Pure water systems, Milli-Q® IX 7003/05/10/15

Reliable water purification for results reproducibility and lab productivity.

Constant-quality Elix® pure water
Intuitive E-POD® dispenser (optional)
Touchscreen interface
New pure water storage solution
Elix® EDI technology lowers running costs
Mercury-free UV lamps

The Milli-Q IX pure water system provides a reliable source of high quality type 2 pure water to feed your lab's needs: From general laboratory uses, such as instrument feed or buffer preparation, to sensitive applications, such as microbiology culture media or staining solutions.

Advanced and ergonomic E-POD point of dispense (optional) gives rapid and convenient access to pressurised pure water throughout the lab.

: Manufactured in accordance to IECEE; UL listed; ASTM® D1193 (type 2 reagent water); ISO® 3696 (grade 2 water).

: A range of accessories are available to support your specific needs and environment; contact your Avantor representative for more information.

Catalog No:
172-0055
172-0061
172-0056
172-0057
172-0058
172-0059
172-0060
172-0062

Model:
Milli-Q® IX 7003
Milli-Q® IX 7015
Milli-Q® IX 7003
Milli-Q® IX 7005
Milli-Q® IX 7005
Milli-Q® IX 7010
Milli-Q® IX 7010
Milli-Q® IX 7015

Feed water:
Potable tap water
Potable tap water
Potable tap water
Potable tap water
Potable tap water
Potable tap water
Potable tap water
Potable tap water

Production flow rate:
3 L/h
15 L/h
3 L/h
5 L/h
5 L/h
10 L/h
10 L/h
15 L/h

Conductivity:
<0,2 μS/cm at 25 °C, typically 0,1 μS/cm (values are typical and may vary depending on the feed water)
<0,2 μS/cm at 25 °C, typically 0,1 μS/cm (values are typical and may vary depending on the feed water)
<0,2 μS/cm at 25 °C, typically 0,1 μS/cm (values are typical and may vary depending on the feed water)
<0,2 μS/cm at 25 °C, typically 0,1 μS/cm (values are typical and may vary depending on the feed water)
<0,2 μS/cm at 25 °C, typically 0,1 μS/cm (values are typical and may vary depending on the feed water)
<0,2 μS/cm at 25 °C, typically 0,1 μS/cm (values are typical and may vary depending on the feed water)
<0,2 μS/cm at 25 °C, typically 0,1 μS/cm (values are typical and may vary depending on the feed water)
<0,2 μS/cm at 25 °C, typically 0,1 μS/cm (values are typical and may vary depending on the feed water)

TOC content:
≤30 ppb (values are typical and may vary depending on the feed water)
≤30 ppb (values are typical and may vary depending on the feed water)
≤30 ppb (values are typical and may vary depending on the feed water)
≤30 ppb (values are typical and may vary depending on the feed water)
≤30 ppb (values are typical and may vary depending on the feed water)
≤30 ppb (values are typical and may vary depending on the feed water)
≤30 ppb (values are typical and may vary depending on the feed water)
≤30 ppb (values are typical and may vary depending on the feed water)

Resistivity at +25 °C:
>5 MΩ.cm, 10 - 15 MΩ.cm (typical) [resistivity can also be displayed non temperature compensated as required by USP]
>5 MΩ.cm, 10 - 15 MΩ.cm (typical) [resistivity can also be displayed non temperature compensated as required by USP]
>5 MΩ.cm, 10 - 15 MΩ.cm (typical) [resistivity can also be displayed non temperature compensated as required by USP]
>5 MΩ.cm, 10 - 15 MΩ.cm (typical) [resistivity can also be displayed non temperature compensated as required by USP]
>5 MΩ.cm, 10 - 15 MΩ.cm (typical) [resistivity can also be displayed non temperature compensated as required by USP]
>5 MΩ.cm, 10 - 15 MΩ.cm (typical) [resistivity can also be displayed non temperature compensated as required by USP]
>5 MΩ.cm, 10 - 15 MΩ.cm (typical) [resistivity can also be displayed non temperature compensated as required by USP]
>5 MΩ.cm, 10 - 15 MΩ.cm (typical)

Bacteria:
≤10 cfu/L [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters or Biopak® polisher when installed and used in a laminar flow hood)
≤10 cfu/L [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters or Biopak® polisher when installed and used in a laminar flow hood)
≤10 cfu/L [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters or Biopak® polisher when installed and used in a laminar flow hood)
≤10 cfu/L [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters or Biopak® polisher when installed and used in a laminar flow hood)
≤10 cfu/L [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters or Biopak® polisher when installed and used in a laminar flow hood)
≤10 cfu/L [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters or Biopak® polisher when installed and used in a laminar flow hood)
≤10 cfu/L [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters or Biopak® polisher when installed and used in a laminar flow hood)
≤10 cfu/L [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters or Biopak® polisher when installed and used in a laminar flow hood)

Particles:
No particulates with size >0,22 µm [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters)
No particulates with size >0,22 µm [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters)
No particulates with size >0,22 µm [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters)
No particulates with size >0,22 µm [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters)
No particulates with size >0,22 µm [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters)
No particulates with size >0,22 µm [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters)
No particulates with size >0,22 µm [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters)
No particulates with size >0,22 µm [from an E-POD® dispenser with final filter] (with Millipak® or Millipak® Gold filters)

Endotoxin:
<0,001 EU/ml [from an E-POD® dispenser with final filter] (with Biopak® polisher when installed and used in a laminar flow hood)
<0,001 EU/ml [from an E-POD® dispenser with final filter] (with Biopak® polisher when installed and used in a laminar flow hood)
<0,001 EU/ml [from an E-POD® dispenser with final filter] (with Biopak® polisher when installed and used in a laminar flow hood)
<0,001 EU/ml [from an E-POD® dispenser with final filter] (with Biopak® polisher when installed and used in a laminar flow hood)
<0,001 EU/ml [from an E-POD® dispenser with final filter] (with Biopak® polisher when installed and used in a laminar flow hood)
<0,001 EU/ml [from an E-POD® dispenser with final filter] (with Biopak® polisher when installed and used in a laminar flow hood)
<0,001 EU/ml [from an E-POD® dispenser with final filter] (with Biopak® polisher when installed and used in a laminar flow hood)
<0,001 EU/ml [from an E-POD® dispenser with final filter] (with Biopak® polisher when installed and used in a laminar flow hood)