117 Results for: "Single-Use Lab Coats"

Supplier: Bel-Art Products, a Part of SP

Designed for one hand label making, the dispenser comes with a weighted bottom with non-skid pads to avoid sliding or lifting. The epoxy-coated steel platform has a jagged edge and finger holes for releasing the label tape. The writing platform accommodates left and right-handed users. Dispenser accepts any tape with a 7,6 cm core and maximum OD of 133 mm. Ideal for use with Write-On™ Label Tape. Dimensions: 213× 87×95 mm, platform: 102×152 mm, shipping weight: 1,8 kg.

Supplier: VWR Chemicals

A ready to use kit that fits into your lab coat pocket.

Supplier: VWR Chemicals

A ready to use kit that fits into your lab coat pocket.

Supplier: VWR Chemicals

A ready to use kit that fits into your lab coat pocket.

Supplier: VWR Collection

Vortex mixer suitable for single, small containers up to 30 mm in diameter, for example, test tubes, centrifuge tubes and microtubes. The upper casing is PP and the test tube surface is made from inert TPU-plastic; the bottom section is a coated, zinc die-casting.

Supplier: VWR Chemicals

A ready to use kit that fits into your lab coat pocket. Intended for water-based samples

Supplier: VWR Collection

These coats are made from Protect Xtra fabric which is a further development of the Protect fabric consisting of 100% polyester weave with conductive yarn (warp). This fabric has been especially designed for use in critical areas (e.g. operating rooms, sterile environments). Thanks to the PTFE finish, the coats provide very good splash protection against liquids and other contamination. The fabric has good tensile strength and provides very good resistance to microbial penetration.

Supplier: VWR Chemicals

A ready to use kit that fits into your lab coat pocket.

Supplier: DuPont

These lab coats with bound neck, model IC270BWH WS, deliver an ideal balance of protection, durability, and comfort. Made using a patented flash spinning process, Tyvek® provides an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash.

Supplier: VWR Chemicals

A ready to use kit that fits into your lab coat pocket.

Supplier: HUBEI ORIENT INTL TRADING

These disposable PP trousers are ideal for use in combination with PP lab coats.

Supplier: MICRONOVA

This tape dispenser is a combination of coated steel and plastic. Designed for use with Micronova tapes of up to 7,62 cm width.

Supplier: VWR Collection

These coats are made from Protect Xtra fabric which is a further development of the Protect fabric consisting of 100% polyester weave with conductive yarn (warp). This fabric has been especially designed for use in critical areas (e.g. operating rooms, sterile environments). Thanks to the PTFE finish, the coats provide very good splash protection against liquids and other contamination. The fabric has good tensile strength and provides very good resistance to microbial penetration.

Supplier: Portwest

This versatile coat features a concealed stud front, two lower patch pockets, and a single chest pocket.

Supplier: LABCONCO

Protector® work stations are specifically designed for the needs of pathologists and histotechnologists. Like a traditional fume hood, these enclosures have a front air foil and rear baffle to direct the inflow air across the work area and away from the operator. Ideal for cramped or crowded labs, protector work stations have a low profile so they fit easily under standard upper cabinets. Designed with a built-in blower which use specially treated carbon filters.

Supplier: ALSICO HIGHTECH

This cleanroom coat is made of Alsistrong® (98% polyester and 2% carbon). Suitable for C and D classes or ISO 7 to 9 cleanrooms. Can also be used for clean areas or as lab coat.

Supplier: Medicom

These disposable PP trousers are ideal for use in combination with PP lab coats.

Supplier: Industrial Physics

Perfect tool to use for inspection of professional coating jobs on large structures, ships, tanks, buildings etc.. The inspection mirrors offers a clear view on hard-to-reach places and ideal for a visual inspection for “holy-days” and general quality control for matters as coverage, cleanliness of blasted steel etc.

Supplier: Medicom

These disposable coats made of PP are ideal for use in non hazardous areas.

Supplier: KIMBERLY CLARK

These lab coats made from film coated PP with triple stitched seams are ideal for use in both research and manufacturing environments in pharmaceutical, biochemistry, biomedical, cosmetics, forensics, and other applications. They protect the user against low risk liquid chemicals in the form of light splashes, sprays and aerosols.

Supplier: MUTEXIL

Disposable non woven coats with collar. Ideal for use in industrial and food environments.

Supplier: Zellstoff-Vertriebs-GmbH & Co. KG

Disposable fleece smock made of of spunbond PP. Ideal for use in sensitive work areas, such an the food processing industry.

Supplier: Zellstoff-Vertriebs-GmbH & Co. KG

These disposable coats are made of spunbond PP fleece. Ideal for use in sensitive work areas, such as the food processing industry and other hygienic environments.

Supplier: Portwest

This food coat made from durable Fortis Plus fabric (65% polyester, 35% cotton) is smart and practical, making it ideal for use in food preparation environments as it can withstand the rigours of a busy workplace.

Supplier: MUTEXIL

Disposable non woven frocks with collar. Suitable for use in industrial and food environments.

Supplier: LABCONCO

This mobile equipment table may be used to transport heavy equipment and to provide auxiliary bench space. With height adjustments from 28,75 to 35,75", it may be raised to the same height as most laboratory benchtops. Solid epoxy work surface, powder-coated square tubular steel frame.

Supplier: Liebherr

Glass/steel door high-volume refrigerators with forced air cooling. White steel exterior and stainless-steel interior. Choose between two temperature stability options to suit differing lab requirements. The intuitive user interfaces provide useful extended multi-functionality, e.g. a maintenance timer, and the LED interior lighting ensures good visibility of the contents of these large appliances. Advanced connectivity options to suit varying requirements for simplified data storage, temperature control and alarm signals. These advanced lab fridges also feature a +2 °C safety device to protect sensitive contents from freezing.

Supplier: Thermo Fisher Scientific

SureSTART™ Level 3 WebSeal™ Plate 96-well round U, V, and flat-bottom microtiter plates are designed for regulated labs that require high performing products. Level 3 well plates are for high performance applications and are suitable for regulated labs using all solvent types including non-polar solvents.

Supplier: LABORIAL

Innovative interactive worktop for laboratories, cleanrooms and healthcare. A hygienic design based on GMP guidlines which consists of a continuous, tempered glass surface on phenolic resin laminate in which is embedded a touch control screen, to provide an interactive worktop, all supported on a metallic structure. At the same time, it works as a regular worktop and solves the disinfection and contamination problems associated with the use of tablets, notebooks, PCs, keyboards and mouse in cleanrooms and other controlled environments. It allows access to any laboratory software such as electronic notebooks, LIMS, Wikis, analysis software, Office and others, on the laboratory workbench, whilst maintaining an aseptic environment. The interactive worktop can help to reduce traffic, in and out of critical areas in which the use of handheld computer devices are restricted or prohibited.

Supplier: Thermo Scientific

The LUT ovens are designed for drying paint and other coatings where solvents in the air can form explosive atmospheres, where there is a restriction on the maximum quantity of solvent*. The LUT 6050 F is for installation in areas subject to fire hazards, e.g. where laquers are handled. The inner chamber and all fittings are made of 1,4301 stainless steel, and insulating materials are free of surface active substances (no silicone is used). The formation of vapour pockets is avoided by a well directed air supply system, fresh air is filtered and pre-heated before it enters the chamber, a radial fan ensures the heated fresh air and solvent vapours mix efficiently.