You searched for: Slides

Supplier: NANOENTEK

EVETM HT counting kit consists of items necessary for counting cells with EVETM HT all in one package.

Supplier: GLASWARENFABRIK KARL HECHT

Sedgewick rafter counting chambers are used for counting particles and microorganisms in 1 ml of water or other transparent liquids, among other things for drinking water analysis. The counting chambers are made of high-quality optical glass with a chrome grid (counting net). The cell = 1 cm³ is graduated with a 1mm grid that divides 1 ml into 1000 μl.

Supplier: GLASWARENFABRIK KARL HECHT

Total area of ruling: 9,0 mm².

Supplier: GLASWARENFABRIK KARL HECHT

Double ruling chambers for blood tests and urine analysis

Supplier: GLASWARENFABRIK KARL HECHT

Thoma new counting chamber for blood tests and urine analysis.

Supplier: GLASWARENFABRIK KARL HECHT

These counting chambers are designed for blood tests and urine analysis.

Supplier: Merck

FTO glass materials have thermal and heated glass performance properties, while also increasing light transmittance and optimising electrical conductivity. Fluorine doped tin oxide is relatively stable under atmospheric conditions, chemically inert, mechanically hard, high-temperature resistant, has a high tolerance to physical abrasion and is less expensive than indium tin oxide.

Supplier: MARIENFELD

Counting chambers designed for the investigation of fruit juices.

Supplier: MARIENFELD

These counting chambers are designed for counting leucocytes and erythrocytes.

Supplier: MARIENFELD

Counting chambers according to Sedgewick for particles and microorganisms in transparent liquids.

Supplier: MARIENFELD

These counting chambers are suitable for counting leucocytes and erythrocytes.

Supplier: MARIENFELD

Designed for the determination of the yeast cell number and IVD applications.

Supplier: MARIENFELD

Counting chambers specially designed for in vitro diagnostic.

Supplier: MARIENFELD

Petroff cell counters for in vitro diagnostic applications with special depth.

Supplier: KOVA INTERNATIONAL

Designed to reduces pipetting errors and eliminate variable that could interfere with microscopic urinalysis (UA).

Supplier: MARIENFELD

Glass counting chambers equipped with two sets of grids, engraved into two ground, and polished surfaces on the central ridge. This central ridge is located between two elevated ridges, that are also ground and polished.

Supplier: MARIENFELD

This counting chamber is designed for applications with solid media.

Supplier: MARIENFELD

Blood counting chambers with clips.

Supplier: MARIENFELD

These counting chambers are designed for counting leucocytes and erythrocytes.

Supplier: MARIENFELD

This cell counter is suitable for liquid media.

Supplier: MARIENFELD

These counting chambers with V-slash facilitates the feeding of the capillary gap between chamber bottom and haemacytometer cover glass with reduced risk of overflow.

Supplier: MARIENFELD

These counting chambers are designed for leucocytes and erythrocytes in in vitro applications.

Supplier: MARIENFELD

These counting chambers with double net ruling are suitable for blood tests in vitro diagnostic (IVD) applications.

Supplier: Corning

The Corning counting chamber is a reusable glass cell counting slide for the Corning cell counter.

Supplier: KOVA INTERNATIONAL

Fast Read 102 systems are made of a disposable plastic slide and designed for the standardisation of microscopic urinalysis.

Supplier: BELLCO GLASS

These microscopy slides with three printed rings allow for counting bacteria by spreading a known volume of solution over a known area for the calculation of bacteria per sample.

Supplier: BRAND

This counting chamber is used for counting cells in the cerebro-spinal fluid (CSF) as well as for counting nematodes.

Supplier: HIRSCHMANN

Counting chambers with double net ruling.

Supplier: BRAND

This counting chamber is commonly used for applications with nematodes.

Supplier: HIRSCHMANN

Thoma new counting chambers with double net ruling.