"BEHR"

Supplier: BEHR

For the determination of readily liberated cyanides, the DET basic unit (DBAS, 705-0023) and the supplementary set for total cyanides (DGC, 705-0024) are also required together with the DLFC set.
The DLFC set includes the following equipment:

Supplier: BEHR

The behrotest® SMA-ARB workstation is a basic system for simultaneous aqua regia digestion of either 6 or 12 samples for heavy metals analysis.

Supplier: BEHR

Complete compact extraction system with basic rack, heating device, holder, hoses and glassware (reaction flasks, extractor, Dimroth condenser for extraction).

Supplier: BEHR

Behr equipment for Soxhlet extraction comply with the most various requirements of daily laboratory routines.

Supplier: BEHR

Steel ball clamp for KS19 with locking screw.

Supplier: BEHR

These transport containers are suitable for storage and transport of 6 or 8 DIN-sampling bottles. They are ideal for the storage of light sensitive samples. The cooling element in the lid ensures to maintain cooling inside the sample container. The insulated cladding eliminates the influences of temperature change in the samples.

Supplier: BEHR

This set includes the following equipment:
5×Sample vessels, 250 ml 65/250
5×Vessel –extractor connector M 2965
5×30 ml soxhlet extractor EZ 30
5×Reflux condenser for EZ 30 extractor RFK 30

Supplier: BEHR

The behrotest® WE 5 Five-in-a-line multiple steam generator provides the simultaneously rapid and gentle distillation of up to five samples. The discharge of steam into the samples guarantees a particularly uniform distillation and thus a high reproducibility of the recovery rates over the entire range. The complete set includes:

Supplier: BEHR

COD determination is a very important parameter for wastewater and sewage measurements. Behr workstations guarantee COD analysis in strict accordance with the following standards.

Supplier: BEHR

behr steam distillation units are not just high performance units and reliable partners in your daily laboratory routine. An essential factor in the development and design of the devices was also the safety of the user.

Supplier: BEHR

These extractors can be used to separate a substance or a group of elements from samples according to the Randall technique. It features lever assembly to raise and lower the extraction unit into/out of the heating chamber.

Supplier: BEHR

Conductivity meter with connection hoses for water deionisers B10dN, B22dN, B45dN.

Supplier: BEHR

Glass, amber, with red screw cap.

Supplier: BEHR

Petri dish made of quartz glass with ground glass edge.

Supplier: BEHR

The behrotest® SMA-ARM workstation, for simultaneous aqua regia digestion of up to six samples for heavy metals analysis, are supplied with a programmable microprocessor-controlled time/temperature controller as well as a fume manifold for drawing off the acid vapours. This results in greater convenience and functionality in routine laboratory operations.

Supplier: BEHR

Mineralisation workstation, Reaction vessel with joint N/S29 and marking at 100 ml, RG 2