11408 Results for: "Restek"
Calibration check mix, 8240/8260 (6 components)
Supplier: Restek
Mix contains chloroform, 1,1-dichloroethene, 1,2-dichloropropane, ethylbenzene, toluene, vinyl chloride.
Expand 1 Items
Capillary columns, MXT®-624
Supplier: Restek
MXT®-624 Siltek®-treated stainless steel columns are application specific columns for volatile organic pollutants. Recommended in U.S. EPA methods for volatile organic pollutants.
Expand 4 Items
Capillary columns, MXT®-502.2
Supplier: Restek
These Siltek®-treated stainless steel MXT®-502.2 columns enable to quantify all compounds when using a mass spectrometer or a PID in tandem with an ELCD. A 105 m column can separate the light gases specified in EPA methods without subambient cooling.
Expand 4 Items
Capillary columns, Rtx®-35 (fused silica)
Supplier: Restek
General-purpose columns for organochlorine pesticides, PCB congeners (e.g. Aroclor mixes), herbicides, pharmaceuticals, sterols, rosin acids, phthalate esters.
Expand 17 Items
Capillary columns, MXT®-35 (Siltek®-treated stainless steel)
Supplier: Restek
MXT®-35 columns are general purpose columns for organochlorine pesticides, PCB congeners (e.g. Aroclor mixes), herbicides, pharmaceuticals, sterols, rosin acids and phthalate esters.
Expand 2 Items
Internal standard, TO-14A
Supplier: Restek
TO-14A internal standard or tuning mix has 4 components.
Expand 1 Items
Air calibration standard mix, TO-15
Supplier: Restek
The calibration mix TO-15 has 65 components. High-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas.
Expand 1 Items
HPLC columns, Allure® Basix (USP L10)
Supplier: Restek
Highly retentive propyl cyano phase. Excellent choice for basic compounds and for analytes containing amine group functionality.
Expand 4 Items
PCB kit #2
Supplier: Restek
This kit contains Aroclor 1016, Aroclor 1221, Aroclor 1232, Aroclor 1242, Aroclor 1248, Aroclor 1254, Aroclor 1260.
Expand 1 Items
Gasoline surrogate and internal standards, VOA Mixes
Supplier: Restek
Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfies ISO requirements.
Expand 6 Items
VOA internal standard mix (3 components)
Supplier: Restek
Mix contains: Bromochloromethane (74-97-5), 1,4-Difluorobenzene (540-36-3), Chlorobenzene-d5 (3114-55-4).
Expand 1 Items
LC reversed phase test mix #1 (4 components)
Supplier: Restek
Routine analysis using this mix can assist in determining the need to perform column and/or system maintenance.
Expand 1 Items
FAME #8 mix
Supplier: Restek
This mixture can be used for quantification (AOCS method CE 1a–13) and approximate the compositions of oils.
Expand 1 Items
FAME #13 mix
Supplier: Restek
This mixture can be used for quantification (AOCS method CE 1a–13) and approximate the compositions of oils.
Expand 1 Items
FAME #17 mix (5 components)
Supplier: Restek
This mixture can be used for quantification (AOCS Method CE 1a–13) and approximate the compositions of the types of oils like linseed, perilla, hempseed and rubberseed oil.
Expand 1 Items
FAME #14 mix
Supplier: Restek
This mixture can be used for quantification (AOCS method CE 1a–13) and approximate the compositions of oils.
Expand 1 Items
USP <467> calibration mix #7
Supplier: Restek
The mix consists of chloroform (60 μg/ml), 1,4-dioxane (380 μg/ml), methylene chloride (dichloromethane) (600 μg/ml) and trichloroethene (80 μg/ml).
Expand 1 Items
PA DEP UST standard (11 components)
Supplier: Restek
Standard contains benzene, 1,2-dibromoethane (EDB), 1,2-dichloroethane, ethylbenzene (100-41-4), isopropyl benzene (cumene), methyl tert-butyl ether (MTBE), naphthalene, toluene, m-xylene, o-xylene, p-xylene.
Expand 1 Items
Pesticide standard mix B (11 components)
Supplier: Restek
Consists of 11 components, those are aldrin, β-bhc, δ-bhc, cis-chlordane, trans-chlordane, 4,4'-dde, endosulfan ii, endosulfan sulfate, endrin aldehyde, endrin ketone and heptachlor epoxide.
Expand 1 Items
Piston seal insertion tool, HPLC pumps
Supplier: Restek
Piston seal insertion tool is an alternative for paper clip and screw to remove the worn seals from the HPLC pump.
Expand 1 Items
Septa holder kit
Supplier: Restek
This kit can be used for Thermo Scientific TRACE, 8000, 8000 TOP and Focus SSL. It is made from high quality stainless steel.
Expand 1 Items
Hydrogen flashback arrestor
Supplier: Restek
This hydrogen flashback arrestor is a special gas safety device, it cuts to stop the flame or reverse flow of gas back up into the equipment or supply line and it prevents the user and equipment from damage or explosions.
Expand 1 Items
Cylinder valve wrench
Supplier: Restek
This specially designed wrench enables easy opening of cylinder valves that are fitted with a hand wheel. It is also suitable for removing difficult cylinder caps.
Expand 1 Items
Crimp seals with septa for 2 ml crimp top vials
Supplier: Restek
Chromatography vial closure, Aluminium, Ø: 11 mm, Type: Aluminum, yellow, Septum: PTFE/red rubber
Expand 23 Items
Capillary columns, Rxi®-XLB (fused silica)
Supplier: Restek
Rxi®-XLB (fused silica) columns are ideal for many GC-MS applications, including pesticides, PCB congeners (e.g., Aroclor mixes), PAHs.
Expand 4 Items
Plug valves, Parker Balston® shut-off gas valve
Supplier: Restek
These shut-off plug valves work well in any application which requiring throttling or on/off operations.
Expand 4 Items
Replacement needles for Luer lock syringes, gas-tight (SGE)
Supplier: Restek
Needle, Replacement needles, metal hub, Gauge: 22, Length: 51 mm, Type of tip: Needle point style 3
Expand 3 Items
Inlet kits for Agilent GC, FastPack™
Supplier: Restek
These FastPack™ inlet kits for Agilent GC make routine injection port maintenance easy.
Expand 3 Items
Gas-tight syringes, PTFE tipped (SGE)
Supplier: Restek
These tips are used for Agilent autosamplers 7673, 7683, 7693A, and 6850.
Expand 3 Items
Passive air samplers
Supplier: Restek
These passive air samplers provide accurate integrated sampling without a sampling pump.