You searched for: Bags
The bag selection offers a wide variety of carrying devices to aid in all laboratory functions and even general-purpose uses where the added flexibility that comes with a bag is of the utmost importance. These bags are durable, built based on purpose, and will last under pressure. Containing substances safely for storage or transportation, the bags guarantee that contents will not be lost or contaminated.
Liners for HyPerforma™ Mixer DS 300 Bags
Supplier: THERMO BIOPROCESS DIVISION
The liners are designed to fit 'out-of-the-box'. It is applicable to all open- and closed-top mixing applications.
Expand 2 Items
Autoclavable Bags, Biohazard
Supplier: RATIOLAB
Autoclavable PP bags for the disposal of contaminated labware.
Expand 1 Items
Filter bags, BagFilter®
Supplier: INTERSCIENCE
These lateral filter bags are with non-woven filter that are ideal for the homogenisation and automatic filtration of the samples.
Expand 4 Items
Duffle Bag, Lockout
Supplier: BRADY
These duffle bags are made of 600 denier polyester that are used for lock out kits.
Expand 1 Items
Filter bags, BagPage®
Supplier: INTERSCIENCE
BagPage® single use bags with filter membrane reduce analysis time thanks to their wide opening and markings showing where to introduce the pipette. Ideal for pasty products, cheese, flour and cakes. To use: Place the sample in the opened compartment (Fig. 1). Mix and then add reagents into the specially designed compartment (Fig. 2).
Expand 6 Items
Biohazard Bags
Supplier: RATIOLAB
These disposable waste bags are made from strong PP film with a broad seam at the bottom. Intended for the sterilisation and disposal of hazardous and contaminated labware.
Expand 4 Items
Autoclave Bags, High Transparency
Supplier: RATIOLAB
Bags of very strong PP-film with a broad seam at the bottom, for the disposal of contaminated labware.
Expand 4 Items
Autoclave Bags with Steam Indicator, DuPont™ Tyvek® 1422A
Supplier: KEYSTONE CLEANROOM PRODUCTS
Tyvek® 1422A autoclave bags with steam indicators can be used as either the inner, or outer bag for the steam sterilisation of pharmaceutical change parts.
Expand 133 Items
Autoclave Self-Seal Bags with Steam Indicator, Tyvek® 1073B
Supplier: KEYSTONE CLEANROOM PRODUCTS
Self-sealing Tyvek® 1073B bags are ideal for steam sterilisation of pharmaceutical components such as vial and syringe stoppers and caps as well as heavy equipment parts with sharp edges. No need to use or validate a heat sealing machine.
Expand 67 Items
BinLiners™ and BinLiner™ Stands
Supplier: VWR Collection
LDPE Micronova BinLiners™ are ideal for the collection and disposal of waste, collection and transportation of parts or raw materials, and storage in cleanrooms and controlled environments. Thickness of 1 to 6 mm available for a variety of applications; including covering equipment, holding production waste, document storage, lining large production totes and so on.
Expand 15 Items
Autoclave Bags with Steam Indicator, Self-Seal, DuPont™ Tyvek® 1422A
Supplier: KEYSTONE CLEANROOM PRODUCTS
Self-sealing Tyvek® 1422A autoclave bags with steam indicators can be used as either the inner, or outer bag for the steam sterilisation of pharmaceutical change parts.
Expand 137 Items
Autoclave Bags with Steam Indicator, Self-Seal, Heavy Duty SMS
Supplier: KEYSTONE CLEANROOM PRODUCTS
Self Sealing Heavy Duty SMS Autoclave Bags from Keystone Cleanroom Products are designed to satisfy the most stringent requirements in the sterilisation of critical pharmaceutical equipment and components.
Expand 22 Items
Stopper Bag Tubings, Tyvek® 1073B/HDPE
Supplier: KEYSTONE CLEANROOM PRODUCTS
Tyvek® 1073B/HDPE autoclave continuous form tubing is ideal for steam sterilisation of pharmaceutical components such as vial and syringe stoppers and caps. Also a good choice for heavy equipment parts where visibility into the bag is required. Tubing form allows for the creation of bags of any length, giving excellent sizing flexibility.
Expand 17 Items
Autoclave Bags with Steam Indicator, Heat Seal, Tyvek® 1073B
Supplier: KEYSTONE CLEANROOM PRODUCTS
Tyvek® 1073B bags are ideal for steam sterilisation of pharmaceutical components such as vial and syringe stoppers and caps as well as heavy equipment parts with sharp edges.
Expand 59 Items
Filling needle autoclave bags with drawstring, Tyvek® 1422A
Supplier: KEYSTONE CLEANROOM PRODUCTS
Protect your filling needles from accidental touching after they are removed from the primary sterilisation packaging. Also creates secondary level of protection during aseptic presentation.
Expand 36 Items
VWR® Bucket Liners, Sterile
Supplier: VWR Collection
Bucket liners create an impermeable barrier between the disinfectant and receptacle.
Expand 2 Items
Slide Closure Zip Lock Bags, Sterile
Supplier: KEYSTONE CLEANROOM PRODUCTS
Pre-sterilised and packaged in multiple layers of Tyvek peel pouches and poly bags to gain access into the aseptic area without excessive spraying and wiping with sanitisation agents. The bags are used for the removal and transport of media plates from the aseptic area to QC laboratories.
Expand 1 Items
PureBag LDPE Sample Bags
Supplier: SAMPLING SYSTEMS
PureBag for sealing powders or liquids.
Expand 4 Items
Bags, zip seal, Nalgene®
Supplier: Thermo Fisher Scientific
Ideal for small lab items, botanical samples and other specimens. Not recommended for storing liquids. LDPE, 101 µm.
Expand 4 Items
Mop bucket liners, gamma irradiated, 4 mil thick
Supplier: KEYSTONE CLEANROOM PRODUCTS
Reduce the number of janitorial steam sterilisation loads by using gamma irradiated mop bucket liners. Instead of before every cleaning, the mop bucket system is typically autoclaved only once per week, but with each cleaning, a new sterile mop bucket liner pack is opened, the bucket is lined, and cleaning solution is added to it for cleaning.
Expand 10 Items
Filling Needle Autoclave Bags with Steam Indicator and Tyvek® Drawstring Closure, BHD
Supplier: KEYSTONE CLEANROOM PRODUCTS
These bags protects needles from accidental touching after they are removed from the primary sterilisation packaging.
Expand 8 Items
Pre-Sterilised Media Plate Transport and Incubation Bags
Supplier: KEYSTONE CLEANROOM PRODUCTS
Eliminate the risk and expense of investigating the root causes of false positives with Keystone Cleanroom Products Sterile media plate transport and incubation bag system.
Expand 4 Items
DuPont™ Tyvek® 1073B Self-Sealing Autoclave Bags with Steam Indicator
Supplier: KEYSTONE CLEANROOM PRODUCTS
Self-sealing 1073B Tyvek® are ideal for steam sterilization of pharmaceutical components such as vial and syringe stoppers and caps as well as heavy equipment parts with sharp edges. No need to use or validate a heat sealing machine.
Expand 1 Items
Bags, Hazard BinLiner™
Supplier: MICRONOVA
These low density polyethylene Hazard BinLiner™ bags are designed for containing biomedical and hazardous waste in aseptic and controlled environments.
Expand 4 Items
Easy-Tear Stopper Bags, with Steam Indicator, 1073B Tyvek/HDPE
Supplier: KEYSTONE CLEANROOM PRODUCTS
Easy-Tear Tyvek bags from Keystone Cleanroom Products are designed to satisfy the most stringent requirements in the sterilisation of critical pharmaceutical equipment and components.
Expand 6 Items
Sample bags, SP Bel-Art
Supplier: Bel-Art Products, a Part of SP
These utility reusable, transparent PE bags have variety of applications such as they are ideal for shipping, storage and are especially useful as sample bags.
Expand 4 Items
Urine Collection Bags
Supplier: BRAUN
Urinocol® urine bags are PVC-free with protective film for better peeling and attachment by dividing the film possible and is latex-free with better adhesive properties for paediatric use.
Expand 3 Items
Autoclavable Bags
Supplier: THERMO STERILIN
The bags in PP can withstand temperatures up to 134 °C.
Expand 1 Items
Balloons, with Hose Connection
Supplier: DEUTSCH NEUMANN
These are red natural rubber latex balloon suitable for rotary evaporators for mixing or collecting gas and for controlling air or gas flows at suitable equipment. It also features a tubing with length 140 mm and diameter 12 mm.
Expand 2 Items
Lab blender bags, Stomacher®
Supplier: FERMIONX SEWARD
Stomacher® bags are all manufactured from virgin polymer granule extruded into a tube. The only seal is at the base. All bags are batch tested and in-process monitored during manufacturing on Stomacher® machines. Bags are tested against a wide range of parameters that include open-ability, transparency, and flexibility as well as dimensions and performance. Stomacher® bags come in a range of formats to suit all applications.