1194 Results for: "Cole Parmer"

Supplier: Cole Parmer

No more reading glass thermometers.

Supplier: Cole Parmer

Battery operated, ideal for use almost anywhere.

Supplier: Cole Parmer

Compact, powerful, and programmable microcentrifuge.

Supplier: Cole Parmer

Shaker and incubator combination makes these devices ideal for cell culture procedures.

Supplier: Cole Parmer

Specifically designed to mix small volumes of liquid in a temperature-controlled environment.

Supplier: Cole Parmer

Impervious to chemical attack, even concentrated acids.

Supplier: Cole Parmer

Strong stirring and precise heating for large-volume requirements.

Supplier: Cole Parmer

Reduce drying time and contain spilled liquids with this chemical resistant containment tray. Holds one ¹/₄ L of spilled liquid. Easy to clean simply lift off the white grid and empty.

Supplier: Cole Parmer

Mini vortex mixer with a vigorous mixing action is ideal for re-suspension of cells and pellets. It is a simple device, commonly used in laboratories to mix small vials of liquid, such as reagents of an assay.

Supplier: Cole Parmer

Rotators give gentle but effective mixing, suitable for keeping biological samples e.g. blood in suspension. SB3 is ideal for aerating cultures and general mixing applications. An integral tray catches any spillages from tubes being rotated. The optional dual holder accessory enables two tube holders to be used simultaneously.

Supplier: Cole Parmer

Range of quiet running overhead stirrers to meet all laboratory requirements.

Supplier: Cole Parmer

Large, powerful stirrer for use with vessels up to 30 litre capacity. Powerful magnetic drive with electronic feedback speed control, which accurately maintains the set speed.

Supplier: Cole Parmer

Stainless steel.

Supplier: Cole Parmer

Samples in a capillary tube with sealed end are positioned in the heating block. The heating rate is adjusted manually. The instrument will rapidly heat up at a rate of 20 °C per minute to the set melt temperature and up to a maximum temperature of 250 °C. Accurate readings to within 1 °C of the melt temperature can be achieved by using a slower heating rate of between 1 and 10 °C per minute. Samples are illuminated by a bright white LED and viewed via a magnifying lens, which can be easily cleaned.

Supplier: Cole Parmer

Electronic temperature controller for CC162 and SC162 magnetic hotplate stirrers.

Supplier: Cole Parmer

The all glass construction and silica sheathed heating element ensure exceptionally high quality pyrogen-free distillate (although distillate should be tested). Fitted with two independent thermostats to prevent overheating in the event of cooling water supply failure; one is mounted in the condenser vent tube to quickly detect water supply failure and the second is mounted inside the boiler. Either will turn off the heater if the water supply becomes too Low. The second thermostat also acts as a backup to the first for extra security. As there is no metal in contact with the water, the Distinction D4000 eliminates the risk of metal ions Leeching out into the water causing contamination to the distillate. The unit is also fitted with a Level control device that will automatically turn off the heater when the reservoir is full. This allows the still to run unattended without risk of the reservoir overflowing.

Supplier: Cole Parmer

Compact general purpose hotplate stirrers designed for safety and performance. The hotplate has an innovative LED temperature indicator scale and can also be used in conjunction with the SCT1 digital contact thermometer to accurately control sample temperature. Powerful magnets and motor give stirring speeds up to 2000 min⁻¹ and unit is capable of mixing large volumes (up to 15 litres*). Both models have an integral fitting for a retort rod.

Supplier: Cole Parmer

PTFE construction, glass ceramic plate. Separate control box (150×160×65 mm) connected via a PTFE coated lead. Ideal for digestions and metal analysis.

Supplier: Cole Parmer

Manufactured from soda glass.

Supplier: Cole Parmer

Keep your homogeniser up and running.

Supplier: Cole Parmer

Rotator, vortex mixer, blotter all in one.

Supplier: Cole Parmer

Eliminate wrist strain.

Supplier: Cole Parmer

Three independent stirring or heating/stirring positions yet only measures L×W: 600×270 mm.

Supplier: Cole Parmer

Turn an existing 15,2×15,2 cm hotplate into a heating mantle.

Supplier: Cole Parmer

Produces cold distilled water for immediate use.

Supplier: Cole Parmer

Combine with a recirculating cooler for low-temperature applications.

Supplier: Cole Parmer

Compact unit perfect for individual work stations.

Supplier: Cole Parmer

Get repeatable conditions between samples.

Supplier: Cole Parmer

Pair with Stuart rotary evaporators for maximum efficiency and smallest footprint.

Supplier: Cole Parmer

Get true temperature setting and accurate stirring control.