You searched for: Electrodes

Supplier: Mettler - Toledo

This gas-sensing electrode is intended for reliably measuring the ammonia content (NH₃).

Supplier: Thermo Orion

These calcium electrodes are designed for measuring calcium in aqueous solutions simply, accurately and economically.

Supplier: Thermo Orion

These electrodes are designed for measuring lead ions in aqueous solutions quickly, simply, accurately and economically.

Supplier: Mettler - Toledo

A variety of pH electrodes for use in different applications.

Supplier: Thermo Orion

This standard gas-sensing ISE electrode is designed for quick, reliable and accurate measurements of dissolved ammonia in aqueous solutions.

Supplier: Hach

IntelliCAL™ ISENA381 is a digital combination sodium ion selective electrode (ISE) with a refillable double junction reference and built-in temperature sensor. The probe is intended for laboratory use.

Supplier: Mettler - Toledo

pH electrodes with MultiPin™ connector.

Supplier: SI Analytics

Double-platinum electrode, with glass shaft and two platinum pin sensors (Ø 1 mm). For detection of Bromine according to ASTM by potentiometric titration.

Supplier: Thermo Orion

The high performance ammonia ion selective electrode (ISE) allows fast, simple, economical, and accurate measurements of dissolved ammonia in aqueous solutions.

Supplier: Hach

Digital combination ORP/Redox probes with built-in temperature sensor. Ideal for measuring absolute mV values in wastewater, drinking water and general applications.

Supplier: SI Analytics

These reference electrodes are available with low maintenance plug heads or with fixed cables and free end.

Supplier: Mettler - Toledo

The DM143-SC is a durable, double-pin platinum electrode requiring zero maintenance. Primarily used for redox titrations of food constituents such as Vitamine C or free and total SO2 in wine.

Supplier: Hach

This digital, combination gas-sensing ammonia ion selective electrode (ISE) with replaceable membrane module, refillable outer body, double junction reference and built-in temperature sensor is intended for laboratory use.

Supplier: Hach

sensION+ 9652 is a half-cell (reference not integrated) chloride ion selective electrode with an epoxy body and non-replaceable crystalline membrane selective to chloride ions in solution.

Supplier: Hach

sensION+ 5055 is a combination platinum ORP electrode with a polycarbonate body and non refillable gel-electrolyte reference. It is dedicated for use with Hach sensION+ portable pH (mV) meters.

Supplier: Thermo Orion

These electrodes are designed for measuring cyanide ions in aqueous solutions quickly, simply, accurately and economically.

Supplier: Mettler - Toledo

pH electrodes with S7 or BNC connector.

Supplier: Thermo Orion

This surfactant half cell is a potentiometric sensor for end point detection in titrations of anionic or cationic surfactants in a solution. A potentiometric sensor, it is a surfactant-detecting electrode in anionic or cationic titration which is specifically designed for use on the Orion 960 Autochemistry system.

Supplier: Hach

Digital high-performance pH electrodes with Red Rod reference system and built-in temperature sensor.

Supplier: Mettler - Toledo

pH electrodes with S7, BNC or MultiPin™ (pH/temperature) connector.

Supplier: Hach

Robust digital puncture pH electrode with stainless steel body, Ag/AgCl reference system and built-in temperature sensor.

Supplier: Hach

These glass electrodes are compatible with Hach sensION+ benchtop pH meters (or any meter with a BNC connection). The PHG301 pH electrode should be used with Ag/AgCl or calomel reference electrodes.

Supplier: Mettler - Toledo

pH electrode with glass body and S7 screw head. Recommended for applications where the life time of the pH electrode is significantly shorter than the reference electrode.

Supplier: Mettler - Toledo

Robust and cost-effective electrodes, simple to operate.

Supplier: SI Analytics

When digital IDS sensors are connected to the measuring device, they automatically identify themselves with their serial numbers and type designation and transmit their calibration data to the device.

Supplier: Mettler - Toledo

These ion-selective half-cells (exception: Sodium-sensitive electrode) consist of two elements: a universal shaft and an ion-specific membrane module.

Supplier: SI Analytics

Ion selective indicator electrode for fluoride. With plug head and Ag/AgCl reference.

Supplier: Hach

sensION+ 5059 is a combination multi-parameter electrode for determination of pH, conductivity and temperature. It has a plastic body, non-refillable gel reference electrolyte and built-in temperature sensor.

Supplier: SI Analytics

These low-maintenance electrodes are ideal for measuring in drinking water, industrial water and sewage range.

Supplier: 3M MEDICAL

These monitoring electrodes feature a soft cloth backing and gentle adhesives which makes them ideal for use on fragile skin and on the tender skin of younger pediatric patients.