: SARSTEDT

These superior quality filter tips are manufactured in a controlled production environment that complies with the strictest purity standards. The filter insert serves as an aerosol barrier protecting the pipette against contaminations, enabling safe pipetting of DN or RNA, toxic or infectious samples.

Supplier: RAININ

Racked tips for Liquidator™ 96 bench-top pipettor with LTS™.

Supplier: RAININ

These syringe tips are designed for use with AutoRep E and AutoRep S type manual and electronic pipettes. 25 and 50 ml syringe tips include an adapter.

Supplier: Roth Carl

These tips are suitable for loading SDS page protein gels, horizontal agarose and DNA sequencing gels.

Supplier: RAININ

These filter tips are designed for use with the Liquidator™ 96 manual pipetting system.

Supplier: HAMILTON ROBOTICS

Hamilton CO-RE tips were designed for MICROLAB pipetting workstations in order to solve the problem of sealing and alignment plagued by press-fit tip attachment techniques. Each CO-RE disposable tip has a circular groove inside the attachment orifice. An o-ring on the pipetting channel is expanded to fit this groove precisely providing an air-tight seal and straight alignment between tip and pipetting channel.