1182 Results for: "Bohlender"

Supplier: Bohlender

Practical collecting tray made of PE or static dissipative PE-EX. Place your waste canister in a collecting tray. Escaping liquids are collected in case of container exchange or leakages.

Supplier: Bohlender

Reusable sleevesmade of PTFE, with gripping ring and sealing rings on the outside.

Supplier: Bohlender

Red screw cap made of glass-fibre reinforced ETFE, inner parts consisting of a v-ring (ETFE), a tapered ring and a sealing ring (both PTFE) as well as an o-ring (FKM) for tubing diameters under 3 mm, (not exposed to the medium). The medium is only exposed to PTFE.

Supplier: Bohlender

PTFE-encapsulated stirring bar retrievers with extra strong permanent magnet (Neodym). For the removal of stirring bars from aggressive liquids. Especially useful for big, heavy stirring bars up to 400 g.

Supplier: Bohlender

Canister with S60/61 thread (DIN 60/61) for the collection of liquid waste with integrated indicator to monitor the level.

Supplier: Bohlender

Connector made from PP with elastic sealing lip and FPM O-ring

Supplier: Bohlender

Bellow connectors, made of PTFE, with sharp folds and sealing rings on the outside of the cone.

Supplier: Bohlender

PPS screw cap, black, distributor body made from PTFE or PFA.

Supplier: Bohlender

Black screw cap made of PPS and available with or without stopcocks. Distributor body made of PTFE with 2 or 3 ports with female thread UNF 1/4" 28 G on upper and lower sides and stopcock made of FEP for each port.

Supplier: Bohlender

Silica gel with colour indicator.

Supplier: Bohlender

PTFE tape for sealing joints and screw threads. Thickness: 0,1 mm.

Supplier: Bohlender

These POM couplings are ideal for balancing misalignment of axes between stirrer and stirrer shaft. Suitable for glass, metal or Bola stirrer shafts. Both models are suitable for rotational speeds of up to 1200 rpm and can be used for both right and left-handed rotation.

Supplier: Bohlender

PP screw cap, green, distributor body and tubing connectors made from PP

Supplier: Bohlender

Silicone with PTFE washers.

Supplier: Bohlender

Ideal for cutting plastic and rubber tubing with and without textile reinforcement.

Supplier: Bohlender

Boiling stones, made of PTFE, white, prevent chemical splashes and production of big bubbles when boiling the medium. Grain size: 4 mm. Packed in resealable bag. FDA conformity.

Supplier: Bohlender

Protection sheets made from PTFE or FEP.

Supplier: Bohlender

GL 14 and GL 18 hose connectors, made of PFA, GL 25 and GL 32 hose connectors, made of PTFE, with elastic sealing lip and FPM O-ring and nut made of PPS.

Supplier: Bohlender

This vacuum adapter is made of PTFE with O-ring made of FKM for secure placement of standard filter cartridges made of glass or plastic on vessels and round flasks with ground joint.

Supplier: Bohlender

For use as a table pad, slideway or for insulation.

Supplier: Bohlender

Safe collection of hazardous waste is an important part of the laboratory work routine. b.safe waste caps connect waste lines from your HPLC/UHPLC leak-tight with your waste container. The waste caps are available in various sizes to fit your specific waste container safely.

Supplier: Bohlender

Stirring Tools, BOLA, Replacement gasket, PTFE with FPM O-ring for shaft guides

Supplier: Bohlender

Tube fitting made of PTFE with nuts made of glass-fibre reinforced PTFE.

Supplier: Bohlender

These bearings have sealing rings to ensure a perfect seal. A special gasket made of PTFE and a FPM o-ring which is compressed by a GL screw cap ensure the stirrer shaft is sealed.

Supplier: Bohlender

PTFE.

Supplier: Bohlender

Funnel made of PE or static dissipative PE-EX for liquid waste disposal. The funnel can be safely mounted on the waste container with its freely turnable cap that is safely fixed with filling neck.

Supplier: Bohlender

GL 14 and GL 18 hose connectors made of PFA, GL 25 and GL 32 hose connectors made of PTFE with elastic sealing lip and FPM O-ring.

Supplier: Bohlender

PPS screw cap, black, distributor body made from PTFE.

Supplier: Bohlender

BOLA, Replacement blade for tubing cutter

Supplier: Bohlender

Valve body made of PP with connection (thread UNF ¼" 28G) suitable for b.safe caps. Lid with aeration opening and Luerlock connector, integrated non-return valve with upstream porous PTFE membrane (1 μm), including clip-on service life indicator.