470 Results for: "Dräger"

Supplier: Dräger

The single gas detector is designed for manufacturing petrochemical products, aseptic packing or handling of rocket fuel and for handling hydrogen fluoride (HF), hydrochloric acid (HCl), hydrogen peroxide (H₂O₂) or hydrazine.

Supplier: Dräger

To measure the 'spot concentrations' of mercaptan for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

The X-am® 2500 was especially developed for use as personal protection. The 1 to 4 gas detector reliably detects combustible gases and vapours, as well as O₂, CO, H₂S, NO₂ and SO₂. Reliable and fully mature measuring technology, durable sensors and easy handling ensure a high degree of safety with extremely low operating costs.

Supplier: Dräger

Calibration gas with nitrogen background in non refillable cylinder.

Supplier: Dräger

This combined fire and industrial escape hood was developed with users, placing the focus on the fastest possible escape. Optimised operation and wearing comfort, a robust housing and a tested ABEK CO P3 filter ensure protection from toxic industrial and fire-related gases, vapours and particles for at least 15 minutes.

Supplier: Dräger

Specifically designed for fast measurements with one hand, this gas detector pump allows to use tested tubes under extreme conditions.

Supplier: Dräger

To measure the 'spot concentrations' of phosgene for use with an accuro® pump - Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, and air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

These chips are suitable for the gas analyser with chip measurement. They are calibrated for up to two years.

Supplier: Dräger

This gas detection system without sensor reliably measures combustible gases and vapours as well as oxygen, harmful concentrations and organic vapours.

Supplier: Dräger

The powered air-purifying respirator (PAPR) X-plore 8000 offers a number of user friendly standard and specialised carrying systems for standard and decontamination applications. Dräger has also developed a wide range of tight- and loose-fitting headgear such as half and full-face masks, short and long hoods and helmets with visor and protective visor. Standard and enhanced flexibility hoses are available and compatibility is ensured. Modular components: A wide range of components for every application.

Supplier: Dräger

To measure the 'spot concentrations' of acetone for use with an Accuro pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

The X-plore® 3300 and 3500 half masks are low maintenance and affordable. They are equipped with two lateral bayonet connections that enable a whole range of bayonet filters to be used.

Supplier: Dräger

To measure the 'spot concentrations' of perchloroethylene for use with an Accuro pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

Configurator for Dräger X-am® 2800 consisting of basic device with data logger, delivered with manufacturer and calibration certificate.

Supplier: Dräger

To measure the 'spot concentrations' of nitrogen dioxide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

Operating conditions: 0 to 40 °C ; up to 30 mg/l H₂O and for tube 5/a: 3 to 15 mg/l H₂O absolute humidity.

Supplier: Dräger

The Alcotest 7510 is a compact and robust handheld breath alcohol measuring instrument, especially designed for advanced screening applications.

Supplier: Dräger

The catalytic Ex sensor has high sensitivity to flammable gases and vapours, which is confirmed by the technical approval for measuring methane to nonane.

Supplier: Dräger

Wallholder PIN for Parat® Hard Case, ideal for placing stationary units in a central location, can be mounted to any Hard Case using the accessory attachment points

Supplier: Dräger

Ergonomic design and infrared sensor technology, the X-am 5600 is dedicated to the measurement of up to six gases (using dual gas sensors), employing from one to four sensors with one infrared sensor and three XXS EC sensors.

Supplier: Dräger

Half mask particle filter with protection level P100.

Supplier: Dräger

X-plore® 5500 full face masks offer the perfect solution wherever your work requires respiratory protection, e.g. in the chemical industry, metalworking and automotive industries, shipbuilding, maintenance, supply and disposal logistics. The double layered face seal with triple sealing action provides reliable protection and a tight fit for all face shapes and sizes. The large visor is available in two different materials: polycarbonate or triplex (excellent anti-scratch coating and high chemical-resistance).

Supplier: Dräger

Aerotest Alpha allows the quality of breathing air supplied by a compressor or compressed gas cylinder to be determined.

Supplier: Dräger

Bayonet adapter, Xplorer®, For: P100 Pancake Filter, X-plore® 3300/3500, X-plore® 5500

Supplier: Dräger

A small heating element in the device head heats an alcohol mixture with a high molecular weight and density similar to air.

Supplier: Dräger

System case for Alcotest® 7510, offers enough space for mobile printer, mouthpieces, batteries, paper rolls, charging cable, USB-cable, keyboard and more

Supplier: Dräger

To measure the 'spot concentrations' of phoshine for use with an Accuro® pump.

Supplier: Dräger

Carrying box for full face masks, Mabox, Parat®

Supplier: Dräger

Carrying case for X-plore® half masks, X-plore® 2100

Supplier: Dräger

To measure the 'spot concentrations' of xylene for use with an Accuro® pump. Cross sensitivity: Styrene, vinyl acetate, toluene, ethyl benzene and acetaldehyde are indicated, but with different sensitivities. No interference by: