You searched for: Valves

Supplier: BD Medical

DEHP or natural rubber latex are not part of the material formulation.

Supplier: Cytiva

Range of manual and automated valves to meet a variety of performance requirements. They are designed for biocompatibility and years of reliable service, each may be inserted into the flow path without causing unnecessary mixing or sample dilution.

Supplier: BURKLE

Translucent PP retaining valves with embossed directional arrow or printed in black. With tapered ends. Various uses.

Supplier: Bel-Art Products, a Part of SP

PP valve, translucent with neoprene valve disk. Stops reverse flow of liquid when pressure is interrupted.

Supplier: Socorex Isba

Replacement kits for the valve assembly are supplied in a dedicated bag with each Socorex® self-refilling syringe.

Supplier: BURKLE

Valve made of PP and POM, seal made of EPDM, springs made of stainless steel 1.4401.

Supplier: AGILENT HEWLETT PACKARD

Replacement valve WE series, 10-port, 400 psi, 225 °C

Supplier: witeg Labortechnik

Needle valve for burettes, lateral with PTFE plug, 0 - 2,5 mm bore

Supplier: VARIAN

Valves made from stainless steel are two-position with six-port. It is manually operated with three-way switching.

Supplier: witeg Labortechnik

Spare needle valve, PTFE, red for high vacuum stopcocks WITAFLO, 3 mm hole

Supplier: Merck

The Rheodyne Model 7725 injector allows you to inject 1 μl to 5 ml samples with accuracy and precision.

Supplier: VICI JOUR RESEARCH

These micro valves for LC and GC has a unique design of the fitting detail which allows a leak-free seal with no potential for rotor damage from overtightening.

Supplier: SEMADENI

½” universal valve made from PP, resistant to acids, alkalis and solvents.

Supplier: SEMADENI

These non return valves are made from PP.

Supplier: SEMADENI

Three way ball valve with PP body and PTFE tips with total length of 65 mm.

Supplier: UPCHURCH SCIENTIFIC

Designed to accurately split and control the low flow stream of a single incoming supply.

Supplier: UPCHURCH SCIENTIFIC

These standard inline check valves are made from gold plated stainless steel.

Supplier: UPCHURCH SCIENTIFIC

The Quick-Stop Luer check valve assembly is specifically designed to provide inline Luer connect/disconnect convenience while avoiding spills. It is made from biocompatible PEEK with gold-plated stainless steel spring.

Supplier: UPCHURCH SCIENTIFIC

Inline cartridge check valves are designed to limit flow in one direction and deliver a low cracking pressure. Ideal placement for these valves would be on the effluent side of the column to prevent post-column derivatisation agents from flowing back and poisoning the column if the HPLC mobile phase pump were to shut down.

Supplier: QVF LABORTECHNIK

Air valve anti-return, cone size 14/23 NS, with sidearm, Borosilicate glass 3.3

Supplier: UPCHURCH SCIENTIFIC

The 6-port medium pressure injection valves feature easy, external sample loop customisation. Simply clean-cut a piece of tubing that represents the volume of sample you wish to inject, taking into account the port-to-port volume of the valve.

Supplier: LENZ LABORGLAS

DURAN®, borosilicate glass, clear. Prevent pressure loss or backflow. Simple design, cannot be dismantled.

Supplier: UPCHURCH SCIENTIFIC

Pressure relief valves are ideal for preventing system over-pressurisation. These products protect system components by diverting fluid flow automatically when inline pressure exceeds the set limit.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, V-101T 3-way flow-switching valve, bulkhead version, 1/16" OD tubing, 1,0 mm thru-hole, 9,7 µl swept volume

Supplier: UPCHURCH SCIENTIFIC

For fine control of fluid flow rates, these valves can reduce outgoing flow. These needle valves are perfect for use with peristaltic pump fluid transfer applications, mass spectrometry and fraction collection. They can also be used to regulate gas flow in helium sparging lines and as a flow-dependent variable back pressure regulator.

Supplier: UPCHURCH SCIENTIFIC

Stop a flow stream quickly with these shut-off valves. The bodies are manufactured from either PEEK or ETFE. Both versions feature a PCTFE rotor, making them highly resistant to chemicals. The blue colorant used in some valve configurations has proven not to leach out with common HPLC solvents.

Supplier: DWK LIFE SCIENCES

Designed for use in vacuum lines and fluid handling systems.

Supplier: UPCHURCH SCIENTIFIC

These biocompatible PEEK and perfluoroelastomer inline check valves are designed for applications where low flow path volume is critical, such as delivery to lab-on-a-chip, single-cell analysis and micro- or nano-LC post-column derivatisation.

Supplier: VICI JOUR RESEARCH

This regulator installs on the detector drain line and prevents bubble formation in the flow cell during outgassing. It has an adjustable back pressure from 0 to 20 bar (15 to 300 psi) without disconnecting from the system. Other sizes available.

Supplier: UPCHURCH SCIENTIFIC

These ultra-low volume back pressure regulators (BPRs) are developed to minimise swept volume, which is especially important for multi-detector applications.