317 Results for: "Single-use Temperature Sensor"

Supplier: tempmate

Intuitive multi-use temperature logger for reliable low-cost cold chain monitoring. For temperature and humidity recording with internal or external temperature and humidity sensor, multifunction display and automatic PDF report generation.

Supplier: KNICK

These portable, intuitive meters, with analogue and digital Memosens® sensor inputs, are suitable for daily routine pH/°C and mV measurements. Their versatile functionality, robustness and large selection of sensors make them the perfect choice for both laboratory and process applications. Waterproof according to IP 66/IP 67.

Supplier: tempmate

Intuitive multi-use temperature and humidity logger for reliable low-cost cold chain monitoring. For temperature and humidity recording with internal or external temperature and humidity sensor, multifunction display and automatic PDF report generation.

Supplier: Hach

These digital combination electrodes feature a built-in temperature sensor and are either refillable or non refillable. They can be used with all Hach HQd™ meters.

Supplier: tempmate

Pre-programmed. Intuitive multi-use temperature logger for reliable low-cost cold chain monitoring. For temperature and humidity recording with internal or external temperature and humidity sensor, multifunction display and automatic PDF report generation.

Supplier: VWR Collection

These highly accurate thermometers monitor temperatures simultaneously in refrigerators and freezers, two refrigerator locations. Temperature-buffered bottle sensor eliminates transient temperature changes when refrigerator door is opened. Patented unit fulfils all CDC thermometer and vaccine thermometer requirements. They may also be used in water baths, heating blocks and incubators.

Supplier: VWR Collection

The VWR® Traceable® memory loc USB data logging DUAL hygrometer with fixed memory structure monitors temperature and humidity readings in the laboratory with both internal and external sensors. This device can be used in 21 CFR 11 environments.

Supplier: tempmate

Pre-programmed. Intuitive multi-use temperature and humidity logger for reliable low-cost cold chain monitoring. For temperature and humidity recording with internal or external temperature and humidity sensor, multifunction display and automatic PDF report generation.

Supplier: EUTECH

Conductivity/temperature sensor with epoxy body and stainless steel rings. For use with the following Eutech meters: CON 700 / PC 700 / CON 2700 / PC 2700.

Supplier: Hach

IntelliCAL™ ISENA381 is a digital combination sodium ion selective electrode (ISE) with a refillable double junction reference and built-in temperature sensor. The probe is intended for laboratory use.

Supplier: SenseAnywhere

This smart probe featuring a digital SenseAnywhere Bus interface has been especially designed to be used in ultra-low environments for monitoring cryogenic applications down to -200 °C. The class A wire wound ceramic Pt100 sensor ensures accurate measurements over a wide temperature range. Due to the digital interface this probe with its own serial number and integrated electonics can be calibrated. Calibrated SAB sensors can be easily hot swapped offering a big advantage and cost savings for recalibration of sensors.

Supplier: IKA

Compact incubator shakers designed for safe, unattended operation in a temperature controlled environment. The units have a large LED display for speed, temperature and timer. An integrated PID temperature control allows the use of PT1000 temperature sensors to ensure highly accurate temperature control. The electronically controlled incubators come equipped with RS232 and USB ports for PC interface. All functions can be controlled and documented using optional labworldsoft® software. In addition the  KS 3000 ic control has a built in cooling coil for connection to an external cooling unit.

Supplier: VWR Collection

This thermometer ensures proper cleaning by providing proof that the required temperature of 82 °C is met during dishwashing. Designed for applications in wet laboratories, wash-down areas and outdoors. Used in food, pharmaceutical, cleanrooms, and industrial laboratories. Waterproof metal with internal stainless steel sensor.

Supplier: COMARK

Certified test capsules can be used for quick checking of the thermometer's function against specifications. They are connected to the thermometer instead of a sensor and consist of a resistor that corresponds exactly to a given temperature.

Supplier: EBRO

The EBI 12-T237 temperature data logger is ideal for versatile routine checks in the food and pharmaceutical industries. With an extended measuring range, high-quality PT1000 sensor, IP 68 protection class and the option of use in autoclaves, it ensures reliable pasteurisation control and food safety.

Supplier: Hach

This digital, combination gas-sensing ammonia ion selective electrode (ISE) with replaceable membrane module, refillable outer body, double junction reference and built-in temperature sensor is intended for laboratory use.

Supplier: witeg Labortechnik

Heating mantles with aluminium exterior and fabric interior. The integrated K-type thermo-sensor is basically embedded (except fabric mantles) which enables precise control of the mantles when used together with remote digital controller. External thermo-sensor is available, which enables precise control of the temperature of liquid sample in the vessel when used together with remote digital controller.

Supplier: Thermo Orion

This electrode with built-in temperature sensor is ideal for any application where the use of metallic reference electrodes would contaminate the samples. Compared to conventional electrodes, the proven ROSS reference system exhibits superior stability in measurements, faster response, greater accuracy and precision when measuring samples that vary in temperature or when calibrating in temperatures that differ from the samples.

Supplier: VWR Collection

Remote temperature probes for circulator use with a chiller. Allows points of control to be switched from inside a chiller to a remote location. Compensates for heat loss through tubing between the circulator and the control point. Platinum RTD sensor with stainless steel sheath. Rubber coupling with 25,4 mm Ø, connects sheath to flexible cable. Probe cable ends in a DB9 female plug.

Supplier: EPPENDORF

Exchangeable in just seconds. Individually sensor-controlled SmartBlocks are your solution for maintaining accurate, uniform temperatures. A wide variety of these flexible thermoblocks for all common laboratory vessels support a broad range of applications - for use with Eppendorf ThermoMixer® C and ThermoStat C.

Supplier: EBRO

The EBI 11-T235 temperature data logger is ideal for versatile routine checks in the food and pharmaceutical industries. With an extended measuring range (–30 to +150 °C), high-quality PT1000 sensor, very small size that allows it to fit easily into bottles or small packaging, IP68 protection class, and the option of use in autoclaves, it ensures reliable pasteurisation control and food safety.

Supplier: MEMMERT

This steriliser complies with all relevant standards and regulations for medical products and guarantees reliable programme sequences, irrespective of the load and chamber volume. Especially due to the SetpointWAIT function the validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the programme is only continued when the setpoint temperature has been reached. Precisely maintaining the sterilisation time and thus completely killing off even highly resistant microorganisms is therefore guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable Pt100 temperature sensors. In this case, sterilisation only begins when the setpoint temperature has been reached at all measurement points – that is, in the load. For the special application of depyrogenisation, the hot-air steriliser is absolutely ideal. The SF models are equipped with single display.

Supplier: EBRO

The EBI 11-T210 temperature data logger is ideal for versatile routine checks in the food and pharmaceutical industries. With an extended measuring range (–30 to +140 °C), high–quality PT1000 sensor, very small size that allows it to fit easily into most bottles or small packaging, robust IP 68 protection class, and the option of use in autoclaves, it ensures reliable pasteurisation control and food safety.

Supplier: VWR Collection

Compact stirrers with a ceramic glass plate provide excellent chemical resistance. Units feature digital error code display, a 'hot' top indicator to warn users that surface is hot, a fixed safety circuit that shuts off the heater if temperature rises above 550 °C, and three operating modes to choose from (standard, safe and adjustment protection). Stirrers have a speed display scale and optional capability to connect directly to a PT1000 temperature sensor; when using this functionality, control accuracy in the medium is ±0,5 °C.

Supplier: DICKSON

The data loggers is self-contained with high speed USB connectivity, high/low LED alarm, an internal sensor for recording air temperatures and a replaceable battery for accurate, easy-to-use and PC-based recording. The polycarbonate casing, compact size and rugged design allows for use in numerous applications like regulatory compliance, HVAC balancing, warehouse mapping, process control.

Supplier: IKA

Digital block heaters which hold from one up to four aluminum blocks, provide precise temperature control in small vessels. The PT1000 temperature sensor allows temperature control directly in the sample vessel. It is used with PCR tubes, PCR strips, Greiner tubes, microplates and cuvettes. The block heaters are ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood/urea nitrogen determinations and in situ hybridisations.

Supplier: MEMMERT

These sterilisers comply with all relevant standards and regulations for medical products, and guarantee reliable program sequences, irrespective of the load and chamber volume. With the SetpointWAIT function validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the program only continues when the set point temperature has been reached. Precisely maintaining the sterilisation time and thus completely killing off even highly resistant microorganisms is, therefore, guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable PT100 temperature sensors. In this case, sterilisation only begins when the set point temperature has been reached at all measurement points – that is, in the load. For special applications such as depyrogenisation, this hot air steriliser is absolutely ideal. SFplus models are equipped with TwinDISPLAY.

Supplier: MEMMERT

This steriliser complies with all relevant standards and regulations for medical products and guarantees reliable programme sequences, irrespective of the load and chamber volume. Especially due to the SetpointWAIT function the validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the programme is only continued when the setpoint temperature has been reached. Precisely maintaining the sterilisation time and completely killing off even highly resistant microorganisms is therefore guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable PT100 temperature sensors. In this case, sterilisation only begins when the setpoint temperature has been reached at all measurement points – that is, in the load. For the special application of depyrogenisation, the hot-air steriliser is ideal.

Supplier: schuett-biotec GmbH

The Schuett Solaris is the perfect solution to avoid using naked flames or if gas cartridges are not available. The unit uses standard electrical power and reaches the safe working temperature of 900 to 1300 °C within seconds. No warm-up time, no excess heat, no energy consumption between work cycles. Start is generated by an infra-red sensor, which allows efficient one-handed operation. The integrated timer can be set to 5 or 7 s. Pathogenic material is kept inside the sterilisation chamber. No spreading, no sooting. Ideal for use in Laminar Flow Cabinets. Working angle can be adjusted. Robust and sturdy, no parts subject to mechanical wear, ideal for mobile operation in the field.

Supplier: HUBER

The Variostat can control the temperature of any size bath from −30 to 150 °C. The special construction gives the user flexibility in a number of different applications. With the infinitely controllable VPC pressure or suction pump, circulation in the respective bath sizes can be adapted for optimum results. Furthermore, the pump pressure for external applications can be set and controlled using the menu control with an optional pressure sensor. Insulated bath vessels are available in stainless steel as an accessory in three standard sizes or can be custom made with any desired dimensions.