You searched for: Petroleum Industry Standards
Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.
Diesel surrogate and internal standards
Supplier: Restek
o-terphenyl, 2000 μg/ml in acetone, 1 ml/ampule, for internal standard
Expand 5 Items
Residual range calibration verification standard (CVS)
Supplier: Restek
SAE30 motor oil:SAE40 motor oil (1:1).
Expand 1 Items
DHA Naphthenes standard (26 components)
Supplier: Restek
This naphthenes standard is produced for refineries performing detailed hydrocarbon analysis (DHA) of crude oil feedstocks and fuels.
Expand 1 Items
DHA PiONA standard (133 components)
Supplier: Restek
This standard is produced for refineries performing Detailed Hydrocarbon Analysis (DHA) of crude oil feedstocks and fuels.
Expand 1 Items
ASTM D3606 quality control standard with sec-butanol internal standard (3 components)
Supplier: Restek
Contains three components, those are benzene, 2-butanol (sec-butyl alcohol) and toluene.
Expand 1 Items
Stoddard solvent standard
Supplier: Restek
Stoddard solvent, a petroleum distillate mixture of C7-C12 hydrocarbons, consists of three major groups of components: linear and branched alkanes-also known as paraffins (30 to 50%); cycloalkanes-also called cycloparaffins or naphthenes (30 to 40%); and aromatic hydrocarbons (10 to 20%).
Expand 1 Items
Alternate boiling point/carbon number distribution marker stock standard (9 components)
Supplier: Restek
The mix consists of (C6) n-hexane, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C28) n-octacosane, (C35) n-pentatriacontane, (C36) n-hexatriacontane.
Expand 1 Items
Creosote oil standard
Supplier: Restek
This is for total petroleum hydrocarbon pattern recognition of creosote oil.
Expand 1 Items
JP-8 military fuel standard
Supplier: Restek
JP-8 military fuel standard, 50000 μg/ml in methylene chloride, Pk Info: 1 ml/ampoule
Expand 1 Items
Motor oil composite standard
Supplier: Restek
Motor oil composite, 50000 μg/ml in methylene chloride, Pk Info: 1 ml/ampoule
Expand 1 Items
MA VPH surrogate standard (2,5-dibromotoluene)
Supplier: Restek
2,5-Dibromotoluene, 10000 µg/ml in P and T methanol, Pk Info: 1 ml/ampoule
Expand 1 Items
Biodiesel calibration standards
Supplier: Restek
The biodiesel component is methyl soyate.
Expand 10 Items
ASTM D3606 calibration standard #7 without internal standard (2 components)
Supplier: Restek
Contains two components, those are benzene and toluene.
Expand 1 Items
ASTM D3606 calibration standard #6 without internal standard (2 components)
Supplier: Restek
Contains two components, those are benzene and toluene.
Expand 1 Items
Residual range calibration standard (RCS)
Supplier: Restek
SAE30 motor oil:SAE40 motor oil (1:1).
Expand 1 Items
ASTM® D3606 calibration standard #1 with sec-butanol internal standard (3 components)
Supplier: Restek
Consists of three components, those are benzene, 2-butanol and toluene.
Expand 1 Items
JP-4 military fuel standards
Supplier: Restek
Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfies ISO requirements.
Expand 9 Items
TX TPH matrix spike mix (2 components)
Supplier: Restek
The mix consists of diesel fuel #2 composite, unleaded gasoline composite.
Expand 1 Items
Kerosene composite standards
Supplier: Restek
Kerosene composite standards are comprised of three separate sources blended in equal portions. It may exhibit lot-to-lot variation.
Expand 9 Items
Certified PAHs in diesel
Supplier: Restek
The mix consists of, acenaphthene, 2-methylnaphthalene, acenaphthylene, fluorene, naphthalene, 1-methylnaphthalene and phenanthrene.
Expand 1 Items
DRO/ORO range calibration standard, (12 components)
Supplier: Restek
This consists of n-decane (C10), n-dodecane (C12), n-tetradecane (C14), n-hexadecane (C16), n-octadecane (C18), n-eicosane (C20) ,n-docosane (C22) , n-tetracosane (C24), n-hexacosane (C26), n-octacosane (C28), n-triacontane (C30) and n-dotriacontane (C32).
Expand 1 Items
Calibration gas cylinders
Supplier: M S A
The gas mixture in calibration gas cylinder is certified to be prepared gravimetrically, using NIST traceable weights. The lot number and nominal value of the gas constituents in volume, percent by mass, PPM, or volume is specified on the cylinder.
Expand 1 Items
MA VPH matrix spike mix with surrogate rev. 1.1 (July 2004) (16 components)
Supplier: Restek
The mix consists of (C5) n-pentane, (C9) n-nonane, (C10) n-decane, benzene, n-butylcyclohexane, 2,5-dibromotoluene (SS), ethylbenzene, 2-methylpentane, methyl tert-butyl ether, naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane, m-xylene, o-xylene, p-xylene.
Expand 1 Items
Weathered diesel fuel #2 kit
Supplier: Restek
The kit consists of different standards.
Expand 1 Items
ASTM D3606 calibration standard #6 with sec-butanol internal standard (3 components)
Supplier: Restek
Consists of three components, those are benzene, 2-butanol and toluene.
Expand 1 Items
ASTM D3606 calibration standard #7 with sec-butanol internal standard (3 components)
Supplier: Restek
Consists of three components, those are benzene, 2-butanol and toluene.
Expand 1 Items
ASTM D3606 calibration standard #4 without internal standard (2 components)
Supplier: Restek
The mix consists of benzene (0,67% vol/vol), toluene (5% vol/vol).
Expand 1 Items
ASTM® D3606 calibration standard #5 without internal standard (2 components)
Supplier: Restek
The mix consists of benzene (0,33% vol/vol), toluene (2,5% vol/vol).
Expand 1 Items
DHA isoparaffins standard
Supplier: Restek
This standard is produced for refineries performing Detailed Hydrocarbon Analysis (DHA) of crude oil feedstocks and fuels.
Expand 1 Items
Jet fuel A standards
Supplier: Restek
Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfies ISO requirements.
Expand 9 Items
: VWR Collection
: Integra
: VWR Chemicals
: VWR Collection
: Integra
: SCIENTIFIC INDUSTRIES ELMIS
: VWR Collection
: VWR Collection
: Industrial Physics
: VWR Collection
: VWR Collection
: VWR Collection
: EPPENDORF
: Integra
: GETT GERATETECHNIK
: HENKE SASS WOLF