3097 Results for: "Binder"

Supplier: Binder

Analog output 4 - 20 mA - for temperature and pressure values (output not adjustable), For: Vacuum drying chambers, VD and VDL series

Supplier: Binder

Installation and comissioning, For: For all WIC sizes

Supplier: Binder

Tubular bags, set of 12, For: Series CB

Supplier: Binder

Shelf perforated KB(W) 400

Supplier: Binder

Thanks to thermoelectric cooling technology with heat dissipation, KB ECO cooled incubators are one of the most energy efficient cooling incubators on the market. The thermoelectric cooling technology means the KB ECO series is also very quiet during operation.

Supplier: Binder

The Binder FP series of material test chambers with mechanical convection and program functions provide reliably short drying times and particularly fast heating – even for chambers under full loads.

Supplier: Binder

Multi-functional drying ovens with stainless steel chambers which are ideal for use in the pharmaceutical and chemical industries, biotechnology, medicine and universities. Ovens feature one temperature program ramp, an adjustable temperature safety device, Class 2 (DIN 12880) with visual alarm and adjustable ventilation by means of front ventilation slide and rear 50 mm Ø exhaust duct. Fast recovery times after opening the door or air change. GLP/GMP compliance is assisted by the RS422 interface and by optional APT-COM™ DataControlSystem software.

Supplier: Binder

The MFK series of dynamic climate chambers has been specially developed as precision heating and cooling chambers for complex standards-based climatic testing. The units are ideal for rapid temperature changes with humidity control with a low temperature range down to –70 °C and have a higher capacity which exceeds the capability of normal testing chambers. The stainless steel inner chamber has door heating, a heated viewing window with LED interior lighting and programmable condensation protection for the test materials.

Supplier: Binder

The VD series of vacuum drying chambers provide fast gentle drying of non flammable solvents, delivering impressive performance through their precise temperature control and gentle drying. Expansion rack technology also ensures optimal heat transfer, shelves provide flexible placement, and the interior of the chamber is easy to clean. The VDL series of safety vacuum drying chambers ensures maximum safety when drying flammable organic solvents, and have been safety tested by a state recognised test institute (GS mark). VD/VDL units can also be purchased as modular options with vacuum pump and pump chamber to form a complete system.

Supplier: Binder

Perforated stainless steel shelf, For: MK/MKF/MKT/MKFT 240

Supplier: Binder

Accessories for drying ovens with natural convection ED series, Avantgarde.Line

Supplier: Binder

With forced convection, the Avantgarde.Line heating and drying chambers offer quality and process reliability. The wide temperature range of up to 300 °C, mean these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Binder

The KB series with compressor cooling consumes up to 30% less energy compared to its predecessor. Refrigerated incubators are mainly used for culturing tasks that need to be carried out at temperatures below room temperature or if high ambient temperatures cannot be avoided. The cooling system and the controllable fan guarantee high degrees of humidity even during cooling mode, or prolonged testing, to protect samples from drying out even when fully loaded.

Supplier: Binder

Vacuum drying ovens with stainless steel inner chambers. All units have a microprocessor controller with two programs, 10 sections each or, alternatively, one program with 20 sections. The time interval of a single program section can be adjusted up to a maximum of 99,59 or 999,59 hours on all program sections. Units have an adjustable TWB Class 2 safety device with visual alarm. GLP/GMP compliance is assisted by the integral RS422 interface and optional APT-COM™ DataControlSystem software.

Supplier: Binder

RS422/RS232 interface converter

Supplier: Binder

Shelves, Stainless steel shelf, For: BF/FD/FED 115

Supplier: Binder

Factory Fitted Options for Binder FP Heating Chambers

Supplier: Binder

A powerful all-rounder among constant climate chambers: Equipped with all kinds of sophisticated technology, the KBF PRO with proven APT.line™ preheating chamber technology takes any material test in its stride – whether it takes place at -20 °C or under THB conditions at +85 °C and 85% relative humidity. Units have a stainless-steel inner chamber and temperature range of -20 to +100 °C and humidity range of 10% to 98% RH. The models offer flexible water supply options for all installation sites and consumes up to 40% less energy than its predecessor, the KMF model. Optional light modules are also available to turn the KBF PRO into a chamber for ICH photostability testing or plant growth.

Supplier: Binder

Temperature test chamber

Supplier: Binder

KMF constant climate chambers ensure constant test conditions throughout the stainless steel chamber even with a full load and only require a small amount of bench space. Units can be operated with Binder Pure Aqua Service, a flexible water purification system (optional) or deionised water. Units self-test for comprehensive status analysis.

Supplier: Binder

Calibration digital pressure display, including certificate. Measurement at specified pressure, range 20 - 900 mbar, For: VD and VDL

Supplier: Binder

Water cooling for reduced heat loss to ambient air

Supplier: Binder

Robust space-saving oven/steriliser with hydraulic mechanical thermostat and temperature setting via analogue dial indicator thermometer.

Supplier: Binder

The KBWF series plant growth chambers are precise units for plant cultivation under the most up-to-date working conditions with optimum climatic conditions. They provide perfect simulation of a wide range of growing environments, the perfect interaction between heat or cold, humidity and light. The design includes variable position daylight cassettes with five daylight luminescence tubes each. Units self-test for comprehensive status analysis.

Supplier: Binder

The CBF series CO₂ incubators are the premium series of CO₂ incubators with humidity control. Units are suitable for all sensitive incubation applications and ensure optimal cell growth in GMP environments. A CBF series CO₂ incubator can be used for complex cultivation experiments or individual environments with hypoxic conditions thanks to the comprehensive range of options and accessories. Units ensure consistent results including in cell-based assays with multiwell plates.

Supplier: Binder

These ultra-low temperature freezers ensure the safe storage of samples at –90 °C. They combine outstanding environmental friendliness with low energy consumption, convenient operation and an individual safety concept.

Supplier: Binder

The KBF series is a proven specialist for reliable ICH stability tests in the pharmaceutical industry: the KBF masters all long-term tests, accelerated tests and stress tests. It fulfills all important ICH requirements, from precision to programming and documentation. With flexible water supply options for all installation locations. The units have a stainless-steel inner chamber and proven APT.line™ preheating chamber technology, feature a temperature range of 0 to +70 °C, and humidity range of 10 to 80% RH, the KBF consumes up to 40 % less energy than its predecessor. With optional light modules, the KBF can be converted into an ICH photostability chamber and a plant growth chamber.

Supplier: Binder

Climatic chamber

Supplier: Binder

Battery test chambers from BINDER are ideal for aging, performance, and stress tests performed on lithium-ion cells and modules during quality assurance and battery production. Handling lithium-ion batteries can present a variety of potential hazards. System operators need to evaluate the level of risk and counteract it using an appropriate safety concept. The LIT MK series of temperature test chambers from BINDER provides a controllable temperature range of −40 to +110 °C. The units come with extensive safety equipment as standard so that tests on lithium-ion cells can be performed at an anticipated EUCAR hazard level of 6. To ensure maximum safety, all the chambers in the LIT MK series are fitted with detection and fire suppression equipment as standard.

Supplier: Binder

Qualification documents. Hard copy IQ/OQ documents inside folder - supporting documents for validation performed by customers, consisting of: IQ/OQ checklists includes calibration guide and comprehensive unit documentation; parameters: temperature, CO₂, O₂, pressure, depending on unit, For: UF V