Samplers

Supplier: VWR Collection

The SAS Super IAQ provides the same efficiency as recorded by sampling tests conducted by Centre for Applied Microbiology & Research (CAMR-UK).

Supplier: VWR Collection

Multi-sectored samplers for sampling powders, pellets and friable materials, which may become non homogeneous in bags at various levels. The models with separate sections are mainly used for chemical or physical analysis; models with communicating sections are used for microbiological analysis.

Supplier: VWR Collection

Piston sampler, made from chromium plated brass, sterilisable. The end of the tube is sharp for puncturing boxes, bales or bags containing soft pasty material.

Supplier: VWR Collection

Cylindrical probe for the proper sampling of frozen products packed in bulk - to be used with electrical drill - suitable for collecting frozen goods. Ideal to use in the food industry and for health authorities. Method of use: Probe is fixed to an electric drill. The drill is activated and then pushed against the frozen surface to be sampled. The sampling is made easy by the anti-clockwise rotation of the drill. The 'carrot' is extracted from the probe with a rod and pushed into the sampling container. All these operations are aseptically performed in case of microbiological analysis.

Supplier: VWR Collection

SAS Super Pinocchio II is a microbial impaction sampler to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and the flow meter regulated to achieve the required flow rate.

Supplier: VWR Collection

Cylindrical probe for aseptic sampling of ice cream and similar products. The probe is completed with a special PYREX® test tube for transport of the sample to the laboratory for the food industry, also ice cream producers and health authorities.

Supplier: VWR Collection

These sample dippers feature a basic container with a screw-in PTFE encapsulated steel shaft.

Supplier: BURKLE

Liquid samplers for aggressive liquids, with fixed rod.

Supplier: BURKLE

This ViscoDispo sampler is for highly viscous media up to 100 000 cP. The ergonomically shaped handle and stable drawbar make the sample easier to draw.

Supplier: BURKLE

Stainless steel construction. Developed for sampling milk powder. The collector is inserted into bags or casks and the sample is removed using a half-shell shaped lance. Insertion depth 385 mm, total length 480 mm, ext.Ø approximately 28 mm.

Supplier: BURKLE

These disposable samplers for the highest standards do not need to be cleaned after use.

Supplier: BURKLE

These core samplers can be used to take samples of bulk materials, which can easily become stuck or settle during sampling due to their particle form.

Supplier: BURKLE

Pigment lance to sample pigments, pastes and agglomerating bulk goods.

Supplier: BURKLE

Samplers for viscous, paste-like and semi-liquid substances.

Supplier: BURKLE

The collection lance consists of an inner tube and an outer tube. The suction position can be varied steplessly with the outer tube within a height of 0 to 48 cm.

Supplier: Hach

These lightweight samplers with low power requirements (12 VDC) have been designed for easy mobility.