"Filtration systems"

Supplier: Cytiva

PD MidiTrap G-25 is convenient and rapid cleanup with high reproducibility and the potential for high throughput by running multiple samples in parallel, The use of centrifugation protocol with all gravity columns.

Supplier: INTERSCIENCE

Scan 50 pro is a manual colony counter with handpad and multiple ergonomic supports for improved posture, vision and hearing.

Supplier: Q BIOANALYTIC

Legionella spec. is tested usually with cultural methods. However, this may take up to 14 days to deliver results and some strains are living but are not culturable. Using this Real-Time PCR test you may have results already after a few hours. You can use this test in combination with an appropriate pre- enrichment or you can do a DNA purification directly from the filter without pre-enrichment. The kit is also suitable to confirm bacterial colonies on agar plates.

Supplier: Cytiva

HiTrap TALON® crude 1 and 5 ml columns allow for rapid separations and easy scale-up with a minimum of sample preparation and equipment.

Supplier: VACUUBRAND

Model CVC 3000: Fully electronic, highly versatile vacuum gauge and controller. The controller is equipped with a built-in capacitive absolute-pressure transducer made from alumina/ceramic as well as a built-in venting valve and switched outlets for a suction line valve and a coolant water valve. It eases work considerably and enables environmentally friendly operation whilst protecting samples, solvent recovery, reduced foam formation and superheating. The optimum vacuum setting can be found quickly and simply, even with unknown mixtures and pressures.

Supplier: SCOTSMAN

ACM ice cubers:
The ACM series self contained ice cube makers are air cooled, electronically controlled and manufactured from 304 stainless steel. They produce standard medium thimble shaped super cubes that are very hard and crystal clear. Thimble shaped cubes have a large surface area so that they melt slower than a standard cube and makes them better for chilling. It also means that they are less likely to stick together in the integral storage bin or in an ice bucket. The ice cubers require a 19 mm (0,75") ‘washing machine' type tapped mains water supply, a correctly rated power supply and a 38 mm (1,5") vented drain (ideally no higher than the base of the machine) within one metre of the machines intended position before delivery.
With integral ice cube storage bin.

Supplier: TIGER-VAC

This vacuum cleaner in stainless steel type 316 2B is designed for general clean up in contamination controlled environments, cleanroom compatible and can be used in the pharmaceutical industry.

Supplier: asecos

adapter, for use with recirculating air filter system ufa, height = 90 mm, sheet steel, coated for tall cabinets with width 1555 mm for model(s): xl90 1 * 1 items

Supplier: TIGER-VAC

New generation cleanroom vacuum cleaners available in dry recovery. Designed specifically for the pharmaceutical, semiconductor and microelectronics industry.

Supplier: Merck

Hardware system to test vacuum level of Milliflex Plus pump system (filtration pump for liquids) 1 * 1 items

Supplier: IKA

The VACSTAR lite Advanced Plus Solution package is a modern, user and environmentally friendly solution for your vacuum applications in the laboratory. By combining the VC 10 pro vacuum controller with the VACSTAR lite vacuum pump, automatic boiling point detection is available via the integrated solvent library. The desired setpoint can also be conveniently set manually via the large, easy-to-read TFT display. In addition, the program mode enables the simple programming of several ramp steps in order to efficiently control complex simulations. The VSE 1 emission condenser prevents solvents from being released into the room air, thus protecting users and the environment.

Supplier: Thermo Fisher Scientific

The proprietary hydrophilic bonded layer in these MAbPac SEC-1 Columns results in minimal non-desired interactions between the proteins and the stationary phase. The stationary phase is designed to handle different eluent conditions containing both high and low ionic strength mobile phases, as well as mass spectrometry friendly volatile eluents.

Supplier: VWR Collection

The VWR® PCR Workstation HEPA is a PCR enclosure for PCR sample preparation with an HEPA Filter. It offers dual-decontamination action by UV inactivation of airborne and surface-bound contaminants, therefore, representing an ideal environment for PCR set up and other sensitive protocols. In addition, the HEPA filter with UV provides a barrier against dust, bacteria and mould.

Supplier: Merck

Millipore MilliSolve Kit, 47 mm, Bottle-to-Bottle Filtration System 1 * 1 ST

Supplier: Merck

Plastic protector for one Milliflex Plus pump system (filtration pump for liquids) 1 * 1 items

Supplier: Merck

Printer system for Milliflex Plus pump hardware (filtration pump for liquids) 1 * 24 items