Supplier: Restek

These single stage stainless steel VOC regulators features stainless steel diaphragm, two pressure gauges, CGA-180 fitting and Kel-F® seat.

Supplier: Restek

A 316 stainless steel knurled cap and Tefzel CPI ferrule seal to ¹/₈" Ext.Ø PTFE tubing when finger tightened onto the precision-machined filter holder.

Supplier: Restek

Capillary installation gauge made from stainless steel seats ferrules onto column for consistent installations.

Supplier: Restek

Injection port repair tool for agilent split/splitless injection ports.

Supplier: Restek

Graphite Ferrules for Vu2 union connectors.

Supplier: Restek

Direct injection Uniliner® liners minimise solvent and peak tailing. These are suitable for 6,35 mm packed column injection ports.

Supplier: Restek

Organic Standard, EFSA PAH4 Standard,1 ml/Ampule

Supplier: Restek

These adapters are made of high quality stainless steel.

Supplier: Restek

A mineral oil-based transformer oil (Exxon® Univolt® N-61), which has been tested to ensure it is PCB-free.

Supplier: Restek

Contains eight components, those are 2-chlorobiphenyl, 2,3-dichlorobiphenyl, 2,4,5-trichlorobiphenyl, 2,2',4,4'-tetrachlorobiphenyl, 2,2',3',4,6-pentachlorobiphenyl, 2,2',4,4',5,6'-hexachlorobiphenyl, 2,2',3,3',4,4',6-heptachlorobiphenyl and 2,2',3,3',4,5',6,6'-octachlorobiphenyl.

Supplier: Restek

The mix consists of (C10:0) Methyl decanoate (210 μg/ml), (C11:0) methyl undecanoate (210 μg/ml), (C12) n-dodecane 150 μg/ml, (C12:0) methyl dodecanoate (210 μg/ml), 2,3-butanediol (+/-) (500 μg/ml), 1-heptanol (180 μg/ml), 3-methylphenol (m-cresol) (160 μg/ml), 1-phenylethanol (+/-) (500 μg/ml) and α-pinene (+/-) (500 μg/ml).

Supplier: Restek

Organic Standard, Propylene glycol standard mix in P and T methanol, 1 ml/ampoule

Supplier: Restek

Each method development toolbox contain four USLC® stationary phases such as Biphenyl, Aqueous C18, IBD and PFP Propyl, for both UHPLC (1,9 µm) and HPLC (3 or 5 µm) columns of different lengths.

Supplier: Restek

These Hamilton syringes are designed and tested to meet critical autosampler performance needs. Needle point styles are designed to withstand multiple, rapid injections through a septum.

Supplier: Restek

Highly base-deactivated spherical silica manufactured by Restek. Monomeric C18 bonding. Hydrophobic C18 phase suitable for analyses of a wide range of compounds, from acidic through slightly basic. Replaces Hypersil® BDS C18 and Pinnacle® ODS Amine.

Supplier: Restek

These organisers are designed to hold lab supplies.

Supplier: Restek

High-capacity split vent traps reduce the release of hazardous materials from the capillary split vent into the lab.

Supplier: Restek

These gas-tight syringes with interchangeable barrels and plungers are suitable for gases or liquids.

Supplier: Restek

Ferrules are available in Vespel®, graphite or Vespel®/graphite.

Supplier: Restek

This sapphire scribe cuts fused silica tubing.

Supplier: Restek

The inlet liner packing tool can be used with all different liners.

Supplier: Restek

Organic Standard, m-Xylene 2,000 µg/ml in methanol, Pack type: Glass ampoule

Supplier: Restek

Chromatography vial, Crimp neck, 2,00 ml, Glass, Clear, Ø×H: 12×32 mm, Non sterile, Cap included: No

Supplier: Restek

These Vu-tight Direct injection (DI) liners are suitable for 6,35 mm packed injection port conversion. They are available in two designs and fit 0,32 and 0,53 mm ID capillary columns (column outer diameter from 0,5 mm to 0,8 mm).

Supplier: Restek

Volatiles MegaMix, EPA Method 624, MegaMix®, : N/A, 1 ml/ampoule

Supplier: Restek

General purpose columns for FAMEs, flavor compounds, essential oils, solvents, xylene isomers and US EPA Method 603 (acrolein/acrylonitrile).

Supplier: Restek

The ketones mix consists of five components they are acetone, 2-butanone (MEK), 1,1-dichloro-2-propanone, 2-hexanone and 4-methyl-2-pentanone (MIBK).

Supplier: Restek

The standard consists of (±)-geosmin and 2-methylisoborneol (MIB).

Supplier: Restek

For use with Parker Balston® zero air generators.

Supplier: Restek

This Parker HydroGen mate deionising water system is an economical means of providing deionized water to hydrogen generators or for other uses. It removes organics, phosphates, chlorine and essentially all ionizable constituents from water supply.