3311 Results for: "Hood, Monashee"

Supplier: LABCONCO

Basic Laboratory Hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Constructed of epoxy-coated steel, Basic Hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles.

Supplier: Bel-Art Products, a Part of SP

PE hood, clear acrylic window.

Supplier: 3M

The 3M™ S-series headcovers offer head and face protection, as well as providing eye and face protection from liquid splash and low energy impact (grade F). They are suitable for applications that require frequent replacement of the entire headgear assembly, such as pharmaceutical manufacturing and laboratory work, or in situations where there is less soiling of the outer fabric. All headcovers can be used in conjunction with 3M Powered and Supplied Air systems (e.g. Jupiter™ and Dustmaster™), thus offering respiratory protection.

Supplier: DuPont

These hooded overalls are made of Easysafe fabric, an optimised non woven PE fabric from DuPont. It is softer and with a more open structure than Tyvek®. It is therefore less protective than Tyvek® (L1431N), but offers adequate Type 5 and 6 barrier protection and remains both air and moisture vapour permeable.

Supplier: THERMO ELECTRON LED

Shaking Bath, Large gassing hood, 285×288 mm

Supplier: BioAir S.p.A.

Additional socket

Supplier: VWR Collection

Rocking platform shaker with low profile design can be used in most fume hoods and incubators. The cast aluminium base offers durability and stability, the spill resistant design channels fluids away from internal components. Precise speed control provides smooth, low speed rocking motion down to one min⁻¹.

Supplier: 3S ARBEITSSCHUTZ

Single use hood with shoulder cover. Made from breathable Tyvek®.

Supplier: LABCONCO

Solid epoxy work surface, flat, no cupsink cutout for 4 inch width hood, enclosures, glove boxes, 1220×760×30 mm, 61 kg

Supplier: Azbil Telstar Technologies

UV lamp

Supplier: LABCONCO

Protector premier hoods are suitable for general chemistry applications and also explosion-proof models are available for laboratories with potentially explosive/flammable atmospheres. Hoods are available with a built-in standard fiberglass blower, or an explosion-proof fiberglass blower, or without a blower (remote blower sold separately).

Supplier: Azbil Telstar Technologies

Gas tap

Supplier: M S A

OptiTop hood, TH3 with hose, OptimAir® 3000

Supplier: Azbil Telstar Technologies

UV germicidal kit for AEOLUS V3

Supplier: Azbil Telstar Technologies

Oxygen tap

Supplier: Heidolph Instruments GmbH & Co.KG

Modular system for shaking, mixing and heating all in one. Any five kg shaker, e.g. Titramax 1000, Unimax 1010, Promax 1020, Duomax 1030 and Polymax 1040 can be combined with the incubator 1000 and a flat or high hood. The flat hood is recommended especially for microtitre plates, culture plates, small flasks, media bottles and Erlenmeyer flask up to 100 ml. The high hood is ideal for large flasks, media bottles and Erlenmeyer flasks up to 1000 ml. Hoods are made from transparent non-fogging PETG for easy viewing and immediate and convenient access to vessels. The heating module is ideal for use in molecular biology, bacteria cultivation and DNA analysis, it has temperature regulation via a PT100 sensor, and safety circuits prevent overheating.

Supplier: DRUMMOND

This controller is specifically designed for convenient, comfortable pipetting under a hood. Ideal for transfering liquids with the use of serological, volumetric and/or blow-out pipettes in either glass, plastic or something similar.

Supplier: BioAir S.p.A.

Polyurethane filter, 510×55,5 mm

Supplier: HONEYWELL SAFETY

Gridel protective hood is designed to isolate the wearer's respiratory tracs when working in surroundings with suspected or low air borne contamination.

Supplier: LABCONCO

The Protector® XL benchtop laboratory hoods offer superior design flexibility. Their panel liners are supplied in three depths to meet individual installation and application requirements. These are suitable for general chemistry applications.

Supplier: LAKELAND CLEANMAX APPAREL

Clean and Sterile disposable hoods are individually double-bagged and folded to promote easier gowning with less excursions.

Supplier: Dräger

Replacement filter set for Parat® 4700 excape hoods, incl. ABEK P3 filter and security seal, Parat®

Supplier: LABCONCO

These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The filling levels of waste containers in laboratory cupboards and workbenches can be reliably monitored. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: RPB SAFETY

The RPB T200 is a lightweight multi-purpose respirator designed specifically for the healthcare and life science industries, relieving workers of breathing difficulties and fatigue experienced with N95 use. Available with either a head harness or bump cap for head protection and multiple hood options, the T200 has the ability to adapt to different environments that need face protection and respiratory protection.

Supplier: LABCONCO

Oval cupsink, PP, 1,5” NPSM thread, mounts in work surface with cupsink cutout, 76×152 mm

Supplier: RPB SAFETY

The RPB T-Link respirator is a lightweight, multi-purpose TH3 respirator designed specifically for a range of industries, including healthcare, pharmaceutical, and industrial painting and coating. The advanced cradle provides unmatched comfort for the wearer, and keeps the lens and hood mounted solidly.

Supplier: RPB SAFETY

The RPB T-Link respirator is a lightweight, multi-purpose TH3 respirator designed specifically for a range of industries, including healthcare, pharmaceutical, and industrial painting and coating. The advanced cradle provides unmatched comfort for the wearer, and keeps the lens and hood mounted solidly.

Supplier: 3M

This hood is made of the same microporous laminated PP/PE fabric used in the 3M™ overall 4510. The hood offers a general barrier to non hazardous substances, with drapes over the shoulders offering excellent coverage.

Supplier: asecos

For safe handling of chemicals, protection from hazardous vapours and potentially explosive atmospheres. Hazardous material workplace (pharmaceutical exhausts).