You searched for: Microplate Seals

Supplier: iST Scientific Ltd

Clear pierceable film ideal for PP, PE, PS and COC plates. Suitable for use with the ABI 3730 sequencer as the thinner structure pierces more easily.

Supplier: BRAND

Aluminium sealing film can be pierced easily with a pipette tip for sample removal. Temperature range: −80 to +120 °C.

Supplier: THERMO MATRIX TECHNOLOGIES

The gas permeable adhesive seal provides a simple and effective way of venting cultures whilst providing a barrier against contaminating bacteria. When used in conjunction with Thermo Scientific storage plates, bacterial growth can be increased by over 50%, compared to plates sealed with an aluminium foil seal or sealing mat.

Supplier: SIMPORT SCIENTIFIC

Adhesive sealing films reduce sample-to-sample or well-to-well contamination and/or spill over. SecureSeal™ has the differential advantage of perforated end tabs and a multiple split backing which allow for easier and more accurate positioning and more secure sealing. The polyester based film with acrylic adhesive is inert and thus compatible with almost all microplate procedures. SecureSeal™ is less than 0,001% moisture permeable under high humidity conditions and less than 0,01% oxygen permeable.

Supplier: SIMPORT SCIENTIFIC

Superflex™, Microplate seal, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, Closure for SuperFlex™ 96-well PCR plates, PP, Clear, Non sterile

Supplier: iST Scientific Ltd

Non woven gas permeable and peelable seal for PP and PS plates. Suitable for short term incubation, agriculture and seed storage, insect storage, cell culture.

Supplier: SIMPORT SCIENTIFIC

Transparent adhesive sealing film is ideal for reducing cross contamination and/or spill over in PCR applications. 

Supplier: BRAND

Black sealing film made of vinyl is highly suitable for fluorescence measurements because of its light-absorbing characteristics. Temperature range: −40 to +80 °C.

Supplier: SIMPORT SCIENTIFIC

These adhesive films, suppliedin sheets, are compatible with most automated adhesive SBS plate sealers.

Supplier: BRAND

This film is ideal for PCR, ELISA and sample storage. Due to its adhesive, it can be used down to –80 °C, is DMSO resistant and resistant to common solvents.

Supplier: Thermo Fisher Scientific

Microplate sealing tape consisting of pre-cut, pressure-sensitive sheets for sealing the surface of standard 96-well or 384-well microplates during incubation steps.

Supplier: iST Scientific Ltd

Peelable, strong bonding foil for polypropylene plates. Suitable for PCR, specifically water thermal cyclers, storage of solvents and other organics, including acids and alkaline, also for long term storage and transportation at low temperature.

Supplier: iST Scientific Ltd

Pierceable, peelable barrier foil for PCR and sample storage.

Supplier: iST Scientific Ltd

Transparent DMSO resistant film with piercing X. Suitable for sample access and retrieval for 96 well plates for use with autosamplers and sequencers.

Supplier: BRAND

Chemical resistant PE/PP film offers adhesive-free areas over the wells to avoid contamination. Furthermore, it can be pierced easily with a pipette tip (for sample removal). Temperature range: −40 to +90 °C.

Supplier: iST Scientific Ltd

Clear perforated gas permeable film for PP, PE, PS and COC plates. Suitable for short term incubation, agriculture and seed storage, insect storage, cell culture.

Supplier: BRAND

Highly transparent film made of polyester is suitable for Real-Time PCR measurements. Temperature range: −40 to +120 °C.

Supplier: RATIOLAB

Microplate seal, Cap strip, Single sheet/mat/strip, Closure, 8-Cap Strips, TPE, TPE, Non sterile

Supplier: Whatman products (Cytiva)

Seals are used to control humidity and reduce evaporation of samples. They prevent spills and contamination.

Supplier: BRAND

Microplate seal, Cap strip, Single sheet/mat/strip, Cap strips, 8-strip, domed top, PCR cap strips of 8, clear, domed, for skirted low profile PCR plates

Supplier: iST Scientific Ltd

Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. The ClearASeal Peel is an optically clear laminate film forming a peelable seal to polypropylene, polyethylene, polystyrene, polycarbonate and cyclic olefin copolymer (COC) plates

Supplier: iST Scientific Ltd

Peelable foil laminate for polyproylene plates. Suitable for PCR, low temperature, short term compound storage, short term room temperature compound storage (less than 5 days).

Supplier: iST Scientific Ltd

Clear strong bonding film ideal for water thermal cyclers. Suitable for qPCR, PCR (water bath thermal cycling), storage, sample inspection, disposal of hazardous materials, use with DMSO.

Supplier: BRAND

Gas permeable films (sterile/non sterile) are popular for growing cells and microorganisms. Temperature range: −20 to +80 °C.

Supplier: OMEGA BIOTEK

AeraSeal is a 114 µm thick, hydrophobic porous film with medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth.

Supplier: PRIMERDESIGN

Microplate seal, Cap strip, Single sheet/mat/strip, Cap seals, Cap seals for BrightWhite 96-well plates, 8-strips

Supplier: MP BIOMEDICALS

Clear adhesive seals for multiwell plates and tissue culture plates.

Supplier: MP BIOMEDICALS

Microplate seal, Heat sealing film/foil/tape (96/384 wells), Single sheet/mat/strip, Plate sealer

Supplier: EPPENDORF

Ensure airtight sealing of your PCR plates with Eppendorf® PCR films and foils. Tailor your choice to your assay needs, like the Masterclear® real-time PCR film, optimal for qPCR with its superior optical characteristics, or heat-sealing options for the best evaportion protection.

Supplier: Corning

This reflective aluminium film is ideal for sealing plates containing light sensitive samples. Seals during the thermo cycling process, when used in conjunction with a compression mat. Also provides an excellent seal when used with other polystyrene and polypropylene microplates.