You searched for: Fittings and Connectors

Supplier: EDWARDS HIGH VACUUM METTLER

Blanking flanges made of aluminium or stainless steel.

Supplier: EDWARDS HIGH VACUUM METTLER

Cross pieces made of aluminium or stainless steel.

Supplier: HWS LABORTECHNIK

Metal adapter with PT 100, for flexible metallic tubing.

Supplier: Restek

Graphite two-piece construction. For Shimadzu 17A, 2010, and 2014 GCs.

Supplier: Agilent

These fittings for Shimadzu HPLC systems provide leak-free connections and prevent the loss of peak shape and resolution.

Supplier: Restek

These are used to cap off a detector and prevent hydrogen from accidentally diffusing into the oven from an unused detector base.

Supplier: Restek

This conversion fitting is a flat, soft aluminum sealing ring deforms and butt-seals against the MSD interface. A standard Vespel® ferrule seals the column and 1,59 mm stainless steel nut.

Supplier: Restek

Replacement nut, 0,8 mm

Supplier: Restek

These ferrules are made of aluminium eliminate out-gassing and make leak-tight seals for less detector noise. Its unique two-piece design permanently locks on fused silica tubing without causing breakage.

Supplier: VARIAN

Ferrule, 0,32 mm to 0,25 mm ID, 15% graphite/85% Vespel®

Supplier: Restek

Fused silica adapter ferrules are made from valcon polyimide, a unique graphite reinforced composite that is specially made to maximise mechanical stability at temperatures up to 350 °C.

Supplier: SEMADENI

Tubing connectors, made of PP. Dimensions are shown as both nominal and exact as elasticity of tubing will influence the choice of size. Use our tubing selector 229-0111 to determine "grip". This will then give equivalent crest dimension for the particular connector concerned.

Supplier: EDWARDS HIGH VACUUM METTLER

Elbows 90°, DN 40 mm, Aluminium

Supplier: EDWARDS HIGH VACUUM METTLER

Reducing pieces made of aluminium.

Supplier: Restek

Secure-Fit provides a good connection between HPLC components for trouble-free chromatography.

Supplier: Restek

These Luer lock valve adaptors are suitable for connecting a Luer lock fitting to a Rheodyne or Valco valve.

Supplier: Restek

This capillary inlet adaptor fitting kit is ideal for split/splitless fitting for capillary columns.

Supplier: VARIAN

PEEK fittings resists pressure up to 5000 psi and temperature of 100 °C.

Supplier: Agilent

InfinityLab Quick Connect fittings are 'finger-tight' reusable fittings for UHPLC, stable to 1300 bar.

Supplier: VARIAN

Bond Elut adapters fit on top of any Bond Elut cartridge and contain a female Luer fitting that accommodates the tip of another cartridge.

Supplier: Restek

GRAPHPACK® technology provides a complete system that quickly and reliably makes a leak-tight, low-dead-volume connection.

Supplier: Restek

These non-reusable column caps increase column lifetime, prevent moisture and air from entering the column during storage.

Supplier: Restek

These septum nuts are made of high-quality stainless steel and for use with Agilent 5890/6850/6890/7890 split or splitless injectors.

Supplier: Agilent

Agilent adapters are equivalent to the PerkinElmer FIMS/FIAS versions, so you can be confident that they will integrate seamlessly with your PerkinElmer AA system.

Supplier: Agilent

1/8" (A)×1/4" (B) brass connector, Brass

Supplier: PIEPER FILTER

PP, transparent.

Supplier: Restek

Double connectors are used to effectively connect any click-on trap to a click-on indicator.

Supplier: KOHLER

Tubing connectors connect fluid carrying lines reliably. Can be used in motor vehicles as well as in every industrial application.

Supplier: HWS LABORTECHNIK

Metal adapter, M 16×1 thread, with A execution, Metal

Supplier: Restek

Injector nut kit for Shimadzu 17A, 2010, and 2014 GCs.