Liquid Process Filters

Supplier: HICHROM

The Last Drop™ eluent filter utilises a flat element, which sits parallel to the bottom of the reservoir, allowing the filter to draw all but the last 2% of the eluent without drawing air into the system. The filter consists of a 316 stainless steel or PTFE filter element in an inert housing.

Supplier: HICHROM

These filters are made from 100% PEEK.

Supplier: HICHROM

These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Supplier: ROBU GLASFILTER

ROBU® degassing filter with integrated VitraPOR® filter ensures efficient solvent degassing with inert gases, combined with reliable filtration. Ideal for chromatography and analytical applications, it offers high chemical and thermal resistance.

Supplier: Bohlender

These PTFE suction filters consist of a receiver with a female thread and an easily exchangeable frit. They are ideal prefilters in front of pump systems for protecting gaskets, pistons or column packings against premature wearing due to contaminations.

Supplier: ROBU GLASFILTER

ROBU® VitraPOR® solvent filter for HPLC provides precise and reliable filtration of solvents, ensuring optimal performance in high-performance liquid chromatography systems.

Supplier: Bohlender

Filter candle made of porous PE.

Supplier: Bohlender

Suction Filter with PTFE membrane.

Supplier: IDEX RHEODYNE

Inlet filters are used to extract particles from the sample between the injector and the column.

Supplier: VIVA

The arium® CellPlus is a sterile packed, point-of-use ultrafilter for efficient removal of endotoxins, RNase, DNase, microorganisms and particles. Retrograde contamination is prevented by the protective bell design made up of polycarbonate. It offers high safety for critical cell culture applications.

Supplier: MICROSOLV

Biocompatible, last drop, PEEK and polypropylene mobile phase filters. PTFE filter element and will provide very high filter capacity and throughput while using a maximum amount of solvent. The unique design allows for this flat filter to vacuum up to the last drop of liquid in the reservoir bottle.

Supplier: AGILENT HEWLETT PACKARD

It prevents the formation of spurious peaks within the detector due to solvent outgassing at the low-pressure end of the chromatograph.

Supplier: VARIAN

This mobile phase inlet filter operates up to 500 °C and is compatible with halogenated solvents.

Supplier: Merck

Inlet filter assembly, PE filter, Pore size: 10 μm

Supplier: VICI JOUR RESEARCH

These filters made from stainless steel 316L protect HPLC systems from small particles in the mobile phase.

Supplier: VICI JOUR RESEARCH

With flat filter element which allows the maximum amount of mobile phase to be drawn from the reservoir without introducing air into the system.