Samplers
Accurately determine air, water, and soil composition with our array of samplers, all designed to maintain sample integrity in a variety of conditions. A wide variety of models are available for various specialized tasks, including testing water clarity, soil density and composition, and volumes of different components in the atmosphere. These high-quality samplers are suitable for even the harshest of conditions and are designed for user comfort even after hours of continuous use.
Sample lance
Supplier: BURKLE
Samplers for viscous, paste-like and semi-liquid substances.
Expand 2 Items
Sampler, Chemo-Sampler
Supplier: BURKLE
The sample is directly extracted into the original sample bottle with screw cap.
Expand 1 Items
Sampling pot, Liquid CupSampler
Supplier: BURKLE
Liquid CupSampler collects liquids of varying viscosity. Media containing particles can also be sampled without difficulty.
Expand 1 Items
Sampler with suction lance, UniSampler
Supplier: BURKLE
The collection lance consists of an inner tube and an outer tube. The suction position can be varied steplessly with the outer tube within a height of 0 to 48 cm.
Expand 1 Items
VWR®, Sample Dippers
Supplier: VWR Collection
These sample dippers feature a basic container with a screw-in PTFE encapsulated steel shaft.
Expand 5 Items
VWR®, Sample Dippers
Supplier: VWR Collection
All sample dippers are made of blue PP and consist of a bottle with snap handle.
Expand 4 Items
VWR® SAS Super DUO 360 Air Samplers
Supplier: VWR Collection
When environmental contamination is very low, and the number of samples to be performed is high, operational duration can be an important factor in the choice of SAS instrument. Two sampling heads that operate simultaneously to sample 1000 litres of air, in less than 3 minutes, is the solution.
Expand 2 Items
VWR® SAS Super Pinocchio CR Air Sampler for Compressed Gas
Supplier: VWR Collection
SAS Super Pinocchio CR is a compact microbial impaction sampler designed to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and a flow meter to regulate and achieve the required flow rate.
Expand 5 Items
VWR® SAS Super ISO Air Samplers
Supplier: VWR Collection
SAS Super ISO 100 and SAS Super ISO 180 are differentiated by their airflow; this choice depends on the application, and allows continuous or sequential sampling from a few minutes to several hours. The data can be stored on the SAS instrument itself or on any remote PC.
Expand 4 Items
Air sampler, Coriolis®
Supplier: Bertin Instruments
Coriolis® μ is a portable biological air sampler for indoor or outdoor air bio-contamination monitoring. The equipment concentrates airborne particles in a liquid sample that can be analysed afterwards using microbiological techniques.
Expand 1 Items
All-layer scratcher
Supplier: BURKLE
The scratcher is designed for powders and granules that do not flow freely.
Expand 1 Items
Disposable samplers, MultiDispo
Supplier: BURKLE
This MultiDispo zone samplers for taking samples from multiple layers of the sample material.
Expand 4 Items
Powder samplers, PharmaPicker
Supplier: BURKLE
PharmaPicker is designed for sampling very small quantities of highly potent or active powders for analysis. The smallest sample quantities can be collected with the PharmaPicker.
Expand 3 Items
Dipping bottle with glass container
Supplier: BURKLE
Dipping bottle with glass container for sampling in sewage plants, for mud and water samples. For testing crude oil, liquid mineral oil products, fuels, special and test fuels, fuel oils, petroleum and liquid lubricants of Hazard Categories IIA and IIB. Completely made from non spark-producing materials. Dipping frame made of nickel plated brass, Easy-Click closure made of electrically conductive polyamide.
Expand 1 Items
Bürkle Dip Samplers with Plunging Siphon
Supplier: Avantor Fluid Handling
Simple and safe removal of liquid samples.
Expand 2 Items
Sampler, UniSampler 'Ex'
Supplier: BURKLE
Glass bottle and hose are connected in such a way that they conduct electricity and are grounded via a grounding cable. Operation: Ground the device, immerse the suction hose to the required depth, attach the adapter to the sampling bottle, generate a vacuum with the manual pump and collect the sample, remove the filled sampling bottle, close it and label it.
Expand 1 Items
Recommendations will be personalized based on your shopping preferences only if you have given your consent by enabling "Enhance my Shopping Experience" on the "Personal Info page".
Otherwise, you will receive generic recommendations.



