55 Results for: "Sterilizátory"

Supplier: LABCONCO

Evaporator, centrifugal, Dry ice vacuum trap Ø×H: 200×248 mm

Supplier: TUTTNAUER

Autoclave, 21CFR 11 compliance for steriliser

Supplier: MEMMERT

Bottom drip tray, For: SF 260

Supplier: Bohlender

Culture bottles, made of borosilicate glass, suitable for both low and high speed (maximum 1000 rpm) stirrers for gentle mixing of cell cultures.

Supplier: MEMMERT

Bottom drip tray, For: SF 450

Supplier: MEMMERT

Door with lock (safety lock), for SN75

Supplier: MEMMERT

Door with lock (safety lock), for SN110

Supplier: MEMMERT

Door with lock (safety lock), for SN160

Supplier: MEMMERT

Door with lock (safety lock), for SN110plus

Supplier: MEMMERT

Bottom drip tray, For: SF 30 Plus

Supplier: MEMMERT

Bottom drip tray, For: SF 75 Plus

Supplier: MEMMERT

This steriliser complies with all relevant standards and regulations for medical products and guarantees reliable programme sequences, irrespective of the load and chamber volume. Especially due to the SetpointWAIT function the validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the programme is only continued when the setpoint temperature has been reached. Precisely maintaining the sterilisation time and thus completely killing off even highly resistant microorganisms is therefore guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable Pt100 temperature sensors. In this case, sterilisation only begins when the setpoint temperature has been reached at all measurement points – that is, in the load. For the special application of depyrogenisation, the hot-air steriliser is absolutely ideal. The SF models are equipped with single display.

Supplier: MEMMERT

Bottom drip tray, For: SF 55

Supplier: MEMMERT

Bottom drip tray, For: SF 75

Supplier: MEMMERT

Bottom drip tray, For: SF 30

Supplier: BINDER GMBH

Robust space-saving oven/steriliser with hydraulic mechanical thermostat and temperature setting via analogue dial indicator thermometer.

Supplier: MEMMERT

Perforated shelf, stainless steel, For: SF 160

Supplier: MEMMERT

Bottom drip tray, For: SF 750 Plus

Supplier: MEMMERT

Perforated shelf, stainless steel, For: SF 110

Supplier: MEMMERT

Door with lock (safety lock), for SN55plus, For: Steriliser SN55plus

Supplier: MEMMERT

Door with lock (safety lock), for SN30plus, For: Steriliser SN30plus

Supplier: MEMMERT

Door with lock (safety lock), for SN75plus, For: Steriliser SN75plus

Supplier: MEMMERT

Perforated shelf, stainless steel, For: SF 160 Plus

Supplier: MEMMERT

These sterilisers comply with all relevant standards and regulations for medical products, and guarantee reliable program sequences, irrespective of the load and chamber volume. With the SetpointWAIT function validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the program only continues when the set point temperature has been reached. Precisely maintaining the sterilisation time and thus completely killing off even highly resistant microorganisms is, therefore, guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable PT100 temperature sensors. In this case, sterilisation only begins when the set point temperature has been reached at all measurement points – that is, in the load. For special applications such as depyrogenisation, this hot air steriliser is absolutely ideal. SFplus models are equipped with TwinDISPLAY.

Supplier: MEMMERT

Bottom drip tray, For: SF 750

Supplier: MEMMERT

Door with lock (safety lock), for SN260plus, For: Steriliser SN260plus

Supplier: MEMMERT

Grids, stainless steel, for SN55, For: Steriliser SN55

Supplier: MEMMERT

Door with lock (safety lock), for SN160plus, For: Steriliser SN160plus

Supplier: MEMMERT

Bottom drip tray, For: SF 450 Plus

Supplier: MEMMERT

Bottom drip tray, For: SF 55 Plus