You searched for: Petroleum Industry Standards
Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.
Flash point standards, Cleveland open cup, ASTM D 92, Supelco®
Supplier: Merck
These UKAS certified standards are specifically designed to be used for regular instrument performance checks.
Expand 5 Items
ASTM® D5442 quantitative linearity standard, C12 - C50, analytical standard, Supelco®
Supplier: Merck
ASTM(R) D5442 Quantitative Linearity Standard, C12 - C50, Supelco®, 0.01 % (w/w) each component in cyclohexane
Expand 1 Items
ASTM® D4815 valve timing mix, analytical standard, Supelco®
Supplier: Merck
ASTM(R) D4815 Valve Timing Mix, Supelco®, (each component at the nominal wt% indicated)
Expand 1 Items
Why Choose Corning Fetal Bovine Serum?
Our vertically integrated FBS serum supply chain, from collection to scientist, allows us to provide a consistent supply of FBS.
n-Paraffin Mix C24, C28, C32, C36, certified reference material, Supelco®
Supplier: Merck
n-Paraffin Mix C24, C28, C32, C36, Supelco®, 2 % (w/w) each component in octane
Expand 1 Items
Intermediate polar column test mix, certified reference material, Supelco®
Supplier: Merck
Intermediate Polar Column Test Mix, TraceCERT®, Supelco®, 500 mug/mL in dichloromethane, Certified reference material, Pk Info: ampule of 2 mL
Expand 1 Items
ASTM® D5442 C12-C60 qualitative retention time mix, analytical standard, Supelco®
Supplier: Merck
ASTM(R) D5442 C12-C60 Qualitative Retention Time Mix, Supelco®, 6.25 % (w/w) each component
Expand 1 Items
Tetratetracontane, analytical standard, Supelco®
Supplier: Merck
Tetratetracontane ≥98.0% (GC), Supelco®
Expand 1 Items
Flash point standards, Pensky Martens closed cup, ASTM D 93, Supelco®
Supplier: Merck
Procedure A is applicable to distillate fuels - diesels, bio-diesel blends, kerosene, heating oil, turbine fuels and lubricating oils. These UKAS certified standards are specifically designed to be used for regular instrument performance checks.
Expand 6 Items
No. 2 Fuel oil, refinery grade, certified reference material, Supelco®
Supplier: Merck
No. 2 Fuel Oil, refinery grade, Supelco®, 20000 mug/mL in methanol
Expand 1 Items
Alkane standard mixture for performance tests of GC-systems, C10 - C40 (all even), analytical standard, Supelco®
Supplier: Merck
Alkane standard mixture for performance tests of GC-systems, C10 - C40 (all even), Supelco®, 50 mg/l each
Expand 1 Items
ASTM® D5441 MTBE contaminants (low) mix B, analytical standard, Supelco®
Supplier: Merck
ASTM(R) D5441 MTBE Contaminants (low) Mix B, Supelco®, 0.1 % (w/w) each component in methyl tert-butyl ether
Expand 1 Items
ASTM® D5307 crude oil internal standard, certified reference material, Supelco®
Supplier: Merck
ASTM® D5307 crude oil internal standard has been used in the quantitative determination of diamondoid compounds like adamantane in specific organic solvents like dichloromethane, hexane, carbon-tetrachloride, hexane , heptadecane, hexadecane, pentadecane and tetradecane, using infrared attenuated total reflection spectroscopy (IR-ATR).
Expand 1 Items
Fuel oil - trace elements, NIST-1634C reference material
Supplier: PROMOCHEM
NIST-1634C standard, fuel oil- trace elements
Expand 1 Items
Oil analysis standards, phosphorus in 20 blank oil, CONOSTAN®
Supplier: PROMOCHEM
Phosphorus in 20 blank oil, 1000 µg/g
Expand 1 Items
Cloud Point Standard, ASTM D2500 and ISO 3015 (Diesel) (PPCPD)
Supplier: CUSTOM MADE CHEMICALS LAB
Cloud point standard, Flash point: 62,5 °C, ASTM D2500, ISO3015
Expand 1 Items
Elemental analysis standards, soot content standards, VHG
Supplier: PROMOCHEM
This reference or calibration standard is intended for use in the determination of soot in diesel motor oil by infrared spectroscopy and other technique.
Expand 6 Items
Calcinated petroleum coke - trace elements
Supplier: PROMOCHEM
This reference standard is intended primarily for use in the calibration of apparatus and the evaluation of techniques employed in the analysis of calcined petroleum coke and other materials with a similar matrix.
Expand 1 Items
Residual fuel oil - sulphur, NIST-1622E reference material
Supplier: PROMOCHEM
This reference standards are intended for use in the calibration of instruments and the evaluation of methods used in the determination of total sulphur in fuel oils and materials of similar matrix.
Expand 1 Items
Reference standard, water saturated octanol, NIST
Supplier: PROMOCHEM
NIST-2890, water saturated octanol, NIST
Expand 1 Items
Elemental analysis standards, custom blend S-21+K, CONOSTAN
Supplier: PROMOCHEM
Custom blend S-21+K, CONOSTAN®, 885 ppm
Expand 1 Items
Petroleum standards, heavy mineral oils, CRM
Supplier: PROMOCHEM
This matrix material solution is intended for use as a diluent for other metallo-organic standards.
Expand 2 Items
Total Acid Number (TAN) Standards
Supplier: CUSTOM MADE CHEMICALS LAB
Total acid number TAN 17034, 2 mg KOH/g
Expand 4 Items
Biodiesel blank, VHG
Supplier: PROMOCHEM
This solution for using as calibration blank for biodiesel metals and sulphur analysis.
Expand 2 Items
Reference materials, cloud point reference, VHG
Supplier: PROMOCHEM
These reference materials are intended for use in accordance with ASTM D2500 for the determination of the cloud point of petroleum products. The cloud point of a petroleum product is an index of the lowest temperature of their utility for certain applications.
Expand 1 Items
Reference materials, acid number standards, in hydrocarbon oil, VHG
Supplier: PROMOCHEM
These reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).
Expand 1 Items
Reference materials, base number standards, in hydrocarbon oil
Supplier: PROMOCHEM
These reference materials are intended for use in the determination of base number (AN) in petroleum products in accordance with ASTM D2896/IP 276 (by potentiometric perchloric acid titration) or ASTM D4739 (by potentiometric titration).
Expand 13 Items
Reference materials, acid number standards, total acid number (TAN)
Supplier: PROMOCHEM
Acid number reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).
Expand 2 Items
Biodiesel standards, sulphur in B100 biodiesel, VHG
Supplier: PROMOCHEM
This standard solution is intended for use as a certified reference material and calibration standard for the analysis of sulphur in B100 biodiesel using x-ray fluorescence spectrometry (XRF) and other techniques for sulphur analysis.
Expand 3 Items
Gasoline fuel dilution standards, VHG
Supplier: PROMOCHEM
This standard is intended for use in the determination of gasoline in used gasoline engine oil by gas chromatography (GC), IR, fuel dilution meter (fuel sniffer) and flash point analyser.