Supplier: VWR Chemicals

Sodium acetate buffer, VWR®, 3 M, pH value: 5,2

Supplier: VWR Chemicals

Irradiated solution, pH 7,2, for washing blots.

Supplier: ROCKLAND

GET buffer (50 mM Glucose, 10 mM EDTA, 25 mM Tris HCl, pH 8,0) is used in effective plasmid miniprep.

Supplier: G BIOSCIENCES

The conjugation and modification reactions used to cross-link proteins or couple labels to proteins, such as biotin, enzymes, and fluorescent dyes, require certain conditions, including pH and chemical composition for optimal conjugation. Many common buffers routinely used in laboratories have an inhibitory effect on conjugation reactions; for example, Tris buffers inhibit coupling to amines.

Supplier: Enzo Life Sciences

RIPA cell lysis buffer 2, Enzo Life Sciences

Supplier: G BIOSCIENCES

Premixed buffer powders that simply require adding deionised water to generate a ready-to-use buffer.

Supplier: VWR Chemicals

PBS Tween® 20 blot wash buffer is a 20X concentration with 1% Tween® 20.

Supplier: BIOTIUM

Ready-to-use formaldehyde-based fixation buffer for immunofluorescence staining for microscopy or flow cytometry.

Supplier: VWR Chemicals

This material is intended for use as an ionisation buffer for AAS

Supplier: Enzo Life Sciences

Caspase cell lysis buffer, Enzo Life Sciences

Supplier: Enzo Life Sciences

50 mM HEPES, pH 7,4, 100 mM NaCl, 0,1% CHAPS, 10 mM DTT, 1 mM EDTA, 10% glycerol.

Supplier: PanReac AppliChem

PBS Tablets for preparation of 200 ml phosphate buffered saline (PBS). Composition of 140 mM sodium chloride, 2,7 mM potassium chloride and 10 mM phosphate.

Supplier: ROCKLAND

This product was aseptically filtered through a Millipore 0,22 µm filter into clean, pre-sterilised containers. The product was tested on trypticase soy agar for 24 hours, 48 hours and 72 hours and was found to be negative for bacteria.

Supplier: VWR Chemicals

With diethyl pyrocarbonate (DEPC).

Supplier: NOVUS BIOLOGICALS

10X Tris-EDTA buffer pH 9.0.

Supplier: BIOTIUM

6X GelRed prestain loading buffers are gel loading buffers containing density agents, tracking dyes, and GelRed dye. GelRed is a sensitive, stable and environmentally safe fluorescent nucleic acid dyes designed to replace the highly toxic ethidium bromide (EtBr).

Supplier: VWR Chemicals

Cell culture buffer, TRIS buffer solution pH 7,4 (0,1 mol/l)

Supplier: CAYMAN

Potassium phosphate buffer solution (0,5 mol/l), pH value: 9,0

Supplier: Enzo Life Sciences

Wash Buffer Salts can be used in tissue preparations, immunohistochemical staining procedures and in assays that require HRP-linked detection reagents.

Supplier: VWR Chemicals

This material is intended for use as an ionisation buffer for AAS

Supplier: VWR Chemicals

Irradiated concentrate of PBS, suitable for use in washing cells after dilution.

Supplier: VWR Chemicals

Phosphate Buffered Saline (PBS) with 0,05% Tween® 20, pH 7,5 is a ready-to-use 1× concentration.

Supplier: BIOTIUM

Fish gelatin is commonly used in blocking solutions to minimise background noise in immunodetection procedures such as Western Blotting and immunostaining. Fish gelatin can be used to block non-specific binding sites on positively charged nylon or PVDF membranes or for blocking and dilution of antibodies during immunostaining procedures. Unlike BSA or milk, fish gelatin does not contain IgG or serum proteins that could cross-react with mammalian antibodies.

Supplier: PanReac AppliChem

10X concentrated solution of 0,89 M Tris, 0,89 M boric acid and 0,02 M EDTA.Na₂, pH 8,3 ±0,2.

Supplier: CAYMAN

Formulation: Concentrated TBS (250 mM Tris-base; pH 7,4; 1,37 M sodium chloride and 27 mM KCl).

Supplier: ROCKLAND

This product is ready-to-use as a working 1X solution and requires no further dilution. This buffer consists of 60 mM Calcium Chloride, 15% v/v Glycerol, 10mM Tris HCl at a pH of 7,5.

Supplier: ABCAM

Blocking Buffer 10X is part of the reagents, controls and accessories range.

Supplier: VWR Chemicals

Hybridisation cocktail offering blocking and hybridisation for optimised complimentary base pairing of DNA and RNA in Southern blot, Northern blot, dot blot, colony and in situ hybridisation.

Supplier: Enzo Life Sciences

The RIPA liquid cell lysis buffer composes of 50 mM TRIS-hydrogen chloride, pH 7,4, containing 150 mM sodium chloride, 1 mM EDTA, 1 mM EGTA, 1,2% Triton X-100, 0,5% sodium deoxycholate, and 0,1% SDS.

Supplier: 3M FOOD SAFETY

The 3M™ Mini Flip-Top Vial with 9 ml Butterfield's Buffer is a leak-resistant plastic cylinder with a flip-open lid that seals securely for safe shipping and handling.