You searched for: Multi-Element Standards

Supplier: Thermo Fisher Scientific

Multi-Element Standard, ICP-MS Internal Standard for 6020, Specpure®, Specpure®, Application: ICP-MS standards

Supplier: Thermo Fisher Scientific

These standards are applicable for the determination of elements as dissolved elements in ground waters, surface waters, and drinking water, and total recoverable elements in these waters as well as wastewaters, sludges, and soils samples.

Supplier: Thermo Fisher Scientific

Multi-Element Standard, Heavy Metals, Plasma Standard Solution, Ag, As, Ba, Cd, Cr, Hg, Pb, Se, 100 µg/ml, Specpure®, Matrix: 5% HNO₃, Application: ICP standards

Supplier: Thermo Fisher Scientific

Multi-Element Standard, ICP-MS Tuning Standard Solution for HP®, Specpure®, Matrix: 5% HNO₃, Application: ICP-MS standards

Supplier: Thermo Fisher Scientific

Semiquantitative Standard 1, Specpure® is used as a standard for inductively coupled plasma and direct current plasma (DCP) emission spectrometry for the analysis of trace elements in biomedical and environmental samples.

Supplier: Thermo Fisher Scientific

Multi-Element Standard, Alkali Metals, Plasma Standard Solution, Ba,Be,Ca,Cs,K,Li,Mg,Na,Rb,Sr, 100 μg/ml, Specpure®, Matrix: 5% HNO₃, Application: ICP standards

Supplier: Thermo Fisher Scientific

Multi-Element Standard, ICP-MS calibration standard solution for 6020 CLP-M, Specpure®, Matrix: 2% HNO₃/tr. HF, Application: ICP-MS standards

Supplier: Thermo Fisher Scientific

Multi-Element Standard, ICP-MS Tuning Standard Solution for 6020 CLP-M, Specpure®, Matrix: 2% HNO₃, Application: ICP-MS standards

Supplier: Thermo Fisher Scientific

Multi-Element Standard, ICP-MS Interference Check Standard solution B for 6020, Specpure®, Specpure®, Matrix: 5% HNO₃, Application: ICP-MS standards

Supplier: Thermo Fisher Scientific

Multi-Element Standard, Interference check standard AB(ICS-AB) solution, Specpure®, Matrix: 5% HNO₃/tr. (CHOH)₂(COOH)₂, Application: ICP standards

Supplier: Thermo Fisher Scientific

Multi-Element Standard, ICP-MS Stock Standard Solution A for 200.8, Rev. 5.4, Specpure®, Matrix: 5% HNO₃/tr. (CHOH)₂(COOH)₂, Application: ICP-MS standards

Supplier: Thermo Fisher Scientific

Multi-Element Standard, ICP-MS soil spike standard solution for 6020 CLP-M, Specpure®, Matrix: 2% HNO₃/tr. HF, Application: ICP-MS standards

Supplier: Thermo Fisher Scientific

Multi-Element Standard, ICP-MS Stock Standard Solution A for 200.8, Rev. 4.4, Specpure®, Matrix: 5% HNO₃/tr. (CHOH)₂(COOH)₂, Application: ICP-MS standards

Supplier: Thermo Fisher Scientific

Cd, Co, Cr, Cu, Fe, Mn, Ni, V, Zn @ 100 µg/ml

Supplier: Thermo Fisher Scientific

Pre-mixed matrix modifier are designed for use with graphite furnace atomic absorption (GFAA).

Supplier: Thermo Fisher Scientific

Pre-mixed matrix modifier are designed for use with graphite furnace atomic absorption (GFAA).

Supplier: VWR Chemicals

15 components: Al 50 ug/ml, As 50 ug/ml, Ba 50 ug/ml, Cd 50 ug/ml, Co 50 ug/ml, Cr 50 ug/ml, Cu 50 ug/ml, Mn 50 ug/ml, Mo 50 ug/ml, Ni 50 ug/ml, Pb 50 ug/ml, Se 50 ug/ml, Sr 50 ug/ml, Zn 50 ug/ml, K 500 ug/ml in 5% HNO₃

Supplier: USP

USP Reference Standards are specified for use in conducting official USP–NF tests and assays. USP also provides Reference Standards specified in the Food Chemicals Codex as well as authentic substances—high-quality chemical samples—as a service to analytical, clinical, pharmaceutical and research laboratories. To confirm accuracy and reproducibility, USP Reference Standards are rigorously tested and evaluated by multiple independent laboratories including USP, commercial, regulatory, and academic labs. USP also provide publicly available, official documentary standards for pharmaceutical ingredients in the USP–NF that link directly with our primary reference standards.

Supplier: Thermo Fisher Scientific

This LabPak™ comes with all the necessary standard concentrates needed for the day to day operations to complete the EPA established CLP Protocol requirements. Minimal mixing and dilution of the standard concentrates make it easy by saving you time and money in preparing all the necessary CLP Protocol Standards.

Supplier: PerkinElmer

Multi-Element Standard, Dual-detector, 1×125 ml

Supplier: PerkinElmer

Multi-Element Standard, Multi-element standard, 10 components, Matrix: 2% HNO₃, Application: ICP standards

Supplier: PerkinElmer

Multi-Element Standard, Interference check standards, Contents: 1000 mg/L: Sb, Application: ICP standards

Supplier: PerkinElmer

Multi-Element Standard, Initial calibration verification standard 1, (5% HNO₃/tr Tartaric Acid), 125 ml, 1000 mg/l: Ca, Fe, K, Mg, Na, Sr and 10 mg/l: Ag, Al, As, Ba, Be, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Se, Tl, V, Zn, Th, U, Matrix: 5% HNO₃

Supplier: CPACHEM

ICP standards used for Al, Ag, As, B, Ba, Be, Bi, Ca, Cd, Cs, Co, Cr, Cu, Fe, In, K, Li, Mg, Mn, Mo, Na, Ni, Nb, Pb, Rb, Sb, Se, Sr, Ti, Tl, V, U, Zn.

Supplier: CPACHEM

Multi-Element Standard, ICP multi-element standard, 100 mg/l, (28 elements in in 5 % HNO₃) Al, Ag, As, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Sb, Se, Sr, Ti, Tl, V, Zn, Matrix: 5% HNO₃, Application: ICP standards

Supplier: CPACHEM

ICP-MS calibration standard - 4 components

Supplier: CPACHEM

ICP QC standards used for Al, Ag, As, B, Ba, Be, Bi, Ca, Cd, Cs, Co, Cr, Cu, Fe, In, K, Li, Mg, Mn, Mo, Na, Ni, Nb, Pb, Rb, Sb, Se, Sr, Ti, Tl, V, U, Zn. 1 mg/l for 33 elememts.

Supplier: Agilent

Multi-Element Standard, Multi-element calibration Standard-3, 100 ml, (10 elements in diluted 10% hydrochloric acid and 1% nitric acid) Sb, Au, Hf, Ir, Pd, Pt, Rh, Ru, Te, Sn, 10 mg/L, Matrix: 10% HCl, Application: ICP standards

Supplier: Agilent

Agilent offers a comprehensive range of single and multi-element standards, tuning solutions, ionisation buffers and environmental standards for atomic spectroscopy.

Supplier: Agilent

It offers a comprehensive range of single and multi-element standards, tuning solutions, ionisation buffers and environmental standards for atomic spectroscopy.