You searched for: Closures
Whether protecting the sample from outside contamination or the workplace from the bottled toxic waste, closures guarantee tight and reliable seals. With a vast cap selection for best compatibility with any container, tailoring to specific contents is possible. Temperature resistant models allow any procedure to be completed safely. Available in different finishes, any sensitive chromatography sample is protected. The caps are easy to close with one hand and come in many colors to assist with identification.
Screw caps for glass bottles, WHEATON®
Supplier: DWK Life Sciences
Solid top screw caps made of PP with liners. White polypropylene screw cap provides clear surface for writing on cap.
Expand 55 Items
Flexible distributor for bottles, BOLA
Supplier: Bohlender
PP screw cap, blue, distributor body and tubing connectors made from PP
Expand 1 Items
Screw caps with 13 mm septa
Supplier: Agilent
CrossLab, Chromatography vial closure, Ø: 13 mm, Type: Black, open top, Septum: -
Expand 1 Items
Screw caps with 13 mm septa
Supplier: Agilent
Chromatography vial closure, Ø: 13 mm, Type: Black, open top, Septum: -
Expand 3 Items
Screw caps for certified screw top vials
Supplier: Agilent
Chromatography vial closure, PP, Ø: 9 mm, Type: Purple, certified, Septum: PTFE/silicone
Expand 35 Items
Crimp caps with 11 mm septa
Supplier: Agilent
Chromatography vial closure, Aluminium, Ø: 11 mm, Type: Silver aluminium, Septum: Rubber
Expand 21 Items
Crimp seals with septa for 2 ml crimp top vials
Supplier: Restek
Chromatography vial closure, Aluminium, Ø: 11 mm, Type: Aluminum, mixed, Septum: PTFE/silicone
Expand 23 Items
Screw cap for 22 mm vials
Supplier: Agilent
Chromatography vial closure, Screw cap, black, without septa, For: 10 ml vials, Septum: -
Expand 1 Items
Screw caps with 8 mm septa
Supplier: Agilent
CrossLab, Chromatography vial closure, Ø: 8 mm, Type: Orange, flanged, Septum: -
Expand 17 Items
Snap ring cap, PP, 11 mm, with septa
Supplier: Restek
Chromatography vial closure, Snap ring cap, with liner, Septum: PTFE, Thickness: 11 mm
Expand 6 Items
Screw caps for digestion tubes, DigiTUBE®
Supplier: PerkinElmer
Screw cap, clear, for DigiTube®
Expand 6 Items
Caps for microcentrifuge tubes with thread
Supplier: Simport Scientific
Screw caps with O-ring seal and loop, PP, Colour: Green
Expand 45 Items
Headspace screw caps with 18 mm septa
Supplier: Agilent
Fits PerkinElmer and other headspace autosamplers.
Expand 4 Items
Caps and septa for big mouth step vials
Supplier: Restek
Chromatography vial closure, Caps and septa, preassembled, Septum: PTFE/silicone/PTFE, 1,0 mm
Expand 2 Items
Aluminum seals with septa, 20 mm
Supplier: Restek
Chromatography vial closure, Aluminium, Ø: 20 mm, Type: Aluminium, preassembled, Septum: PTFE/silicone
Expand 8 Items
Screw caps with aperture, BOLA
Supplier: Bohlender
Screw caps, made of PP, with handy knurl.
Expand 1 Items
Screw caps for scintillation vials, WHEATON®
Supplier: DWK Life Sciences
White polypropylene construction.
Expand 9 Items
Screw caps bottles, wide neck, Corning® Gosselin™
Supplier: Corning
Screw cap made of HDPE.
Expand 5 Items
Headspace crimp caps with septa
Supplier: Agilent
CrossLab, Chromatography vial closure, Ø: 20 mm, Type: Bimetal, magnetic, Septum: PTFE/silicone
Expand 4 Items
Closures for cell counter vials
Supplier: RATIOLAB
Chromatography vial closure, Lids for 25 ml cell counter vials, PE
Expand 1 Items
Dispensing closures for bottles
Supplier: MURRAY S
Dispensing closure for bottles, with flip-up spout, LDPE, aperture 2 mm, LDPE, Thread: 22 mm R6, For bottles: 60/125/175 and 250 ml, Colour: White
Expand 1 Items
SafetyWasteCaps
Supplier: S.C.A.T.
The SCAT SafetyWasteCaps provide maximum safety for your HPLC liquid disposal. Safely dispose of your liquid laboratory waste without contaminating the ambient air by using SafetyWasteCaps with integrated exhaust air filters. These high-performance filters regulate the air pressure balance and prevent the escape of vapors due to the resulting overpressure in the disposal container. The variety of closures, connections and thread sizes allows optimal adaptation to your HPLC situation. Additional versions with grounding connections, level controls or safety funnels or offer every convenience for safe disposal.
Expand 69 Items
Control Waste Cap DLC, b.safe
Supplier: Bohlender
To avoid spill over of canisters through the connection of a b.safe Control Waste Cap to a b.safe Display for electronic level control.
Expand 3 Items
System waste caps capacitive, b.safe
Supplier: Bohlender
To avoid spill over of canisters through the connection of a waste cap capacitive to a b.safe Display for electronic level control. With the use of b.safe waste tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.
Expand 1 Items
System caps GL 45, b.safe
Supplier: Bohlender
Screw cap made of PPS for free movable GL 45 thread, insert made of PTFE. With PFA fittings for capillaries with Ext.Ø 1,6/2,2/3,2 mm (thread UNF ¼"), hose connector for tubings Int.Ø 6,5 to 8 mm (thread NPT ¹/₈"). Adapted to the installation on b.safe Desktop Mounts GL 45 or b.safe Multiports GL 45.
Expand 7 Items
Blind cap for waste pipes, b.safe
Supplier: Bohlender
Cap made of PE-EX with pressed-in conical sealing plate made of static-dissipative PTFE-EX.
Expand 1 Items
Poly crimp seal caps, 11 mm
Supplier: Restek
The Poly Crimp seal is versatile, working as either a snap-on or crimp-top cap. The standard crimping tool can be used to secure the Poly Crimp seal onto any crimp-top vial.
Expand 11 Items
Headspace screw cap with 18 mm septa
Supplier: Agilent
Chromatography vial closure, Aluminium, Ø: 18 mm, Screw top cap with septa, CombiPAL, Type: Silver, magnetic, For: Screw top vials, Septum: White PTFE/blue silicone
Expand 1 Items
Plug closure for culture tubes
Supplier: Thermo Fisher Scientific
Plug closures for 5 ml 12×75 mm culture tubes