Supplier: LABCONCO

Circulation tubing kit, flexible hose, neoprene lined

Supplier: LABCONCO

HPLC/Hybrid polishing kit

Supplier: LABCONCO

CentriVap® vacuum concentrators are available as complete systems or system packages. The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, and so on). Other models feature Heat Boost, which surrounds the chamber wall, to further speed evaporation of high boiling point solvents.

Supplier: LABCONCO

Rotor for 12×15 ml vials (Ø 20 mm × 70 mm), PTFE coated aluminium

Supplier: LABCONCO

The Basic™ hood is ideal for rooms with ceilings below 2,4 m, 203,2 mm and for shallow countertops with 200 V,50 Hz

Supplier: LABCONCO

The Logic® Vue is a specialised class II enclosure providing personnel and product protection for large automated instruments such as liquid handlers. The Logic® Vue provides laminar ISO 5 air.

Supplier: LABCONCO

XPert TXE Equipment Enclosures are designed to address the needs of pharmaceutical research and quality control laboratories.

Supplier: LABCONCO

XPert weigh boxes have inlet and outlet HEPA filters and provide a leak-tight physical barrier to protect the operator from hazardous airborne particulates and powders.

Supplier: LABCONCO

Purifier® Logic®+ type B2 biosafety cabinets combine ergonomics, comfort and safety.

Supplier: LABCONCO

These cabinets support fume hoods and safely store and vent acids and also other corrosive liquids.

Supplier: LABCONCO

Purifier Logic+ Type A2 biosafety cabinets combine ergonomics, comfort and safety.

Supplier: LABCONCO

For use with Basic™ 47, Basic 70, Fiberglass 30, Protector® XStream®, Protector Premier™, Protector ClassMate®, Protector PVC perchloric acid, protector stainless steel perchloric acid, logic+, logic, cell logic, puriCare procedure stations and protector radioisotope laboratory hoods.

Supplier: LABCONCO

Accessory for Freeze Dryer

Supplier: LABCONCO

FlaskScrubber glassware washers are designed to wash and dry narrow-neck and general purpose labware. They have a lower spindle rack that holds up to 36 pieces of primarily narrow-neck glassware such as volumetric flasks. Water and detergent are pumped through the spindles to reach the innermost areas of your glassware. Forced air drying through the spindles ensures thorough drying inside and out. Specialized inserts for pipets, BOD bottles, petri dishes, culture tubes and small utensils enhance the FlaskScrubber's versatility. The washer may be outfitted with an upper standard or spindle rack to increase capacity. FlaskScrubber is a viable option for cleaning and reuse of glassware used for trace metal, volatile organic and semi-volatile organic compounds.

Supplier: LABCONCO

These FreeZone® small tray dryers provide precise control and program flexibility for consistent performance and are designed for lyophilising small to moderate bulk sample loads or numerous sample batches.

Supplier: LABCONCO

Safety sleeves, PE, Ø×L 914×457 mm, 0,038 mm thickness

Supplier: LABCONCO

This filtered glove box with fibreglass liner provides inlet and outlet HEPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials. The glove box may also be appropriate for use as a containment isolator for applications that include compounds assigned ISO 4 and ISO 5 Banding Levels.

Supplier: LABCONCO

Stand, Unassembled base stands, in epoxy coated steel, nominal width of 1524 mm, 24,9 kg, with 4 leveling feet

Supplier: LABCONCO

These glove boxes with stainless steel liner provide inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials. Available with two or four glove ports (double version).

Supplier: LABCONCO

These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.

Supplier: LABCONCO

SpillStopper™ work surface, right rear cupsink cutout, 1219×762×32 mm, 50 kg, For: Laboratory Hoods, Protector®

Supplier: LABCONCO

Storage cabinet accessory, Protector®, Interior shelf kit, 61 mm Protector® acid storage cabinets

Supplier: LABCONCO

Accessory for Freeze Dryer, Heated shelf with sensor, for bulk tray dryers, 323×432×25 mm (suitable for operating at 230 V, 50/60 Hz)

Supplier: LABCONCO

WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

Supplier: LABCONCO

Required and replacement accessories for Protector filtered fume hoods. These accessories are for use with Labconco Protector Echo® and Airo® filtered fume hoods. For all filters and prefilters: The number of filters/prefilters required depends on the width of the hood and if it is an initial order or a replacement order.

Supplier: LABCONCO

Storage cabinets support fume hoods and used for storage and venting of small laboratory instruments, mild acids and other reagents.

Supplier: LABCONCO

Glassware washing machines, Retrofit kit upper rack

Supplier: LABCONCO

These PuriCare Open Access Transfer Station offer utmost efficiency for cage changing operations. Open access on two sides provides ample workspace for one or two operators to transfer animals from dirty cages to clean ones. This enclosure provides personnel, animal and environmental protection. HEPA-filtered vertical airflow provides Class 100 clean air in the work area to protect the animals from cross-contamination. At the same time, room air is drawn into grilles located on the work surface directly below the sash openings to ensure containment and protect the operator from allergens. All contaminated air inside the enclosure is filtered so that particulate-free air is exhausted back into the room, protecting the environment.

Supplier: LABCONCO

Mechanical or electrical pass-through kit, provides three pass-through ports with sealing ID ranges 0,230/0,395, 0,230/0,530 and 0,450/0,705, useful for sealing cords and plumbing (Requires installation and drill holes; installation kit 5240800 is recommended)

Supplier: LABCONCO

All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.