1238 Results for: "LABCONCO"

Supplier: LABCONCO

Epoxy-coated steel blower transition adapters fit all Labconco coated steel blowers.

Supplier: LABCONCO

Purifier Vertical Clean Benches direct HEPA-filtered air downward over the work area to provide ISO Class 5 (formerly Class 100) conditions and protect your work from particulate contamination. Applications for clean benches include plant tissue culture, media plate preparation, electronics inspection, medical device assembly and pharmacy drug preparation.

Supplier: LABCONCO

Hollow fiber final filter, 0,22 µm, for attachment to the dispensing valve

Supplier: LABCONCO

Tranporting cart made of stainless steel with two removable polished type 304 stainless steel pans that are 51 mm deep on three sides with one open side for easy equipment transfer from countertop to cart holds a variety of laboratory supplies, equipment and miscellaneous containers.

Supplier: LABCONCO

Evaporator, centrifugal, PTFE-coated aluminium block for 110 tubes Ø 12 mm, max. height 150 mm

Supplier: LABCONCO

This HEPA-filtered glove box has inlet and outlet HEPA filters and provides a leak-tight physical barrier to protect the operator from hazardous airborne particulates and powders.

Supplier: LABCONCO

Solid epoxy work surface, flat, no cupsink cutout for 4 inch width hood, enclosures, glove boxes, 1220×760×30 mm, 61 kg

Supplier: LABCONCO

Gloves for glove boxes, Neoprene, Black, Thickness: 0,015 gauge, Glove size: 8,5

Supplier: LABCONCO

These glove boxes provides a leak-tight environment to perform work with contamination-sensitive materials under vacuum or in an inert environment.

Supplier: LABCONCO

Solid epoxy work surface, flat, no cupsink cutout, for 30 inch width laboratory hoods, 760×760×30 mm, 39 kg, For: Laboratory Hoods, Fiberglass 30

Supplier: LABCONCO

FreeZone® benchtop shell freezers provide a compact system for prefreezing samples for lyophilization.

Supplier: LABCONCO

Moisture monitor (dew point measurements), 0 - 6000 ppm; incl. meter, probe, attachment plug, and calibration stand; for placement inside the glove box’s main chamber; 140×203×46 mm, 230 V, 50/60 Hz

Supplier: LABCONCO

Racks and supports hold test tubes, flasks and microwell plates for pre-freezing and freeze drying samples; clear canister holds chemical traps.

Supplier: LABCONCO

Telescoping base stand, epoxy coated steel, with toe-locking casters, for 91,4 cm enclosures, 45 kg, 914×737×699/851 mm

Supplier: LABCONCO

The FreeZone® bulk and stoppering tray dryers have a stainless steel interior and epoxy coated, stainless steel exterior. Units include three probes for monitoring sample and shelf temperature. Microprocessor controlled temperature programming from −40 to +40 °C during ramping and holding in stoppering tray dryers, whereas in bulk dryers a microprocessor maintains the system temperature within 3 °C of the set point (maximum 60 °C). Units have an LCD display and audible/visual alarm indication for temperature and vacuum changes.

Supplier: LABCONCO

The AtmosPure™ Re-Gen gas purifier produces an ultrapure inert atmosphere for materials sensitive to moisture and/or oxygen by circulating an inert gas and removing oxygen and moisture inside the box.

Supplier: LABCONCO

The refrigerated CentriVap centrifugal concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature. The concentrator combines a refrigeration system that cools to −4 °C with a heater that warms to 100 °C to achieve the user's desired set point temperatures. With an epoxy-coated aluminum chamber.

Supplier: LABCONCO

XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters, carbon filters, or a combination of both HEPA and carbon filters.

Supplier: LABCONCO

Evaporator, Centrifugal, Glass trap, 2550 ml, for use in FreeZone freeze dry units

Supplier: LABCONCO

XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters.

Supplier: LABCONCO

Accessory for freeze dryer, Heated chamber with ¹/₂" thick, clear acrylic cover, 229×267 mm, 230 V, for Freezone® 4.5A, 4.5P, 6, 12 and 18

Supplier: LABCONCO

Fully-featured, energy-efficient fume hoods provide an environmentally-friendly solution to ducted fume hoods while simplifying installation due to their compact footprint.

Supplier: LABCONCO

Heated product shelves with clear chamber for drying bulk samples, or drying serum bottles, vials or microplates. Chamber connects to a FreeZone® freeze dryers for control and recording of the shelf temperature from the Lyo-Works display.

Supplier: LABCONCO

End-Zone™ provides an alternative to visual inspection making it easy to determine when freeze drying is complete.

Supplier: LABCONCO

Accessory for Freeze Dryer, 14-Port manifold, 304 stainless steel with fourteen neoprene valves and latching pin, accomodates both 1/2” and 3/4” adapters, 617×269×262 mm

Supplier: LABCONCO

Storage cabinet accessories, Protector®, Solvent vent kit consisting metal flexible hose Ø 38 mm, two hose clamps and slip fit outlet adapter

Supplier: LABCONCO

These kits are for thimble ducting class II, type A2 biosafety cabinets.

Supplier: LABCONCO

WaterPro RO stations feature large capacity filters and membrane to deliver high-quality reverse osmosis (RO) purified water (type III). RO purified water is ideal for laboratory applications such as reagent preparation and glassware rinsing. The units be connected to glassware washers to provide purified rinse water.

Supplier: LABCONCO

Designed to handle the lyophilisation needs of research laboratories. Collectors that reach −50 °C are available with capacities from 1 to 18 litres. Cascade systems in 2,5, 4,5, 6 and 12 litre collector capacities that reach −84 °C are ideal for freeze drying samples with low eutectic temperatures. The FreeZone® −105 °C bench top freeze dryer systems are suitable for samples with very low eutectic points including ones containing small amounts of methanol or ethanol.

Supplier: LABCONCO

Ionizer fan, anti-static, for 230 V units, 50/60 Hz operation