Supplier: Hach

AL-36B can measure acidity, alkalinity, carbon dioxide (1,25 to 100 mg/L), dissolved oxygen (0,2 to 20 mg/L), hardness and pH (4 to 10).

Supplier: Hach

Pre-dosed reagents for maximum safety.

Supplier: MACHEREY-NAGEL

The VISOCOLOR® testkits are devided into VISOCOLOR® alpha, ECO and HE. Every product range offering its specific strenght to provide a tailored test for each and every user and application.

Supplier: Hach

Designed to analyse tannin and lignin together and report result as mg/l tannic acid.

Supplier: Hach

Pre-dosed reagents for maximum safety.

Supplier: MACHEREY-NAGEL

Saltesmo test discs are frequently used for the determination of salt (NaCl) in foodstuffs and in sea water. All reagents are impregnated on the paper, making the test very easy to use even for untrained persons.

Supplier: Lovibond

Test kit, Sulphide No1 tablet, Range: 0 – 0,5 mg/l S, For unit: MD600, MD610, MultiDirect and Spectrodirect

Supplier: Hach

This kit is used for controlling boiler and cooling water treatment and checking corrosion using the drop count test which is a simple volumetric/ titration method with colour indication. It is an economical solution for the operation of modern boilers and cooling towers.

Supplier: Lovibond

CHECKIT® Comparator is a compact and handy colorimetric unit which is suitable for both mobile and static analysis work. Supplied with a generous number of different colour scales, it provides the basis for a comprehensive, easy-to use colorimetric analysis system.

Supplier: MACHEREY-NAGEL

These test strips are for the fast and reliable determination of Ammonium, respectively Ammonia, in solutions. The easy dip-and-read procedure provides safe results within 40 seconds. Ammonium/Ammonia is harmful to fish and other aquatic life in aquariums. This test shows the amount of Ammonium quickly and easily.

Supplier: MACHEREY-NAGEL

These Ozone test strips are designed for quick, convenient and reliable on-site Ozone testing. The easy procedure yields accurate testing results within ten minutes.

Supplier: Lovibond

The speed test is based on reverse titration. After adding a reagent tablet to a calibrated test tube, the water sample is added slowly until the colour of the solution changes (e.g. from red to blue). The user can then obtain the result from the liquid level.

Supplier: Hach

Molybdates are used to inhibit corrosion in industrial and utility water systems. The reagents in the kit reacts with molybdate to form a blue colour, which is measured with a colour disc.

Supplier: Hach

Maintaining good water quality is essential and this kit utilizes drop count titration and color disc methods to deliver the fast, accurate results. Allows measurement of ten critical freshwater parameters using accurate Digital Titrator titration and continuous colour disc colorimetry.

Supplier: Hach

This chlorine reagent set has 100 tests each to test chlorine (free and total) by DPD colorimetic method.

Supplier: Hach

Tests for all water analysis applications. The cuvette is a closed sytem which is safe for the user and the environment. Suitable for the laboratory robot.

Supplier: MACHEREY-NAGEL

A pre-dosed NANOCOLOR® tube test for photometric determination of zinc in water.

Supplier: MACHEREY-NAGEL

This test paper allows the specific detection of lactoperoxidase in milk. In the dairy industry the test is used for the quick and easy quality control of highly heated milk. In contrast to the alternative guaiacol method, Peroxtesmo MI is odourless and non-toxic.

Supplier: MACHEREY-NAGEL

The VISOCOLOR® testkits are devided into VISOCOLOR® alpha, ECO and HE. Every product range offering its specific strenght to provide a tailored test for each and every user and application.

Supplier: MACHEREY-NAGEL

Semi-quantitative test strips for reliable determination of iron concentrations as low as 0.05 mg/L (ppm). A hole in the plastic carrier allows the water to migrate through the test pad increasing the sensitivity by a factor of nearly 10. Ideal for rapid and easy analysis of iron directly on-site. No maintenance or calibration is required.

Supplier: MACHEREY-NAGEL

The test paper allows the sensitive and specific detection of Fe(II) ions. Even small amounts of Fe(II) can safely be detected in presence of large amounts of Fe(III).

Supplier: MACHEREY-NAGEL

This test paper allows the quick and easy detection of Cobalt (Co²⁺). For non-destructive testing of materials apply a drop of acid solution (50 ml hydrogen peroxide 3% + 7,5 ml O-phosphoric acid 85% + 5 ml hydrochloric acid 37 %) to the degreased surface.

Supplier: Hach

Pre-dosed reagents for maximum safety.

Supplier: Lovibond

Test kit, Hydrazine test powder, Range: 0,05 – 0,5 mg/l N₂H₄, For unit: MD100 boiler water, MD610

Supplier: Hach

This ready-to-use, high-precision pre-dosed cuvette kit tests for the presence of vicinal diketones (VDK) with less hassle and no chemical waste. It also simplifies brewing analysis, with accurate results, every time.

Supplier: Hach

For the photometric determination of adsorbable organic halogens.

Supplier: MACHEREY-NAGEL

The VISOCOLOR® testkits are devided into VISOCOLOR® alpha, ECO and HE. Every product range offering its specific strenght to provide a tailored test for each and every user and application.

Supplier: MACHEREY-NAGEL

A pre-dosed NANOCOLOR® tube test for photometric determination of chromate in water.

Supplier: MACHEREY-NAGEL

A pre-dosed NANOCOLOR tube test for photometric determination of chlorine in water.

Supplier: Lovibond

Lovibond® offers a wide range of single parameter Drop Test Kits forindividual test requirements. They are for use in various water testing applications including potable water, process water, industrial boilers and cooling systems, swimming sool and waste water treatment.