You searched for: Electrodes

Supplier: Mettler - Toledo

pH electrodes with S7, BNC or MultiPin™ (pH/temperature) connector.

Supplier: Hach

Robust digital puncture pH electrode with stainless steel body, Ag/AgCl reference system and built-in temperature sensor.

Supplier: Mettler - Toledo

Robust and cost-effective electrodes, simple to operate.

Supplier: Mettler - Toledo

pH electrode with glass body and S7 screw head. Recommended for applications where the life time of the pH electrode is significantly shorter than the reference electrode.

Supplier: Thermo Orion

These chloride electrodes are designed for measuring free chloride in the range of 1×10⁻⁵ to 1 M.

Supplier: SI Analytics

pH electrodes with glass body.

Supplier: SI Analytics

Electrodes with plug head (without cable) or with BNC/DIN plug with fixed cable.

Supplier: SI Analytics

When digital IDS sensors are connected to the measuring device, they automatically identify themselves with their serial numbers and type designation and transmit their calibration data to the device.

Supplier: Thermo Orion

This fluoroborate half-cell can be easily and economically rejuvenated.

Supplier: Hach

sensION+ 9655 is a half-cell (reference not integrated) fluoride ion selective electrode with an epoxy body and non-replaceable crystalline membrane selective to fluoride ions in solution.

Supplier: Hach

sensION+ 5059 is a combination multi-parameter electrode for determination of pH, conductivity and temperature. It has a plastic body, non-refillable gel reference electrolyte and built-in temperature sensor.

Supplier: HAMILTON BONADUZ

Polyplast electrodes have a shatterproof plastic shaft. They are ideal for portable measurements or as entry level sensors for basic laboratory applications.

Supplier: Hach

3-in-1 laboratory combination pH electrodes with built-in temperature sensor.

Supplier: SI Analytics

Single electrodes with plug head and Silamid® reference system.

Supplier: Thermo Orion

This half-cell electrode is ideal for performing quick, accurate and economical measurements of thiocyanate ions in aqueous solutions.

Supplier: SI Analytics

These low-maintenance electrodes are ideal for measuring in drinking water, industrial water and sewage range.

Supplier: Thermo Orion

These fluoride electrodes are designed for measuring free fluoride ions in aqueous solutions quickly, simply, accurately and economically.

Supplier: Hach

IntelliCAL™ ISENO3181 is a digital combination nitrate ion selective electrode (ISE) with a non refillable, double junction reference and built-in temperature sensor. The solid-state sensor design eliminates membrane replacement and allows for dry storage of the ISE.

Supplier: Hach

IntelliCAL™ ISEF121 is a digital combination fluoride ion selective electrode (ISE) with a non-refillable, single junction reference and built-in temperature sensor. The solid-state sensor design eliminates membrane replacement and allows for dry storage of the ISE.

Supplier: Hach

sensION+ 9650 is a half-cell sodium ion selective electrode (ISE) with glass body and glass membrane selective to sodium ions in solution. It is recommended for use with the sensION+ 5044 reference electrode.

Supplier: HAMILTON BONADUZ

Electrodes for special laboratory applications such as microbiological samples, serum, flat surfaces, small volumes, and samples containing fats and proteins.

Supplier: HAMILTON BONADUZ

These robust combination pH electrodes are suitable for general laboratory applications, especially for measurements in emulsions and suspensions.

Supplier: Thermo Orion

These nitrate electrodes are designed for measuring nitrate in aqueous solutions quickly, simply, accurately and economically.

Supplier: Hach

The XR110 reference electrode has a glass body, red rod Ag/AgCl reference technology system, refillable electrolyte (KCl 3 M), ground joint, and porous pin junction.

Supplier: Mettler - Toledo

Reference electrodes with S7 connector.

Supplier: SI Analytics

Electrode, pH, L 1181 HD, pH: 0 - 12, −30...+80 °C, Glass, Diaphr.: -, Electrolyte: -, Ø×L: 12×120 mm, Screw plug head

Supplier: Hach

IntelliCAL™ ISENH4181 is a digital combination ammonium ion selective electrode (ISE) with a non refillable double junction reference and built-in temperature sensor. The solid-state sensor design eliminates membrane replacement and allows for dry storage of the ISE.

Supplier: Mettler - Toledo

High performance electrodes combining robustness with state-of-the-art measurement technology. Fully traceable.

Supplier: Hach

sensION+ 5057 is a combination platinum ORP electrode with a glass body and refillable liquid-electrolyte reference. It is dedicated for use with Hach sensION+ labpratory pH (mV) meters.

Supplier: Thermo Orion

These electrodes perform quick, simple, accurate and economical measurements of silver and sulfide ions in aqueous solutions. Ideal for performing low-level cyanide and halide titrations.