You searched for: Vials

Supplier: DELTALAB

Single use vials made of high density polyethylene to minimise solvent losses.

Supplier: METROHM

Sample vials made of quartz for Combustion IC.

Supplier: Merck

Chromatography vial, Headspace screw neck, 20,00 ml, Glass, Clear, Ø×H: 22,5×75,5 mm, Round bottom, Non sterile, Cap included: No, Cap size: 18 mm

Supplier: DESAGA

General use vial, Snap neck, 1,50 ml, PS, Ø×H: 14×24 mm, Conical bottom, self-standing, Non sterile, Cap included: Yes

Supplier: VITRUM

Clear and amber neutral Type I/Type 1 tubular glass vials and lyophilisation (Lyo) vials.

Supplier: AGILENT HEWLETT PACKARD

Vial insert, 0,25 ml, PP, Non sterile, Cap included: No

Supplier: LA PHA PACK

Screw neck vials in clear or amber glass, hydrolytic class 1, for sample storage. A broad range of closed top screw caps are available with different types of septa.

Supplier: Merck

Chromatography vial, Headspace crimp neck, 10,00 ml, Glass, Clear, Ø×H: 23×46 mm, Flat bottom, Non sterile, Cap included: No

Supplier: Merck

These certified vial kits are designed, engineered, and manufactured for optimal performance in HPLC, GCMS, and LCMS. The vial, cap, and septa are batch tested to confirm that the quality of each component will be the same, time after time.

Supplier: METROHM

General use vial, 6,00 ml, Glass, Clear, Ø×H: 22×38 mm, Non sterile, Cap included: No

Supplier: Merck

These vials are made of PP with graduations and 9 mm fitting.

Supplier: AGILENT HEWLETT PACKARD

General use vial, Screw neck, external thread, 40,00 ml, Glass, Clear, Ø×H: 28×95 mm, Flat bottom, Non sterile, Cap included: Yes, Cap size: 24-414, Cap material: PP, Septum: PTFE/silicone

Supplier: Merck

Autosampler vials are used for chromatography analysis. Several configuration are provided to maintain the sample integrity.

Supplier: Merck

These short thread autosampler vials with 9 mm thread are designed to fit almost all autosamplers.

Supplier: AGILENT HEWLETT PACKARD

Certified MS analysed vial kits end the need to pre-test or to rerun samples due to unexpected peaks. All MS analysed vials kits include a certificate of analysis that contains true, lot-specific and fully traceable LC/MS and GC/MS signal traces as well as critical physical dimensions.

Supplier: LA PHA PACK

Standard glass or plastic vials for GC and HPLC, micro-inserts, closures and kits. Can be used universally on almost all autosamplers, preferred type of vial for Waters and Agilent.

Supplier: Merck

Autosampler vials are made of Type1 borosilicate glass.

Supplier: Merck

Pre-assembled sample vials with solid-top phenolic screw caps with PTFE or aluminium liner.

Supplier: NEOLAB

Due to their technical geometry, the neochrom® threaded vials with ND9 can be used on all popular autosamplers.

Supplier: AGILENT HEWLETT PACKARD

CrossLab snap top vials and caps provides a secure seal without crimping.

Supplier: AGILENT HEWLETT PACKARD

Chromatography vial, Crimp neck, 2,00 ml, Glass, Clear, Ø×H: 12×32 mm, Flat bottom, Non sterile, Cap included: No

Supplier: AGILENT HEWLETT PACKARD

Chromatography vial, Headspace crimp neck, 20,00 ml, Glass, Amber, Ø×H: 23×75 mm, Flat bottom, Non sterile, Cap included: No

Supplier: AGILENT HEWLETT PACKARD

These vials are certified for full warranted compatibility with Agilent autosamplers. The screw caps and precision fit septa give a secure seal with microvolume inserts.

Supplier: AGILENT HEWLETT PACKARD

Vials with 2 ml wide opening are constructed from type 33 and type 51 COE borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching.

Supplier: Merck

Capillary bottles with PTFE-lined screw-caps are designed for the storage of volatile samples and reference standards.

Supplier: DELTALAB

Tubes and caps made of autoclavable PP. Designed for the storage of biological material at temperatures as low as –196 °C (only in the gas state if stored in liquid nitrogen).

Supplier: MURRAY S

These clear scintillation vials with screw cap are made from low potassium glass.

Supplier: THERMO NATIONAL SCIENTIFIC

Shell vials are an economical choice for many routine HPLC applications. Vial selections include clear glass, amber glass or polypropylene. 8×35 mm shell vials are designed specifically for Alcott Positive Displacement autosamplers.

Supplier: DWK LIFE SCIENCES

These vials made of PP uses either aluminum crimp seals or plastic snap cap closures, which eliminate the need for crimping and decapping tools, and provide a larger target area.

Supplier: THERMO NATIONAL SCIENTIFIC

These crimp/snap top low volume sample vials can be used with 6, 7 and 8 mm autosampler trays. They are made of borosilicate glass, type 1, class A.