You searched for: Stirrers

Supplier: SCIENTIFIC INDUSTRIES ELMIS

Programmable magnetic stirrer with wide range of applications including stirring of cell cultures and viscous solutions.

Supplier: THERMO H + P LABORTECHNIK

Magnetic stirrer with pre-selectable power settings, which optimise stirring efficiency for different liquid volumes and minimise heat output.

Supplier: SCIENTIFIC INDUSTRIES ELMIS

The programmable revolutionary 4-position MultiMagStir Genie provides low to high speed stirring and editable memory profiles.

Supplier: BOCHEM

Radial stirrer made of stainless steel.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the two paddles arranged crosswise at 90° completely made of PTFE.

Supplier: Heidolph Instruments GmbH & Co.KG

The magnetic stirrer Hei-PLATE Mix 'n' Heat Expert convinces with its intuitive handling. You have an easily legible eye on all values and settings at any time.

Supplier: Heidolph Instruments GmbH & Co.KG

Hei-PLATE Sensor Advanced Package Core.

Supplier: Thermo Fisher Scientific

These slow speed stirrers with precise stirring control have a strong magnetic coupling. The raised display design protects the electronics from any liquid spills and units are available with a choice of ceramic or aluminium top plates.

Supplier: Heidolph Instruments GmbH & Co.KG

Chucks are designed for use with all RZR series overhead electronic stirrers.

Supplier: BOCHEM

Propeller stirrer made of stainless steel with two fixed paddles.

Supplier: RSG

Overhead stirrer shaft, Stirring Shaft, Ø: 8 mm, Length: 320 mm

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the propeller completely made of PTFE.

Supplier: THERMO H + P LABORTECHNIK

Multi-position stirrers with direct control for up to 15 vessels, are ideal for general laboratory and mass screening applications. Units provide smooth stirring even at low speeds and are suitable for use with 15×250 ml beakers or 6×1 litre flasks.

Supplier: Cole Parmer

Strong stirring and precise heating for large-volume requirements.

Supplier: SCIENTIFIC INDUSTRIES ELMIS

MegaMag Genie® is a powerful magnetic stirrer with LCD display and configurable speed. Units have been designed to safely and reliably mix liquid volumes up to 38 litres using magnetic stirring bars. The rugged ABS/Polycarbonate housing is made with an engineering grade thermoplastic resin.

Supplier: Heidolph Instruments GmbH & Co.KG

Made from stainless steel.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the propeller with four blades completely made of PTFE.

Supplier: THERMO H + P LABORTECHNIK

Magnetic stirrer with compact, durable design. Unit has a powerful, far-reaching magnetic field, which enables efficient stirring, even when there is some distance between stirrer and stirring bar.

Supplier: Heidolph Instruments GmbH & Co.KG

Hei-PLATE sensor Basic and Advanced package Expert.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel with fused lower end.

Supplier: Bohlender

These bearings have sealing rings to ensure a perfect seal. A special gasket made of PTFE and a FPM o-ring which is compressed by a GL screw cap ensure the stirrer shaft is sealed.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the propeller completely made of PTFE.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel with the blade made completely of PTFE.

Supplier: Bohlender

Micro stirrer shafts made of PTFE-jacketed stainless steel with blade made completely of PTFE. With four round paddles.

Supplier: Bohlender

These POM couplings are ideal for balancing misalignment of axes between stirrer and stirrer shaft. Suitable for glass, metal or Bola stirrer shafts. Both models are suitable for rotational speeds of up to 1200 rpm and can be used for both right and left-handed rotation.

Supplier: KARTELL

Fit all standard button tip stirring shafts. 'Long groove' keyhole (Ø 9 mm) provides easy insertion into flask neck and proper position for stirring action. Can be used continuously at temperatures up to 250 °C and, for short intervals, to 300 °C.

Supplier: THERMO H + P LABORTECHNIK

Compact magnetic stirrers with VARIOMAG drive, hermetically sealed in resistant stainless steel housing (except MINI units which are plastic), making these stirrers ideal for use directly in water baths. MINI stirrers are ideal for integration in analytical instruments, cuvette holders or photometers due to their size, however these plastic units are not designed for use directly in baths. There are units with up to 60 stirring positions in this range, and a choice of three external control units. The TELEMODUL 7 has one power setting, the TELEMODUL 20 C has four power settings: 25%; 50%; 75% and 100% and can store three programmes, the TELEMODUL 40 C features ten different power settings from 10 to 100% and a RS232 interface.

Supplier: Cole-Parmer

Use the Integrity 10 reaction station to run ten independent experiments at once. By setting the temperature and stir rate individually for each cell users can assess the impact of both at the same time, speeding up investigative chemistry by ten-fold.

Supplier: THERMO H + P LABORTECHNIK

Simplify operations with the Thermo Scientific™ Cimarec™ i 20C Controller, a user-friendly, menu-driven microprocessor controller that is included with the Micro, Mini, Compact, Maxi and Telesystems stirrers.

Supplier: Thermo Fisher Scientific

Basic hotplate is equipped with hot top warning and built in over temperature shut-off to provide accurate heating of samples and safety to the laboratory. Aluminum top provides excellent temperature uniformity while the thin ceramic coating provides excellent corrosion resistance and a white surface for optimal sample viewing.